mirror of
https://git.mirrors.martin98.com/https://github.com/Ultimaker/Cura
synced 2025-06-29 18:35:10 +08:00
9088ab23f4
In the initial PR for PP-71 I only cleaned up material_final_print_temperatures, but now the material_initial_print_temperatures are also coming into play, so I cleaned those as well. From research for PP-123 I know this is a safe change. Due to this cleanup the cool_min_temperature can now always follow the ultimaker default settings.
47 lines
1.2 KiB
INI
47 lines
1.2 KiB
INI
[general]
|
|
definition = ultimaker3
|
|
name = Fast
|
|
version = 4
|
|
|
|
[metadata]
|
|
material = generic_pc
|
|
quality_type = draft
|
|
setting_version = 21
|
|
type = quality
|
|
variant = AA 0.4
|
|
weight = -2
|
|
|
|
[values]
|
|
adhesion_type = raft
|
|
brim_width = 20
|
|
infill_overlap = 0
|
|
infill_overlap_mm = =0 if infill_sparse_density > 80 else 0.05
|
|
infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
|
|
infill_wipe_dist = 0.1
|
|
layer_height = 0.2
|
|
machine_min_cool_heat_time_window = 15
|
|
machine_nozzle_cool_down_speed = 0.85
|
|
machine_nozzle_heat_up_speed = 1.5
|
|
material_print_temperature = =default_material_print_temperature + 10
|
|
multiple_mesh_overlap = 0
|
|
ooze_shield_angle = 40
|
|
prime_tower_enable = True
|
|
prime_tower_wipe_enabled = True
|
|
raft_airgap = 0.25
|
|
retraction_hop = 2
|
|
retraction_hop_only_when_collides = True
|
|
retraction_min_travel = 0.8
|
|
retraction_prime_speed = 15
|
|
skin_overlap = 30
|
|
speed_print = 50
|
|
speed_topbottom = =math.ceil(speed_print * 25 / 50)
|
|
speed_travel = 250
|
|
speed_wall = =math.ceil(speed_print * 40 / 50)
|
|
speed_wall_0 = =math.ceil(speed_wall * 25 / 40)
|
|
support_interface_density = 87.5
|
|
switch_extruder_prime_speed = 15
|
|
switch_extruder_retraction_amount = 20
|
|
switch_extruder_retraction_speeds = 35
|
|
wall_0_inset = 0
|
|
|