mirror of
https://git.mirrors.martin98.com/https://github.com/Ultimaker/Cura
synced 2025-06-29 22:45:30 +08:00
35fd58f721
These optimisations should only remove settings that are exactly equal to the parent profile. Support interface settings are an exception, since they were defining non-existing settings in the original profiles. The stand-by temperature is also an exception, since the stand-by temperature of the material profile is set in stone because of firmware. Contributes to issue CURA-3650.
67 lines
1.9 KiB
INI
67 lines
1.9 KiB
INI
[general]
|
|
version = 2
|
|
name = Draft Print
|
|
definition = ultimaker3
|
|
|
|
[metadata]
|
|
type = quality
|
|
quality_type = draft
|
|
material = generic_tpu_ultimaker3_AA_0.4
|
|
weight = -2
|
|
|
|
[values]
|
|
acceleration_enabled = True
|
|
acceleration_print = 4000
|
|
brim_width = 8.75
|
|
cool_fan_speed_max = 100
|
|
cool_min_layer_time_fan_speed_max = 6
|
|
cool_min_speed = 4
|
|
gradual_infill_step_height = =5 * layer_height
|
|
gradual_infill_steps = 4
|
|
infill_line_width = =round(line_width * 0.38 / 0.38, 2)
|
|
infill_overlap = 0
|
|
infill_pattern = tetrahedral
|
|
infill_sparse_density = 96
|
|
infill_wipe_dist = 0.1
|
|
jerk_enabled = True
|
|
jerk_print = 25
|
|
layer_height = 0.2
|
|
line_width = =machine_nozzle_size * 0.95
|
|
machine_min_cool_heat_time_window = 15
|
|
machine_nozzle_cool_down_speed = 0.85
|
|
machine_nozzle_heat_up_speed = 1.5
|
|
material_final_print_temperature = =material_print_temperature - 10
|
|
material_flow = 106
|
|
material_initial_print_temperature = =material_print_temperature - 5
|
|
material_print_temperature = =default_material_print_temperature + 2
|
|
material_print_temperature_layer_0 = =default_material_print_temperature + 2
|
|
material_standby_temperature = 100
|
|
multiple_mesh_overlap = 0
|
|
prime_tower_enable = True
|
|
prime_tower_size = 16
|
|
prime_tower_wipe_enabled = True
|
|
retraction_count_max = 12
|
|
retraction_extra_prime_amount = 0.8
|
|
retraction_extrusion_window = 1
|
|
retraction_hop = 2
|
|
retraction_hop_enabled = True
|
|
retraction_hop_only_when_collides = True
|
|
retraction_min_travel = 0.8
|
|
retraction_prime_speed = 15
|
|
speed_equalize_flow_enabled = True
|
|
speed_layer_0 = 18
|
|
speed_print = 25
|
|
speed_topbottom = =math.ceil(speed_print * 25 / 25)
|
|
speed_travel = 300
|
|
speed_wall = =math.ceil(speed_print * 25 / 25)
|
|
speed_wall_0 = =math.ceil(speed_wall * 25 / 25)
|
|
support_angle = 50
|
|
switch_extruder_prime_speed = 15
|
|
switch_extruder_retraction_amount = 20
|
|
switch_extruder_retraction_speeds = 35
|
|
top_bottom_thickness = 0.7
|
|
travel_avoid_distance = 3
|
|
wall_0_inset = 0
|
|
wall_line_width_x = =line_width
|
|
wall_thickness = 0.76
|