mirror of
https://git.mirrors.martin98.com/https://github.com/Ultimaker/Cura
synced 2025-06-30 02:55:32 +08:00
3e143a012a
Since the setting version 18 is used in the arachne beta build, we decided to make the the setting version to 19 in the normal releases, so that we make sure that projects made in arachne beta won't use any version upgrade scripts if a user attempts to open them in 4.12. CURA-8510
52 lines
1.8 KiB
INI
52 lines
1.8 KiB
INI
[general]
|
|
name = BB 0.4
|
|
version = 4
|
|
definition = ultimaker_s5
|
|
|
|
[metadata]
|
|
setting_version = 19
|
|
type = variant
|
|
hardware_type = nozzle
|
|
|
|
[values]
|
|
acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
|
|
acceleration_support_interface = =math.ceil(acceleration_support * 1500 / 2000)
|
|
acceleration_support_bottom = =math.ceil(acceleration_support_interface * 100 / 1500)
|
|
acceleration_prime_tower = =math.ceil(acceleration_print * 200 / 4000)
|
|
cool_fan_speed_max = =cool_fan_speed
|
|
gradual_support_infill_steps = 2
|
|
jerk_prime_tower = =math.ceil(jerk_print * 2 / 25)
|
|
jerk_support = =math.ceil(jerk_print * 15 / 25)
|
|
jerk_support_interface = =math.ceil(jerk_support * 10 / 15)
|
|
jerk_support_bottom = =math.ceil(jerk_support_interface * 1 / 10)
|
|
machine_nozzle_heat_up_speed = 1.5
|
|
machine_nozzle_id = BB 0.4
|
|
machine_nozzle_tip_outer_diameter = 1.0
|
|
raft_base_speed = 20
|
|
raft_interface_speed = 20
|
|
raft_speed = 25
|
|
retraction_amount = 4.5
|
|
retraction_count_max = 20
|
|
retraction_extrusion_window = =retraction_amount
|
|
retraction_min_travel = =3 * line_width
|
|
speed_layer_0 = 20
|
|
speed_prime_tower = =math.ceil(speed_print * 10 / 35)
|
|
speed_support = =math.ceil(speed_print * 25 / 35)
|
|
speed_support_interface = =math.ceil(speed_support * 20 / 25)
|
|
speed_support_bottom = =math.ceil(speed_support_interface * 10 / 20)
|
|
speed_wall_0 = =math.ceil(speed_wall * 25 / 30)
|
|
support_bottom_height = =layer_height * 2
|
|
support_bottom_pattern = zigzag
|
|
support_bottom_stair_step_height = 0
|
|
support_infill_rate = 50
|
|
support_infill_sparse_thickness = 0.2
|
|
support_interface_enable = True
|
|
support_interface_height = 0.6
|
|
support_interface_skip_height = =layer_height
|
|
support_join_distance = 3
|
|
support_line_width = =round(line_width * 0.4 / 0.35, 2)
|
|
support_offset = 3
|
|
support_xy_distance = =round(wall_line_width_0 * 0.75, 2)
|
|
support_xy_distance_overhang = =wall_line_width_0 / 2
|
|
switch_extruder_retraction_amount = 12
|