Ghostkeeper 3845da24a1

Add new material properties for cleanly breaking off materials ...

When performing a long retract, the firmware can use these material properties to determine how fast and how far it needs to retract.
The retraction goes in two stages: Anti-ooze retraction stops oozing, and then the break retraction breaks off the filament from the bead in the nozzle.

Contributes to issue CURA-6329.

2019-05-23 15:53:00 +02:00

..

3dator.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

101Hero.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

abax_pri3.def.json

CURA-5334 remove material_diameter from all printer definitions and also from fdmprinter.def.json

2018-06-12 13:39:29 +02:00

abax_pri5.def.json

CURA-5334 remove material_diameter from all printer definitions and also from fdmprinter.def.json

2018-06-12 13:39:29 +02:00

abax_titan.def.json

CURA-5334 remove material_diameter from all printer definitions and also from fdmprinter.def.json

2018-06-12 13:39:29 +02:00

alfawise_u20.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

alfawise_u30.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

alya3dp.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

alyanx3dp.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

anet_a6.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:38:36 +02:00

anycubic_4max.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

anycubic_chiron.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

anycubic_i3_mega.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

bfb.def.json

CURA-5334 Remove machine nozzle size from machine definitions and move

2018-07-04 12:00:38 +02:00

bibo2_dual.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

bq_hephestos_2.def.json

bq Hephestos2: Getting a rid of custom g-code

2018-08-25 14:46:21 +02:00

bq_hephestos_xl.def.json

CURA-5334 remove material_diameter from all printer definitions and also from fdmprinter.def.json

2018-06-12 13:39:29 +02:00

bq_hephestos.def.json

Move hardcoded firmware-file table to definitions

2018-08-02 11:50:28 +02:00

bq_witbox_2.def.json

CURA-5334 remove material_diameter from all printer definitions and also from fdmprinter.def.json

2018-06-12 13:39:29 +02:00

bq_witbox.def.json

Move hardcoded firmware-file table to definitions

2018-08-02 11:50:28 +02:00

builder_premium_large.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

builder_premium_medium.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

builder_premium_small.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

cartesio.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

cocoon_create_modelmaker.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

creality_cr10.def.json

Reduce jerk for Creality printers

2019-05-20 14:30:29 +02:00

creality_cr10s4.def.json

Add extruder definition for all single-extrusion machines

2018-06-08 17:05:31 +02:00

creality_cr10s5.def.json

Add extruder definition for all single-extrusion machines

2018-06-08 17:05:31 +02:00

creality_cr10s.def.json

Add Creality CR-10S machine definition

2018-06-08 18:05:42 +02:00

creality_cr-x.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

creality_ender3.def.json

Merge branch '4.1'

2019-05-20 14:30:47 +02:00

creatable_d3.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

cubicon_3dp_110f.def.json

Add check for platform mesh & texture

2019-02-15 14:42:50 +01:00

cubicon_3dp_210f.def.json

Add check for platform mesh & texture

2019-02-15 14:42:50 +01:00

cubicon_3dp_310f.def.json

Add check for platform mesh & texture

2019-02-15 14:42:50 +01:00

cubicon_common.def.json

4904 cubicon device (#4963)

2019-01-22 16:44:04 +01:00

custom.def.json

Rename Custom FDM Printer to Custom FFF printer

2018-07-11 13:30:27 +02:00

dagoma_discoeasy200.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

dagoma_magis.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

dagoma_neva.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

delta_go.def.json

Add check for platform mesh & texture

2019-02-15 14:42:50 +01:00

deltabot.def.json

CURA-5334 Remove machine nozzle size from machine definitions and move

2018-07-04 12:00:38 +02:00

deltacomb.def.json

Deltacomb 3D - Updated profile

2019-03-07 17:06:49 +01:00

easyarts_ares.def.json

CURA-5334 Remove machine nozzle size from machine definitions and move

2018-07-04 12:00:38 +02:00

fabtotum.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

fdmextruder.def.json

Update setting_version to 7

2019-03-11 11:52:42 +01:00

fdmprinter.def.json

Add new material properties for cleanly breaking off materials

2019-05-23 15:53:00 +02:00

felixtec4dual.def.json

Fix indentation and remove spaces

2019-02-24 19:01:13 +01:00

flsun_qq.def.json

Merge branch 'master' of github.com:radfahrer/Cura

2019-02-26 07:25:42 -08:00

folgertech_FT-5.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

gmax15plus_dual.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

gmax15plus.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

grr_neo.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

helloBEEprusa.def.json

CURA-5334 remove material_diameter from all printer definitions and also from fdmprinter.def.json

