mirror of
https://git.mirrors.martin98.com/https://github.com/Ultimaker/Cura
synced 2025-06-29 22:05:10 +08:00
4a5673746c
These are overrides of default_value while there is a value defined. As such these overrides had no effect at all. Changing them to value can actually change the behaviour of the profile. That is not what the profile author has apparently tested with, so I'm not doing that. I'm just removing the unused data. In the future if we get new definitions the author gets notified of the error so that he may test more effectively. The legacy can't be fixed without re-testing, so I'm leaving that to the authors. Done during Turbo Testing & Tooling. I want to go home for the weekend now...
73 lines
2.8 KiB
JSON
73 lines
2.8 KiB
JSON
{
|
|
"name": "JGAurora JGMaker Magic",
|
|
"version": 2,
|
|
"inherits": "fdmprinter",
|
|
"metadata": {
|
|
"visible": true,
|
|
"author": "Samuel Pinches",
|
|
"manufacturer": "JGAurora",
|
|
"file_formats": "text/x-gcode",
|
|
"preferred_quality_type": "fast",
|
|
"machine_extruder_trains":
|
|
{
|
|
"0": "jgaurora_jgmaker_magic_extruder_0"
|
|
}
|
|
},
|
|
"overrides": {
|
|
"machine_name": {
|
|
"default_value": "JGAurora JGMaker Magic"
|
|
},
|
|
"machine_start_gcode": {
|
|
"default_value": "; -- START GCODE --\nG21 ;set units to millimetres\nG90 ;set to absolute positioning\nM106 S0 ;set fan speed to zero (turned off)\nG28 ;home all axis\nM420 S1 ;turn on mesh bed levelling if enabled in firmware\nG92 E0 ;zero the extruded length\nG1 Z1 F1000 ;move up slightly\nG1 X60.0 Z0 E9.0 F1000.0;intro line\nG1 X100.0 E21.5 F1000.0 ;continue line\nG92 E0 ;zero the extruded length again\n; -- end of START GCODE --"
|
|
},
|
|
"machine_end_gcode": {
|
|
"default_value": "; -- END GCODE --\nM104 S0 ;turn off nozzle heater\nM140 S0 ;turn off bed heater\nG91 ;set to relative positioning\nG1 E-10 F300 ;retract the filament slightly\nG90 ;set to absolute positioning\nG28 X0 ;move to the X-axis origin (Home)\nG0 Y280 F600 ;bring the bed to the front for easy print removal\nM84 ;turn off stepper motors\n; -- end of END GCODE --"
|
|
},
|
|
"machine_width": {
|
|
"default_value": 220
|
|
},
|
|
"machine_height": {
|
|
"default_value": 250
|
|
},
|
|
"machine_depth": {
|
|
"default_value": 220
|
|
},
|
|
"machine_heated_bed": {
|
|
"default_value": true
|
|
},
|
|
"machine_center_is_zero": {
|
|
"default_value": false
|
|
},
|
|
"gantry_height": {
|
|
"value": "10"
|
|
},
|
|
"machine_gcode_flavor": {
|
|
"default_value": "RepRap (Marlin/Sprinter)"
|
|
},
|
|
"material_diameter": {
|
|
"default_value": 1.75
|
|
},
|
|
"layer_height_0": {
|
|
"default_value": 0.2
|
|
},
|
|
"wall_thickness": {
|
|
"default_value": 1.2
|
|
},
|
|
"speed_print": {
|
|
"default_value": 60
|
|
},
|
|
"support_enable": {
|
|
"default_value": true
|
|
},
|
|
"retraction_enable": {
|
|
"default_value": true
|
|
},
|
|
"retraction_amount": {
|
|
"default_value": 5
|
|
},
|
|
"retraction_speed": {
|
|
"default_value": 50
|
|
}
|
|
}
|
|
}
|