mirror of
https://git.mirrors.martin98.com/https://github.com/Ultimaker/Cura
synced 2025-08-06 01:16:03 +08:00
27 lines
1.9 KiB
JSON
27 lines
1.9 KiB
JSON
{
|
|
"version": 2,
|
|
"name": "Anycubic Vyper",
|
|
"inherits": "fdmprinter",
|
|
"metadata":
|
|
{
|
|
"visible": true,
|
|
"author": "ThatGuyZim",
|
|
"manufacturer": "Anycubic",
|
|
"file_formats": "text/x-gcode",
|
|
"platform": "anycubic_vyper_platform.stl",
|
|
"machine_extruder_trains": { "0": "anycubic_vyper_extruder_0" }
|
|
},
|
|
"overrides":
|
|
{
|
|
"gantry_height": { "value": "0" },
|
|
"machine_center_is_zero": { "default_value": false },
|
|
"machine_depth": { "default_value": 255 },
|
|
"machine_end_gcode": { "default_value": "M104 S0 ; turn off extruder\nM140 S0 ; turn off bed\nM84 ; disable motors\nM107\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 ;X-20 Y-20 F{speed_travel} ;move Z up a bit and retract filament even more\nG28 X0 ;Y0 ;move X/Y to min endstops, so the head is out of the way\nG1 Y180 F2000\nM84 ;steppers off\nG90\nM300 S1318 P266" },
|
|
"machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
|
|
"machine_heated_bed": { "default_value": true },
|
|
"machine_height": { "default_value": 265 },
|
|
"machine_name": { "default_value": "Anycubic Vyper" },
|
|
"machine_start_gcode": { "default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nM300 S1318 P266\nG28 Z0 ;move Z to min endstops\nG0 Z0.2\nG92 E0 ;zero the extruded length\nG1 X40 E25 F400 ; Extrude 25mm of filament in a 4cm line. Reduce speed (F) if you have a nozzle smaller than 0.4mm!\nG92 E0 ;zero the extruded length again\nG1 E-1 F500 ; Retract a little\nG1 X80 F4000 ; Quickly wipe away from the filament line\nM117 ; Printing\u2026\nG5" },
|
|
"machine_width": { "default_value": 250 }
|
|
}
|
|
} |