mirror of
https://git.mirrors.martin98.com/https://github.com/Ultimaker/Cura
synced 2025-06-29 18:35:10 +08:00
afb7a45bb0
It was changed to gantry_height long ago but not updated in these definitions. Contributes to issue CURA-1278.
103 lines
3.8 KiB
JSON
103 lines
3.8 KiB
JSON
{
|
|
"id": "rigidbot",
|
|
"version": 2,
|
|
"name": "RigidBot",
|
|
"inherits": "fdmprinter",
|
|
"metadata": {
|
|
"visible": true,
|
|
"author": "RBC",
|
|
"manufacturer": "RigidBot",
|
|
"category": "Other",
|
|
"file_formats": "text/x-gcode",
|
|
"platform": "rigidbot_platform.stl"
|
|
},
|
|
|
|
"overrides": {
|
|
"machine_width": {
|
|
"default_value": 254
|
|
},
|
|
"machine_depth": {
|
|
"default_value": 254
|
|
},
|
|
"machine_height": {
|
|
"default_value": 254
|
|
},
|
|
"machine_heated_bed": {
|
|
"default_value": true
|
|
},
|
|
"machine_nozzle_heat_up_speed": {
|
|
"default_value": 2
|
|
},
|
|
"machine_nozzle_cool_down_speed": {
|
|
"default_value": 2
|
|
},
|
|
"gantry_height": {
|
|
"default_value": 0
|
|
},
|
|
"machine_gcode_flavor": {
|
|
"default_value": "RepRap (Marlin/Sprinter)"
|
|
},
|
|
"machine_start_gcode": {
|
|
"default_value": ";Sliced at: {day} {date} {time}\n;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {infill_sparse_density}\n;Print time: {print_time}\n;Filament used: {filament_amount}m {filament_weight}g\n;Filament cost: {filament_cost}\n;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line\n;M109 S{print_temperature} ;Uncomment to add your own temperature line\nG21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nM205 X8 ;X/Y Jerk settings\nG1 Z15.0 F{travel_speed} ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E7 ;extrude 3mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F{travel_speed}\n;Put printing message on LCD screen\nM117 Rigibot Printing..."
|
|
},
|
|
"machine_end_gcode": {
|
|
"default_value": ";End GCode\nM104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+10 E-1 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nG1 Y230 F3000 ;move Y so the head is out of the way and Plate is moved forward\nM84 ;steppers off\nG90 ;absolute positioning\n;{profile_string}"
|
|
},
|
|
"layer_height": {
|
|
"default_value": 0.2
|
|
},
|
|
"wall_thickness": {
|
|
"default_value": 0.8
|
|
},
|
|
"top_bottom_thickness": {
|
|
"default_value": 0.3
|
|
},
|
|
"material_print_temperature": {
|
|
"default_value": 195
|
|
},
|
|
"material_bed_temperature": {
|
|
"default_value": 60
|
|
},
|
|
"material_diameter": {
|
|
"default_value": 1.75
|
|
},
|
|
"speed_print": {
|
|
"default_value": 60
|
|
},
|
|
"speed_infill": {
|
|
"default_value": 100
|
|
},
|
|
"speed_topbottom": {
|
|
"default_value": 15
|
|
},
|
|
"speed_travel": {
|
|
"default_value": 150
|
|
},
|
|
"speed_layer_0": {
|
|
"default_value": 15,
|
|
"minimum_value": "0.1"
|
|
},
|
|
"infill_overlap": {
|
|
"default_value": 10
|
|
},
|
|
"cool_fan_enabled": {
|
|
"default_value": false
|
|
},
|
|
"cool_fan_speed": {
|
|
"default_value": 0
|
|
},
|
|
"skirt_line_count": {
|
|
"default_value": 3,
|
|
"enabled": "adhesion_type == \"Skirt\""
|
|
},
|
|
"skirt_gap": {
|
|
"default_value": 4,
|
|
"enabled": "adhesion_type == \"Skirt\""
|
|
},
|
|
"skirt_minimal_length": {
|
|
"default_value": 200,
|
|
"enabled": "adhesion_type == \"Skirt\""
|
|
}
|
|
}
|
|
}
|