{
    "id": "hephestos",
    "name": "BQ Prusa i3 Hephestos",
    "platform": "hephestos_platform.stl",
    "inherits": "fdmprinter.json",

    "machine_settings": {
		"machine_start_gcode": {
            "default": "; -- START GCODE --\n;Sliced at: {day} {date} {time}\n;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}\n;Print time: {print_time}\n;Filament used: {filament_amount}m {filament_weight}g\n;Filament cost: {filament_cost}\n;Uncomment to add your own temperature line\n;M109 S{print_temperature}\n;Uncomment to add your own bed temperature line\n;M190 S{print_bed_temperature}\nG21                     ;metric values\nG90                     ;absolute positioning\nM107                    ;start with the fan off\nG28 X0 Y0               ;move X/Y to min endstops\nG28 Z0                  ;move Z to min endstops\nG1 Z15.0 F1200          ;move the platform down 15mm\nG92 E0                  ;zero the extruded length\nG1 F200 E20             ;extrude 20mm of feed stock\nG92 E0                  ;zero the extruded length again\nG1 F7200 \n;Uncomment to put a printing message on LCD screen\n;M117 Printing...\n; -- end of START GCODE --"
        },
        "machine_end_gcode": {
            "default": "; -- END GCODE --\nM104 S0                     ;extruder heater off\nG91                         ;relative positioning\nG1 E-20 F300                ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z10 F1200    ;move Z up\nG90                         ;absolute positioning\nG1 X0 Y180 F1200  ;move Z up a bit and retract filament even more the way\nM84                         ;steppers off\n; -- end of END GCODE --"
        },
        "machine_width": {
            "default": 215
        },
        "machine_depth": {
            "default": 210
        },
        "machine_height": {
            "default": 180
        },
        "machine_heated_bed": {
            "default": false
        },
        "machine_center_is_zero": {
            "default": false
        },
        "machine_nozzle_offset_x_1": {
            "default": 18.0
        },
        "machine_nozzle_offset_y_1": {
            "default": 0.0
        },
        "machine_gcode_flavor": {
            "default": "RepRap (Marlin/Sprinter)"
        },
        "machine_disallowed_areas": {
            "default": [
            [[-115.0,  112.5], [ -82.0,  112.5], [ -84.0,  104.5], [-115.0,  104.5]],
            [[ 115.0,  112.5], [ 115.0,  104.5], [ 110.0,  104.5], [ 108.0,  112.5]],
            [[-115.0, -112.5], [-115.0, -104.5], [ -84.0, -104.5], [ -82.0, -112.5]],
            [[ 115.0, -112.5], [ 108.0, -112.5], [ 110.0, -104.5], [ 115.0, -104.5]]
        ]},
        "machine_platform_offset": {
            "default": [0.0, 100.0, 0.0]
        },
        "machine_nozzle_tip_outer_diameter": {
            "default": 0.4
        }
    },
    "categories": {
		"resolution": {
            "settings": {
                "layer_height": {
                    "default": 0.2
                },
                "layer_height_0": {
					"default": 0.2,
                    "visible": true
                },
				"shell_thickness": {
                    "default": 1.2,                    
                    "children": {
                        "wall_thickness": {
                            "default": 1.2,
                            "visible": false
                        },
                        "alternate_extra_perimeter": {
                            "default": false,
                            "visible": false
                        },
                        "top_bottom_thickness": {
                            "default": 0.8,
                            "visible": false,
                            "children": {
                                "top_thickness": {
                                    "default": 0.8,
                                    "visible": false,
                                    "children": {
                                        "top_layers": {
                                            "default": 8,
                                            "visible": false
                                        }
                                    }
                                },
                                "bottom_thickness": {
                                    "default": 0.4,
                                    "visible": false,
                                    "children": {
                                        "bottom_layers": {
                                            "default": 8,
                                            "visible": false
                                        }
                                    }
                                }
                            }
                        }
                    }
                }
            }
        },
        "material": {
            "settings": {
                "material_print_temperature": {
                    "default": 220,
                    "visible": true
                },
                "material_bed_temperature": {
                    "default": 0,
					"visible": false
                },
                "material_diameter": {
                    "default": 1.75,
                    "visible": true
                },
                "material_flow": {
                    "default": 100.0,
                    "visible": true
                },
				"retraction_enable": {
                    "default": true,
					"children": {
						"retraction_speed": {
							"default": 10.0,
							"visible": true,
							"children": {
								"retraction_retract_speed": {
									"default": 10.0,
									"visible": true
								},
								"retraction_prime_speed": {
									"default": 10.0,
									"visible": true
								}
							}	
						},
						"retraction_amount": {
                            "default": 1.0,
							"visible": true
                        },
						"retraction_minimal_extrusion": {
                            "default": 0.01,
							"visible": false
						},
						"retraction_hop": {
                            "default": 0.75,
							"visible": false
                        }
					}
				}	
            }
        },
		"speed": {
            "settings": {
                "speed_print": {
                    "default": 50.0,
                    "children": {
                        "speed_infill": {
                            "default": 50.0,
                            "visible": false
                        },
                        "speed_wall": {
                            "default":45.0,
                            "visible": false,
                            "children": {
                                "speed_wall_0": {
                                    "default": 45.0,
                                    "visible": false
                                },
                                "speed_wall_x": {
                                    "default": 45.0,
                                    "visible": false
                                }
                            }
                        },
                        "speed_topbottom": {
                            "default": 45.0,
                            "visible": false
                        },
                        "speed_support": {
                            "default": 45.0,
                            "visible": false
                        }
                    }
                },
                "speed_travel": {
                    "default": 120.0
                },
                "speed_layer_0": {
                    "default": 20.0,
                    "visible": false
                }
            }
        },
		"cooling": {
            "settings": {
                "cool_fan_full_at_height": {
                    "default": 1,
                    "visible": false
                }
            }
        },
		"support": {
            "settings": {
                "support_enable": {
                    "default": false
                },
                "support_type": {
                    "default": "Everywhere",
                    "visible": true
                },
                "support_z_distance": {
                    "default": 0.2,
                    "visible": false
                },
                "support_bottom_stair_step_height": {
                    "default": 1.0,
                    "visible": false
                },
                "support_join_distance": {
                    "default": 2.0,
                    "visible": false
                },
                "support_pattern": {
                    "default": "ZigZag",
                    "visible": true
                },
                "support_fill_rate": {
                    "default": 10,
                    "visible": false
                }
            }
        },
		"platform_adhesion": {
            "settings": {
                "skirt_minimal_length": {
                    "default": 150
                },
                "raft_line_spacing": {
                    "default": 1.0
                },
                "raft_base_linewidth": {
                    "default": 0.7
                },
                "raft_interface_thickness": {
                    "default": 0.2
                },
                "raft_interface_linewidth": {
                    "default": 0.2
                }
            }
        }
    }
}