2018-06-12 13:39:29 +02:00

hms434.def.json

Remove non-existent setting override

2019-05-14 09:06:26 +02:00

imade3d_jellybox.def.json

CURA-5334 Remove machine nozzle size from machine definitions and move

2018-07-04 12:00:38 +02:00

innovo_inventor.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

jgaurora_a1.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

jgaurora_a5.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

jgaurora_jgmaker_magic.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

jgaurora_z_603s.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

julia.def.json

CURA-5334 remove material_diameter from all printer definitions and also from fdmprinter.def.json

2018-06-12 13:39:29 +02:00

kemiq_q2_beta.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

kemiq_q2_gama.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

kossel_mini.def.json

Remove unused and incorrect "icon" metadata from definitions

2018-10-05 15:57:30 +02:00

kossel_pro.def.json

Remove unused and incorrect "icon" metadata from definitions

2018-10-05 15:57:30 +02:00

kupido.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

makeit_pro_l.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

makeit_pro_m.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

makeR_pegasus.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

makeR_prusa_tairona_i3.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

maker_starter.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

makerbotreplicator.def.json

Let Makerbot Replicator use Replicator's X3G variant

2018-10-15 01:30:36 +02:00

malyan_m180.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

malyan_m200.def.json

Fix z-fighting with build plate mesh

2018-07-24 09:09:54 +02:00

mankati_fullscale_xt_plus.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

Mark2_for_Ultimaker2.def.json

Fix Mark2 appearing at the bottom of machine list

2019-05-14 10:38:27 +02:00

mendel90.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

monoprice_select_mini_v1.def.json

Add extruder definition for all single-extrusion machines

2018-06-08 17:05:31 +02:00

monoprice_select_mini_v2.def.json

Fix start g-code of Monoprice Select Mini v2

2018-07-24 09:09:26 +02:00

monoprice_ultimate.def.json

Add Monoprice Ultimate based on Wanhao D6

2018-12-16 19:57:43 +00:00

nwa3d_a5.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

ord.def.json

CURA-5334 Remove machine nozzle size from machine definitions and move

2018-07-04 12:00:38 +02:00

peopoly_moai.def.json

Change setting value defaults for maximum resolution to use deviation

2019-04-16 11:36:07 +02:00

printrbot_play_heated.def.json

Add check for platform mesh & texture

2019-02-15 14:42:50 +01:00

printrbot_play.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

printrbot_simple_extended.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

printrbot_simple_makers_kit.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

printrbot_simple.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

prusa_i3_mk2.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

prusa_i3_xl.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

prusa_i3.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

punchtec_connect_xl.def.json

CURA-5334 remove material_diameter from all printer definitions and also from fdmprinter.def.json

2018-06-12 13:39:29 +02:00

raise3D_N2_dual.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

raise3D_N2_plus_dual.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

raise3D_N2_plus_single.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

raise3D_N2_single.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

renkforce_rf100.def.json

Set default infill density for tree support to 0% in profiles

2019-04-29 12:06:54 +02:00

rigid3d_3rdgen.def.json

CURA-5334 remove material_diameter from all printer definitions and also from fdmprinter.def.json

2018-06-12 13:39:29 +02:00

rigid3d_hobby.def.json

CURA-5334 remove material_diameter from all printer definitions and also from fdmprinter.def.json

2018-06-12 13:39:29 +02:00

rigid3d_mucit.def.json

CURA-5334 Remove machine nozzle size from machine definitions and move

2018-07-04 12:00:38 +02:00

rigid3d_zero2.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

rigid3d_zero.def.json

CURA-5334 remove material_diameter from all printer definitions and also from fdmprinter.def.json

