mirror of
https://git.mirrors.martin98.com/https://github.com/Ultimaker/Cura
synced 2025-08-02 12:41:32 +08:00
94 lines
4.2 KiB
JSON
94 lines
4.2 KiB
JSON
{
|
|
"version": 2,
|
|
"name": "Ultimaker Original Dual Extrusion",
|
|
"inherits": "ultimaker",
|
|
"metadata":
|
|
{
|
|
"visible": true,
|
|
"author": "Ultimaker",
|
|
"manufacturer": "Ultimaker B.V.",
|
|
"file_formats": "text/x-gcode",
|
|
"platform": "ultimaker_platform.3mf",
|
|
"exclude_materials": [
|
|
"generic_hips",
|
|
"generic_petg",
|
|
"generic_bam",
|
|
"ultimaker_bam",
|
|
"generic_pva",
|
|
"ultimaker_pva",
|
|
"generic_tough_pla",
|
|
"ultimaker_tough_pla_black",
|
|
"ultimaker_tough_pla_green",
|
|
"ultimaker_tough_pla_red",
|
|
"ultimaker_tough_pla_white",
|
|
"ultimaker_tough_pla_blue",
|
|
"ultimaker_tough_pla_gray",
|
|
"ultimaker_tough_pla_yellow",
|
|
"generic_cffcpe",
|
|
"generic_cffpa",
|
|
"generic_gffcpe",
|
|
"generic_gffpa",
|
|
"generic_petcf",
|
|
"structur3d_dap100silicone",
|
|
"ultimaker_petg_blue",
|
|
"ultimaker_petg_grey",
|
|
"ultimaker_petg_black",
|
|
"ultimaker_petg_green",
|
|
"ultimaker_petg_white",
|
|
"ultimaker_petg_orange",
|
|
"ultimaker_petg_silver",
|
|
"ultimaker_petg_yellow",
|
|
"ultimaker_petg_transparent",
|
|
"ultimaker_petg_red_translucent",
|
|
"ultimaker_petg_blue_translucent",
|
|
"ultimaker_petg_green_translucent",
|
|
"ultimaker_petg_yellow_fluorescent",
|
|
"ultimaker_petg_red",
|
|
"ultimaker_petcf_black",
|
|
"ultimaker_petcf_blue",
|
|
"ultimaker_petcf_gray"
|
|
],
|
|
"firmware_file": "MarlinUltimaker-{baudrate}-dual.hex",
|
|
"firmware_hbk_file": "MarlinUltimaker-HBK-{baudrate}-dual.hex",
|
|
"first_start_actions": [
|
|
"UMOUpgradeSelection",
|
|
"BedLevel"
|
|
],
|
|
"has_machine_quality": true,
|
|
"has_materials": true,
|
|
"machine_extruder_trains":
|
|
{
|
|
"0": "ultimaker_original_dual_1st",
|
|
"1": "ultimaker_original_dual_2nd"
|
|
},
|
|
"quality_definition": "ultimaker_original",
|
|
"supported_actions": [
|
|
"UMOUpgradeSelection",
|
|
"BedLevel"
|
|
],
|
|
"weight": 4
|
|
},
|
|
"overrides":
|
|
{
|
|
"gantry_height": { "value": "55" },
|
|
"machine_center_is_zero": { "default_value": false },
|
|
"machine_depth": { "default_value": 195 },
|
|
"machine_end_gcode": { "default_value": "M104 T0 S0 ;1st extruder heater off\nM104 T1 S0 ;2nd extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning" },
|
|
"machine_extruder_count": { "default_value": 2 },
|
|
"machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
|
|
"machine_head_with_fans_polygon":
|
|
{
|
|
"default_value": [
|
|
[-75, 35],
|
|
[-75, -18],
|
|
[18, 35],
|
|
[18, -18]
|
|
]
|
|
},
|
|
"machine_height": { "default_value": 200 },
|
|
"machine_name": { "default_value": "Ultimaker Original" },
|
|
"machine_start_gcode": { "default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG1 Z15.0 F9000 ;move the platform down 15mm\nT1 ;Switch to the 2nd extruder\nG92 E0 ;zero the extruded length\nG1 F200 E6 ;extrude 6 mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F200 E-{switch_extruder_retraction_amount}\nT0 ;Switch to the 1st extruder\nG92 E0 ;zero the extruded length\nG1 F200 E6 ;extrude 6 mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F9000\n;Put printing message on LCD screen\nM117 Printing..." },
|
|
"machine_use_extruder_offset_to_offset_coords": { "default_value": true },
|
|
"machine_width": { "default_value": 205 }
|
|
}
|
|
} |