mirror of
https://git.mirrors.martin98.com/https://github.com/Ultimaker/Cura
synced 2025-06-29 20:35:13 +08:00
cf922295db
A lot was changed in support. The short of it is that we now think towers should be on by default, but aren't _completely_ certain about it. It makes more sense to do make this change before the beta rather than just before stable, so we have a chance to revert should it prove disastrous.
87 lines
4.3 KiB
JSON
87 lines
4.3 KiB
JSON
{
|
|
"version": 2,
|
|
"name": "Modix Base Printer",
|
|
"inherits": "fdmprinter",
|
|
"metadata":
|
|
{
|
|
"author": "Modix",
|
|
"manufacturer": "Modix",
|
|
"file_formats": "text/x-gcode",
|
|
"has_variants": true,
|
|
"machine_extruder_trains":
|
|
{
|
|
"0": "modix_v4_extruder_0",
|
|
"1": "modix_v4_extruder_1"
|
|
},
|
|
"preferred_variant_name": "0.4 mm Nozzle",
|
|
"variants_name": "Nozzle Size"
|
|
},
|
|
"overrides":
|
|
{
|
|
"adhesion_type": { "default_value": "skirt" },
|
|
"cool_fan_full_at_height": { "value": "layer_height_0 + 2 * layer_height" },
|
|
"fill_outline_gaps": { "value": false },
|
|
"gantry_height": { "value": "90.0" },
|
|
"infill_before_walls": { "value": false },
|
|
"infill_overlap": { "value": 30.0 },
|
|
"infill_pattern": { "value": "'cubic'" },
|
|
"infill_sparse_density": { "value": "15" },
|
|
"layer_height_0": { "value": "round(machine_nozzle_size / 2, 1)" },
|
|
"line_width": { "value": "machine_nozzle_size * 1.05" },
|
|
"machine_end_gcode": { "default_value": "M83 ; extruder relative moves \nG1 E-5 F2700 ;retract a bit \nG10 P0 S0 R0 ; turn off extruder 0 \nM106 S0 ; turn off fans \nT-1 P0 ; deselect any tools \nG4 P1 ; dwell 1ms \nG91 ;relative positioning \nG1 Z2 F500 ; Move print head up 2mm \nG90 ; absolute positioning \nG1 X{move.axes[0].min+2} Y{move.axes[1].max-2} F6000 ; move to the back left \nM84 ; disable motors" },
|
|
"machine_gcode_flavor": { "default_value": "RepRap (RepRap)" },
|
|
"machine_head_with_fans_polygon":
|
|
{
|
|
"default_value": [
|
|
[-100, 30],
|
|
[-100, 65],
|
|
[30, -105],
|
|
[-31, -100]
|
|
]
|
|
},
|
|
"machine_name": { "default_value": "Modix Base Printer" },
|
|
"machine_start_gcode": { "default_value": "G28 ; home all axes" },
|
|
"material_diameter": { "default_value": 1.75 },
|
|
"material_final_print_temperature": { "value": "material_print_temperature" },
|
|
"material_initial_print_temperature": { "value": "material_print_temperature" },
|
|
"minimum_interface_area": { "value": 10 },
|
|
"minimum_support_area": { "value": 2 },
|
|
"optimize_wall_printing_order": { "value": "True" },
|
|
"retraction_amount": { "value": 1 },
|
|
"retraction_combing": { "value": "'off' if retraction_hop_enabled else 'infill'" },
|
|
"retraction_combing_max_distance": { "value": 5 },
|
|
"retraction_count_max": { "value": 50 },
|
|
"retraction_extrusion_window": { "value": 1 },
|
|
"retraction_hop": { "value": 2 },
|
|
"retraction_hop_enabled": { "value": "support_enable" },
|
|
"retraction_prime_speed": { "value": 40 },
|
|
"retraction_retract_speed": { "value": 40 },
|
|
"retraction_speed": { "default_value": 40 },
|
|
"skin_overlap": { "value": 10.0 },
|
|
"skirt_brim_minimal_length": { "default_value": 200 },
|
|
"skirt_gap": { "value": 5.0 },
|
|
"skirt_line_count": { "value": 3 },
|
|
"speed_layer_0": { "value": 20.0 },
|
|
"speed_prime_tower": { "value": "speed_topbottom" },
|
|
"speed_support": { "value": "speed_wall_0" },
|
|
"speed_support_interface": { "value": "speed_topbottom" },
|
|
"speed_travel": { "value": 250.0 },
|
|
"speed_wall_x": { "value": "speed_wall" },
|
|
"speed_z_hop": { "value": 5 },
|
|
"support_angle": { "value": 55 },
|
|
"support_brim_enable": { "value": true },
|
|
"support_brim_width": { "value": 5 },
|
|
"support_infill_rate": { "value": "0 if support_enable and support_structure == 'tree' else 15" },
|
|
"support_interface_density": { "value": 40 },
|
|
"support_interface_enable": { "value": true },
|
|
"support_interface_height": { "value": "layer_height * 3" },
|
|
"support_xy_distance": { "value": "wall_line_width_0 * 2" },
|
|
"support_xy_distance_overhang": { "value": "wall_line_width_0" },
|
|
"support_z_distance": { "value": "layer_height if layer_height >= 0.2 else layer_height * 2" },
|
|
"top_bottom_thickness": { "value": "layer_height_0 + layer_height * 3" },
|
|
"travel_avoid_supports": { "value": true },
|
|
"travel_retract_before_outer_wall": { "value": true },
|
|
"wall_thickness": { "value": "line_width * 2" },
|
|
"z_seam_corner": { "value": "z_seam_corner_weighted" }
|
|
}
|
|
} |