mirror of
https://git.mirrors.martin98.com/https://github.com/Ultimaker/Cura
synced 2025-08-06 03:46:04 +08:00
47 lines
2.5 KiB
JSON
47 lines
2.5 KiB
JSON
{
|
|
"version": 2,
|
|
"name": "Robo 3D R1",
|
|
"inherits": "fdmprinter",
|
|
"metadata":
|
|
{
|
|
"visible": true,
|
|
"manufacturer": "Robo 3D",
|
|
"file_formats": "text/x-gcode",
|
|
"machine_extruder_trains": { "0": "robo_3d_r1_extruder_0" },
|
|
"platform_offset": [
|
|
0,
|
|
0,
|
|
0
|
|
]
|
|
},
|
|
"overrides":
|
|
{
|
|
"adhesion_type": { "default_value": "raft" },
|
|
"cool_min_layer_time": { "default_value": 7 },
|
|
"cool_min_speed": { "default_value": 19 },
|
|
"infill_sparse_density": { "default_value": 10 },
|
|
"layer_height": { "default_value": 0.2 },
|
|
"layer_height_0": { "default_value": 0.15 },
|
|
"machine_center_is_zero": { "default_value": false },
|
|
"machine_depth": { "default_value": 245 },
|
|
"machine_end_gcode": { "default_value": " M104 S0 ;extruder heater off\n M140 S0 ;heated bed heater off (if you have it)\n G91 ;relative positioning\n G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\n G1 Z+0.5 E-5 X-20 Y-20 F{speed_travel} ;move Z up a bit and retract filament even more\n G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\n M84 ;steppers off\n G90 ;absolute positioning\n" },
|
|
"machine_extruder_count": { "default_value": 1 },
|
|
"machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
|
|
"machine_heated_bed": { "default_value": true },
|
|
"machine_height": { "default_value": 210 },
|
|
"machine_name": { "default_value": "ROBO 3D R1" },
|
|
"machine_start_gcode": { "default_value": " G92 E0 ;\n M565 Z-1 ;\n G1 Z5 F5000 ;\n G29 ;\n" },
|
|
"machine_width": { "default_value": 225 },
|
|
"material_flow": { "default_value": 100 },
|
|
"prime_tower_size": { "default_value": 8.660254037844387 },
|
|
"raft_airgap": { "default_value": 0.2 },
|
|
"retraction_amount": { "default_value": 3 },
|
|
"retraction_combing": { "value": "'off'" },
|
|
"retraction_speed": { "default_value": 50 },
|
|
"speed_print": { "default_value": 40 },
|
|
"support_angle": { "default_value": 50 },
|
|
"support_enable": { "default_value": true },
|
|
"support_z_distance": { "default_value": 0.22 },
|
|
"wall_thickness": { "value": "1.2" }
|
|
}
|
|
} |