Frederic Meeuwissen 09c49126a8 [PP-593] Mark Nylon CF Slide as experimental on CC 0.4 cores

2025-03-17 16:42:54 +01:00

..

um_s3_aa0.4_abs_0.1mm_engineering.inst.cfg

Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10).

2025-02-26 10:57:55 +01:00

um_s3_aa0.4_abs_0.1mm_visual.inst.cfg

Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10).

2025-02-26 10:57:55 +01:00

um_s3_aa0.4_abs_0.2mm_quick.inst.cfg

Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10).

2025-02-26 10:57:55 +01:00

um_s3_aa0.4_abs_0.06mm_visual.inst.cfg

Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10).

2025-02-26 10:57:55 +01:00

um_s3_aa0.4_abs_0.15mm_engineering.inst.cfg

Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10).

2025-02-26 10:57:55 +01:00

um_s3_aa0.4_abs_0.15mm_visual.inst.cfg

Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10).

2025-02-26 10:57:55 +01:00

um_s3_aa0.4_cpe_0.1mm_engineering.inst.cfg

Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10).

2025-02-26 10:57:55 +01:00

um_s3_aa0.4_cpe_0.15mm_engineering.inst.cfg

Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10).

2025-02-26 10:57:55 +01:00

um_s3_aa0.4_cpe-plus_0.1mm_engineering.inst.cfg

Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10).

2025-02-26 10:57:55 +01:00

um_s3_aa0.4_cpe-plus_0.15mm_engineering.inst.cfg

Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10).

2025-02-26 10:57:55 +01:00

um_s3_aa0.4_nylon_0.1mm_engineering.inst.cfg

Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10).

2025-02-26 10:57:55 +01:00

um_s3_aa0.4_nylon_0.15mm_engineering.inst.cfg

Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10).

2025-02-26 10:57:55 +01:00

um_s3_aa0.4_pc_0.1mm_engineering.inst.cfg

Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10).

2025-02-26 10:57:55 +01:00

um_s3_aa0.4_pc_0.15mm_engineering.inst.cfg

Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10).

2025-02-26 10:57:55 +01:00

um_s3_aa0.4_petg_0.1mm_engineering.inst.cfg

Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10).

2025-02-26 10:57:55 +01:00

um_s3_aa0.4_petg_0.15mm_engineering.inst.cfg

Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10).

2025-02-26 10:57:55 +01:00

um_s3_aa0.4_pla_0.1mm_engineering.inst.cfg

Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10).

2025-02-26 10:57:55 +01:00

um_s3_aa0.4_pla_0.1mm_visual.inst.cfg

Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10).

2025-02-26 10:57:55 +01:00

um_s3_aa0.4_pla_0.2mm_quick.inst.cfg

Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10).

2025-02-26 10:57:55 +01:00

um_s3_aa0.4_pla_0.3mm_quick.inst.cfg

Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10).

2025-02-26 10:57:55 +01:00

um_s3_aa0.4_pla_0.06mm_visual.inst.cfg

Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10).

2025-02-26 10:57:55 +01:00

um_s3_aa0.4_pla_0.15mm_engineering.inst.cfg

Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10).

2025-02-26 10:57:55 +01:00

um_s3_aa0.4_pla_0.15mm_visual.inst.cfg

Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10).

2025-02-26 10:57:55 +01:00

um_s3_aa0.4_tough-pla_0.1mm_engineering.inst.cfg

Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10).

2025-02-26 10:57:55 +01:00

um_s3_aa0.4_tough-pla_0.1mm_visual.inst.cfg

Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10).

2025-02-26 10:57:55 +01:00

um_s3_aa0.4_tough-pla_0.2mm_quick.inst.cfg

Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10).

2025-02-26 10:57:55 +01:00

um_s3_aa0.4_tough-pla_0.3mm_quick.inst.cfg

Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10).

2025-02-26 10:57:55 +01:00

um_s3_aa0.4_tough-pla_0.06mm_visual.inst.cfg

Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10).

2025-02-26 10:57:55 +01:00

um_s3_aa0.4_tough-pla_0.15mm_engineering.inst.cfg

Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10).

2025-02-26 10:57:55 +01:00

um_s3_aa0.4_tough-pla_0.15mm_visual.inst.cfg

Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10).

2025-02-26 10:57:55 +01:00

um_s3_aa0.4_um-abs_0.1mm_engineering.inst.cfg

Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10).

2025-02-26 10:57:55 +01:00

um_s3_aa0.4_um-abs_0.1mm_visual.inst.cfg

Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10).

