mirror of
https://git.mirrors.martin98.com/https://github.com/Ultimaker/Cura
synced 2025-08-02 12:41:32 +08:00
7f04c326fb
Change the G28 O to a plain G28 for backward compatibility with firmware. Update Creality3s1 series startup gcode Removed the "G28 O ;Home all untrusted axes" Replaced with "G28 ; Home all axes" Some firmware will not accept the "O" parameter.
36 lines
2.0 KiB
JSON
36 lines
2.0 KiB
JSON
{
|
|
"version": 2,
|
|
"name": "Creality Ender-3 S1 Plus",
|
|
"inherits": "creality_base",
|
|
"metadata":
|
|
{
|
|
"visible": true,
|
|
"quality_definition": "creality_base"
|
|
},
|
|
"overrides":
|
|
{
|
|
"acceleration_enabled": { "value": true },
|
|
"acceleration_travel": { "value": 2000 },
|
|
"gantry_height": { "value": 25 },
|
|
"machine_depth": { "default_value": 300 },
|
|
"machine_head_with_fans_polygon":
|
|
{
|
|
"default_value": [
|
|
[-26, 34],
|
|
[-26, -32],
|
|
[32, -32],
|
|
[32, 34]
|
|
]
|
|
},
|
|
"machine_height": { "default_value": 300 },
|
|
"machine_name": { "default_value": "Creality Ender-3 S1 Plus" },
|
|
"machine_start_gcode": { "default_value": "; Ender 3 S1 Plus Start G-code\n; M413 S0 ; Disable power loss recovery\nG92 E0 ; Reset Extruder\n\n; Prep surfaces before auto home for better accuracy\nM140 S{material_bed_temperature_layer_0}\nM104 S{material_print_temperature_layer_0}\n\nG28 ; Home all axes\nG1 Z10.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0 Y0\n\nM190 S{material_bed_temperature_layer_0}\nM109 S{material_print_temperature_layer_0}\n\nG1 X0.1 Y20 Z0.3 F5000.0 ; Move to start position\nG1 X0.1 Y200.0 Z0.3 F1500.0 E15 ; Draw the first line\nG1 X0.4 Y200.0 Z0.3 F5000.0 ; Move to side a little\nG1 X0.4 Y20 Z0.3 F1500.0 E30 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.3 F5000.0 ; Move over to prevent blob squish\n" },
|
|
"machine_width": { "default_value": 300 },
|
|
"retraction_amount": { "value": 0.8 },
|
|
"retraction_extrusion_window": { "value": 1.5 },
|
|
"retraction_speed": { "default_value": 40 },
|
|
"speed_layer_0": { "value": 25 },
|
|
"speed_print": { "value": 60 },
|
|
"speed_travel": { "value": "120.0 if speed_print < 60 else 250.0 if speed_print > 100 else speed_print * 2.5" }
|
|
}
|
|
} |