mirror of
https://git.mirrors.martin98.com/https://github.com/Ultimaker/Cura
synced 2025-08-02 12:30:39 +08:00
30 lines
1.9 KiB
JSON
30 lines
1.9 KiB
JSON
{
|
|
"version": 2,
|
|
"name": "EasyArts Ares",
|
|
"inherits": "fdmprinter",
|
|
"metadata":
|
|
{
|
|
"visible": true,
|
|
"author": "nliaudat",
|
|
"manufacturer": "EasyArts",
|
|
"file_formats": "text/x-gcode",
|
|
"machine_extruder_trains": { "0": "easyarts_ares_extruder_0" }
|
|
},
|
|
"overrides":
|
|
{
|
|
"layer_height": { "default_value": 0.2 },
|
|
"layer_height_0": { "default_value": 0.2 },
|
|
"machine_center_is_zero": { "default_value": true },
|
|
"machine_depth": { "default_value": 180 },
|
|
"machine_end_gcode": { "default_value": "; -- START GCODE --\nG28 ; Home all axes\nM104 S0 ;extruder heater off\n;M140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\n;M84 ;steppers off\nG90 ;absolute positioning\n; -- end of START GCODE --" },
|
|
"machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
|
|
"machine_heated_bed": { "default_value": false },
|
|
"machine_height": { "default_value": 200 },
|
|
"machine_start_gcode": { "default_value": "; -- START GCODE --\nG21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 \nG29 Z0.12 ;Auto-bedleveling with Z offset \nG92 E0 ;zero the extruded length \nG1 F2000 E3 ;extrude 3mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F{speed_travel}\nM117 Printing...\n; -- end of START GCODE --" },
|
|
"machine_width": { "default_value": 180 },
|
|
"speed_print": { "default_value": 75 },
|
|
"support_enable": { "default_value": true },
|
|
"top_bottom_thickness": { "default_value": 1 },
|
|
"wall_thickness": { "value": "1" }
|
|
}
|
|
} |