2025-02-26 10:57:55 +01:00

um_s3_aa0.4_um-abs_0.2mm_engineering.inst.cfg

Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10).

2025-02-26 10:57:55 +01:00

um_s3_aa0.4_um-abs_0.2mm_quick.inst.cfg

Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10).

2025-02-26 10:57:55 +01:00

um_s3_aa0.4_um-abs_0.2mm_visual.inst.cfg

Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10).

2025-02-26 10:57:55 +01:00

um_s3_aa0.4_um-abs_0.3mm_quick.inst.cfg

Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10).

2025-02-26 10:57:55 +01:00

um_s3_aa0.4_um-abs_0.06mm_visual.inst.cfg

Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10).

2025-02-26 10:57:55 +01:00

um_s3_aa0.4_um-abs_0.15mm_engineering.inst.cfg

Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10).

2025-02-26 10:57:55 +01:00

um_s3_aa0.4_um-abs_0.15mm_visual.inst.cfg

Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10).

2025-02-26 10:57:55 +01:00

um_s3_aa0.4_um-petg_0.1mm_engineering.inst.cfg

Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10).

2025-02-26 10:57:55 +01:00

um_s3_aa0.4_um-petg_0.1mm_visual.inst.cfg

Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10).

2025-02-26 10:57:55 +01:00

um_s3_aa0.4_um-petg_0.2mm_engineering.inst.cfg

Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10).

2025-02-26 10:57:55 +01:00

um_s3_aa0.4_um-petg_0.2mm_quick.inst.cfg

Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10).

2025-02-26 10:57:55 +01:00

um_s3_aa0.4_um-petg_0.2mm_visual.inst.cfg

Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10).

2025-02-26 10:57:55 +01:00

um_s3_aa0.4_um-petg_0.3mm_quick.inst.cfg

Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10).

2025-02-26 10:57:55 +01:00

um_s3_aa0.4_um-petg_0.06mm_visual.inst.cfg

Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10).

2025-02-26 10:57:55 +01:00

um_s3_aa0.4_um-petg_0.15mm_engineering.inst.cfg

Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10).

2025-02-26 10:57:55 +01:00

um_s3_aa0.4_um-petg_0.15mm_visual.inst.cfg

Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10).

2025-02-26 10:57:55 +01:00

um_s3_aa0.4_um-pla_0.1mm_engineering.inst.cfg

Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10).

2025-02-26 10:57:55 +01:00

um_s3_aa0.4_um-pla_0.1mm_visual.inst.cfg

Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10).

2025-02-26 10:57:55 +01:00

um_s3_aa0.4_um-pla_0.2mm_engineering.inst.cfg

Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10).

2025-02-26 10:57:55 +01:00

um_s3_aa0.4_um-pla_0.2mm_quick.inst.cfg

Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10).

2025-02-26 10:57:55 +01:00

um_s3_aa0.4_um-pla_0.2mm_visual.inst.cfg

Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10).

2025-02-26 10:57:55 +01:00

um_s3_aa0.4_um-pla_0.3mm_quick.inst.cfg

Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10).

2025-02-26 10:57:55 +01:00

um_s3_aa0.4_um-pla_0.06mm_visual.inst.cfg

Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10).

2025-02-26 10:57:55 +01:00

um_s3_aa0.4_um-pla_0.15mm_engineering.inst.cfg

Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10).

2025-02-26 10:57:55 +01:00

um_s3_aa0.4_um-pla_0.15mm_visual.inst.cfg

Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10).

2025-02-26 10:57:55 +01:00

um_s3_aa0.4_um-tough-pla_0.1mm_engineering.inst.cfg

Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10).

2025-02-26 10:57:55 +01:00

um_s3_aa0.4_um-tough-pla_0.1mm_visual.inst.cfg

Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10).

2025-02-26 10:57:55 +01:00

um_s3_aa0.4_um-tough-pla_0.2mm_engineering.inst.cfg

Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10).

2025-02-26 10:57:55 +01:00

um_s3_aa0.4_um-tough-pla_0.2mm_quick.inst.cfg

Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10).

2025-02-26 10:57:55 +01:00

um_s3_aa0.4_um-tough-pla_0.2mm_visual.inst.cfg

Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10).

2025-02-26 10:57:55 +01:00

um_s3_aa0.4_um-tough-pla_0.3mm_quick.inst.cfg

Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10).

2025-02-26 10:57:55 +01:00

um_s3_aa0.4_um-tough-pla_0.06mm_visual.inst.cfg

Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10).

2025-02-26 10:57:55 +01:00

um_s3_aa0.4_um-tough-pla_0.15mm_engineering.inst.cfg

Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10).

