{
    "source_version": "15.04",
    "target_version": 1,

    "translation": {
        "line_width": "nozzle_size",
        "layer_height": "layer_height",
        "layer_height_0": "bottom_thickness",
        "shell_thickness": "wall_thickness",
        "top_bottom_thickness": "solid_layer_thickness",
        "top_thickness": "0 if (solid_top == \"False\") else solid_layer_thickness",
        "bottom_thickness": "0 if (solid_bottom == \"False\") else solid_layer_thickness",
        "skin_no_small_gaps_heuristic": "fix_horrible_extensive_stitching",
        "infill_sparse_density": "fill_density",
        "infill_overlap": "fill_overlap",
        "infill_before_walls": "perimeter_before_infill",
        "material_print_temperature": "print_temperature",
        "material_bed_temperature": "print_bed_temperature",
        "material_diameter": "filament_diameter",
        "material_flow": "filament_flow",
        "retraction_enable": "retraction_enable",
        "retraction_amount": "retraction_amount",
        "retraction_speed": "retraction_speed",
        "retraction_min_travel": "retraction_min_travel",
        "retraction_hop": "retraction_hop",
        "speed_print": "print_speed",
        "speed_infill": "infill_speed if (infill_speed != 0) else print_speed",
        "speed_wall_0": "inset0_speed if (inset0_speed != 0) else print_speed",
        "speed_wall_x": "insetx_speed if (insetx_speed != 0) else print_speed",
        "speed_topbottom": "solidarea_speed if (solidarea_speed != 0) else print_speed",
        "speed_travel": "travel_speed if (travel_speed != 0) else travel_speed",
        "speed_layer_0": "bottom_layer_speed",
        "retraction_combing": "retraction_combing",
        "cool_fan_enabled": "fan_enabled",
        "cool_fan_speed_min": "fan_speed",
        "cool_fan_speed_max": "fan_speed_max",
        "cool_fan_full_at_height": "fan_full_height",
        "cool_min_layer_time": "cool_min_layer_time",
        "cool_min_speed": "cool_min_feedrate",
        "cool_lift_head": "cool_head_lift",
        "support_enable": "False if (support == \"None\") else True",
        "support_type": "\"buildplate\" if (support == \"Touching buildplate\") else \"everywhere\"",
        "support_angle": "support_angle",
        "support_xy_distance": "support_xy_distance",
        "support_z_distance": "support_z_distance",
        "support_pattern": "support_type.lower()",
        "support_infill_rate": "support_fill_rate",
        "adhesion_type": "\"skirt\" if (platform_adhesion == \"None\") else platform_adhesion.lower()",
        "skirt_line_count": "skirt_line_count",
        "skirt_gap": "skirt_gap",
        "skirt_minimal_length": "skirt_minimal_length",
        "brim_line_count": "brim_line_count",
        "raft_margin": "raft_margin",
        "raft_airgap": "raft_airgap_all",
        "raft_surface_layers": "raft_surface_layers",
        "raft_surface_thickness": "raft_surface_thickness",
        "raft_surface_line_width": "raft_surface_linewidth",
        "raft_surface_line_spacing": "raft_line_spacing",
        "raft_interface_thickness": "raft_interface_thickness",
        "raft_interface_line_width": "raft_interface_linewidth",
        "raft_interface_line_spacing": "raft_line_spacing",
        "raft_base_thickness": "raft_base_thickness",
        "raft_base_line_width": "raft_base_linewidth",
        "raft_base_line_spacing": "raft_line_spacing",
        "meshfix_union_all": "fix_horrible_union_all_type_a",
        "meshfix_union_all_remove_holes": "fix_horrible_union_all_type_b",
        "meshfix_extensive_stitching": "fix_horrible_extensive_stitching",
        "meshfix_keep_open_polygons": "fix_horrible_use_open_bits",
        "magic_mesh_surface_mode": "simple_mode",
        "magic_spiralize": "spiralize",
        "prime_tower_enable": "wipe_tower",
        "prime_tower_size": "math.sqrt(float(wipe_tower_volume) / float(layer_height))",
        "ooze_shield_enabled": "ooze_shield"
    }
}