Cura/resources/quality/ultimaker3/um3_aa0.8_PLA_Verydraft_Print.inst.cfg
Lipu Fei b6dd87081c Add upgrade script for 3.0 to 3.1
CURA-4451

- Add upgrade script for 3.0. to 3.1
- Upgrade old stack files so they will use "empty_quality" as the
  "Not Supported" quality profile.
- Increase SettingVersion to 4
2017-10-30 12:45:25 +01:00

37 lines
1.2 KiB
INI

[general]
version = 2
name = Extra Fast
definition = ultimaker3
[metadata]
type = quality
quality_type = verydraft
material = generic_pla_ultimaker3_AA_0.8
weight = -3
setting_version = 4
[values]
cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
cool_fan_speed_max = =100
cool_min_speed = 2
gradual_infill_step_height = =3 * layer_height
infill_line_width = =round(line_width * 0.535 / 0.75, 2)
infill_pattern = cubic
layer_height = 0.3
line_width = =machine_nozzle_size * 0.9375
machine_nozzle_cool_down_speed = 0.75
machine_nozzle_heat_up_speed = 1.6
material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
material_print_temperature = =default_material_print_temperature + 10
material_standby_temperature = 100
prime_tower_enable = True
support_angle = 70
support_line_width = =line_width * 0.75
support_pattern = ='triangles'
support_xy_distance = =wall_line_width_0 * 1.5
top_bottom_thickness = =layer_height * 4
wall_line_width = =round(line_width * 0.75 / 0.75, 2)
wall_line_width_x = =round(wall_line_width * 0.625 / 0.75, 2)
wall_thickness = =wall_line_width_0 + wall_line_width_x