2018-06-12 13:39:29 +02:00

rigid3d.def.json

CURA-5334 remove material_diameter from all printer definitions and also from fdmprinter.def.json

2018-06-12 13:39:29 +02:00

rigidbot_big.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

rigidbot.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

robo_3d_r1.def.json

CURA-5334 remove material_diameter from all printer definitions and also from fdmprinter.def.json

2018-06-12 13:39:29 +02:00

seemecnc_artemis.def.json

Remove unused and incorrect "icon" metadata from definitions

2018-10-05 15:57:30 +02:00

seemecnc_v32.def.json

Remove unused and incorrect "icon" metadata from definitions

2018-10-05 15:57:30 +02:00

stereotech_start.def.json

add START and STE320 profiles

2019-04-25 15:42:59 +04:00

stereotech_ste320.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:38:36 +02:00

structur3d_discov3ry1_complete_um2plus.def.json

Do not allow the use of "weight" for third party printers

2019-05-13 13:49:00 +02:00

tam.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

tevo_blackwidow.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

tevo_tarantula.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

tevo_tornado.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

tizyx_evy_dual.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

tizyx_evy.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

tizyx_k25.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

ubuild-3d_mr_bot_280.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

ultimaker2_extended_plus.def.json

Remove UpgradeFirmware as supported machine action...

2018-10-03 21:00:23 +02:00

ultimaker2_extended.def.json

Merge branch 'feature_add_printer_layout' of https://github.com/fieldOfView/Cura

2018-10-31 14:23:42 +01:00

ultimaker2_go.def.json

Merge branch 'feature_add_printer_layout' of https://github.com/fieldOfView/Cura

2018-10-31 14:23:42 +01:00

ultimaker2_plus.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

ultimaker2.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

ultimaker3_extended.def.json

Update the list of check urls for UM3 Extended

2019-03-25 11:59:28 +01:00

ultimaker3.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

ultimaker_original_dual.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

ultimaker_original_plus.def.json

WIP: Remove UMOCheckup MachineAction

2019-03-19 15:47:49 +01:00

ultimaker_original.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

ultimaker_s5.def.json

Reduce weight of S5 definition

2019-05-13 15:47:47 +02:00

ultimaker.def.json

Don't show Silicone for UM printers that are incompatible with it anyway

2019-03-05 15:36:31 +01:00

uni_print_3d.def.json

Added test for definition container

2018-11-23 17:01:05 +01:00

uniqbot_one.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

vertex_delta_k8800.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

vertex_k8400_dual.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

vertex_k8400.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

wanhao_d4s.def.json

Updated to reference speed_travel macro

2018-11-02 09:39:12 -04:00

wanhao_d6_plus.def.json

Updated to reference speed_travel macro

2018-11-02 09:39:12 -04:00

wanhao_d6.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

wanhao_d9.def.json

Replace travel_speed with speed_travel

2019-03-05 17:43:00 +01:00

wanhao_duplicator5S.def.json

Updated to reference speed_travel macro

2018-11-02 09:39:12 -04:00

wanhao_duplicator5Smini.def.json

Updated to reference speed_travel macro

2018-11-02 09:39:12 -04:00

wanhao_i3.def.json

Updated to reference speed_travel macro

2018-11-02 09:39:12 -04:00

wanhao_i3mini.def.json

Updated to reference speed_travel macro

2018-11-02 09:39:12 -04:00

wanhao_i3plus.def.json

Updated to reference speed_travel macro

2018-11-02 09:39:12 -04:00

winbo_dragonl4.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

winbo_mini2.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

winbo_superhelper105.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

winbo_superhelper155.def.json

Create winbo_superhelper155.def.json

2018-07-24 17:15:07 +08:00

z-bolt_classic.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

z-bolt_plus.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

zone3d_printer.def.json

CURA-5334 remove material_diameter from all printer definitions and also from fdmprinter.def.json

2018-06-12 13:39:29 +02:00

zyyx_agile.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00