2025-02-26 10:57:55 +01:00

um_s3_aa0.4_um-tough-pla_0.15mm_visual.inst.cfg

Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10).

2025-02-26 10:57:55 +01:00

um_s3_aa0.8_um-abs_0.2mm_engineering.inst.cfg

Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10).

2025-02-26 10:57:55 +01:00

um_s3_aa0.8_um-abs_0.2mm_quick.inst.cfg

Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10).

2025-02-26 10:57:55 +01:00

um_s3_aa0.8_um-abs_0.2mm_visual.inst.cfg

Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10).

2025-02-26 10:57:55 +01:00

um_s3_aa0.8_um-abs_0.3mm_quick.inst.cfg

Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10).

2025-02-26 10:57:55 +01:00

um_s3_aa0.8_um-abs_0.4mm_quick.inst.cfg

Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10).

2025-02-26 10:57:55 +01:00

um_s3_aa0.8_um-petg_0.2mm_engineering.inst.cfg

Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10).

2025-02-26 10:57:55 +01:00

um_s3_aa0.8_um-petg_0.2mm_quick.inst.cfg

Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10).

2025-02-26 10:57:55 +01:00

um_s3_aa0.8_um-petg_0.2mm_visual.inst.cfg

Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10).

2025-02-26 10:57:55 +01:00

um_s3_aa0.8_um-petg_0.3mm_quick.inst.cfg

Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10).

2025-02-26 10:57:55 +01:00

um_s3_aa0.8_um-petg_0.4mm_quick.inst.cfg

Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10).

2025-02-26 10:57:55 +01:00

um_s3_aa0.8_um-pla_0.2mm_engineering.inst.cfg

Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10).

2025-02-26 10:57:55 +01:00

um_s3_aa0.8_um-pla_0.2mm_quick.inst.cfg

Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10).

2025-02-26 10:57:55 +01:00

um_s3_aa0.8_um-pla_0.2mm_visual.inst.cfg

Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10).

2025-02-26 10:57:55 +01:00

um_s3_aa0.8_um-pla_0.3mm_quick.inst.cfg

Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10).

2025-02-26 10:57:55 +01:00

um_s3_aa0.8_um-pla_0.4mm_quick.inst.cfg

Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10).

2025-02-26 10:57:55 +01:00

um_s3_aa0.8_um-tough-pla_0.2mm_engineering.inst.cfg

Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10).

2025-02-26 10:57:55 +01:00

um_s3_aa0.8_um-tough-pla_0.2mm_quick.inst.cfg

Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10).

2025-02-26 10:57:55 +01:00

um_s3_aa0.8_um-tough-pla_0.2mm_visual.inst.cfg

Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10).

2025-02-26 10:57:55 +01:00

um_s3_aa0.8_um-tough-pla_0.3mm_quick.inst.cfg

Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10).

2025-02-26 10:57:55 +01:00

um_s3_aa0.8_um-tough-pla_0.4mm_quick.inst.cfg

Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10).

2025-02-26 10:57:55 +01:00

um_s3_cc0.4_nylon-cf-slide_0.2mm_engineering.inst.cfg

[PP-593] Mark Nylon CF Slide as experimental on CC 0.4 cores

2025-03-17 16:42:54 +01:00

um_s3_cc0.4_petcf_0.2mm_annealing.inst.cfg

Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10).

2025-02-26 10:57:55 +01:00

um_s3_cc0.4_petcf_0.2mm_engineering.inst.cfg

Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10).

2025-02-26 10:57:55 +01:00

um_s3_cc0.4_petcf_0.15mm_annealing.inst.cfg

Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10).

2025-02-26 10:57:55 +01:00

um_s3_cc0.4_petcf_0.15mm_engineering.inst.cfg

Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10).

2025-02-26 10:57:55 +01:00

um_s3_cc0.6_nylon-cf-slide_0.2mm_engineering.inst.cfg

Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10).

2025-02-26 10:57:55 +01:00

um_s3_cc0.6_petcf_0.2mm_annealing.inst.cfg

Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10).

2025-02-26 10:57:55 +01:00

um_s3_cc0.6_petcf_0.2mm_engineering.inst.cfg

Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10).

2025-02-26 10:57:55 +01:00

um_s3_cc0.6_petcf_0.15mm_annealing.inst.cfg

Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10).

2025-02-26 10:57:55 +01:00

um_s3_cc0.6_petcf_0.15mm_engineering.inst.cfg

Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10).

2025-02-26 10:57:55 +01:00