mirror of
https://git.mirrors.martin98.com/https://github.com/Ultimaker/Cura
synced 2025-08-02 12:30:39 +08:00
52 lines
2.7 KiB
JSON
52 lines
2.7 KiB
JSON
{
|
|
"version": 2,
|
|
"name": "Makeit Pro-L",
|
|
"inherits": "fdmprinter",
|
|
"metadata":
|
|
{
|
|
"visible": true,
|
|
"author": "unknown",
|
|
"manufacturer": "Makeit 3D",
|
|
"file_formats": "text/x-gcode",
|
|
"has_materials": false,
|
|
"machine_extruder_trains":
|
|
{
|
|
"0": "makeit_l_dual_1st",
|
|
"1": "makeit_l_dual_2nd"
|
|
}
|
|
},
|
|
"overrides":
|
|
{
|
|
"adhesion_type": { "default_value": "skirt" },
|
|
"cool_min_layer_time_fan_speed_max": { "default_value": 5 },
|
|
"gantry_height": { "value": "330" },
|
|
"infill_sparse_density": { "default_value": 20 },
|
|
"layer_height": { "default_value": 0.2 },
|
|
"machine_center_is_zero": { "default_value": false },
|
|
"machine_depth": { "default_value": 254 },
|
|
"machine_end_gcode": { "default_value": "M104 T0 S0 ;1st extruder heater off\nM104 T1 S0 ;2nd extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-5 F9000 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+5 X+20 Y+20 F9000 ;move Z up a bit\nM117 MAKEiT Pro@Done\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning\nM81" },
|
|
"machine_extruder_count": { "default_value": 2 },
|
|
"machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
|
|
"machine_head_with_fans_polygon":
|
|
{
|
|
"default_value": [
|
|
[-305, 28],
|
|
[-305, -28],
|
|
[305, 28],
|
|
[305, -28]
|
|
]
|
|
},
|
|
"machine_heat_zone_length": { "default_value": 20 },
|
|
"machine_heated_bed": { "default_value": true },
|
|
"machine_height": { "default_value": 330 },
|
|
"machine_name": { "default_value": "MAKEiT Pro-L" },
|
|
"machine_start_gcode": { "default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nG92 E0 ;zero the extruded length\nG28 ;home\nG1 F200 E30 ;extrude 30 mm of feed stock\nG92 E0 ;zero the extruded length\nG1 E-5 ;retract 5 mm\nG28 SC ;Do homeing, clean nozzles and let printer to know that printing started\nG92 X-6 ;Sets Curas checker board to match printers heated bed coordinates\nG1 F{speed_travel}\nM117 Printing..." },
|
|
"machine_use_extruder_offset_to_offset_coords": { "default_value": true },
|
|
"machine_width": { "default_value": 305 },
|
|
"print_sequence": { "enabled": true },
|
|
"retraction_amount": { "default_value": 6 },
|
|
"retraction_speed": { "default_value": 180 },
|
|
"speed_print": { "default_value": 60 },
|
|
"wall_thickness": { "value": "1.2" }
|
|
}
|
|
} |