mirror of
https://git.mirrors.martin98.com/https://github.com/Ultimaker/Cura
synced 2025-06-29 22:45:30 +08:00
4b4f971222
This should make it a bit easier for others to create a new definition since there is less for them to 'have to know'. Previously they would be required to fill in as category Other, but now they can just leave the category out.
52 lines
3.4 KiB
JSON
52 lines
3.4 KiB
JSON
{
|
|
"id": "julia",
|
|
"name": "Julia",
|
|
"version": 2,
|
|
"inherits": "fdmprinter",
|
|
"metadata": {
|
|
"visible": true,
|
|
"author": "Ultimaker",
|
|
"manufacturer": "Fracktal",
|
|
"file_formats": "text/x-gcode",
|
|
"platform_offset": [ 0, 0, 0]
|
|
},
|
|
|
|
"overrides": {
|
|
"machine_start_gcode": {
|
|
"default_value": " ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {infill_sparse_density}\n ;metric values\n M107\n G28\n G29\n G90 ;absolute positioning\n G92 E0; reset extruder distance\n G1 Z5 F300 ;move nozzle up 5mm for safe homing\n G1 X0 Y0 Z0 F5000; move nozzle to home\n M300 S600P200\n M300 S800 P200\n M190 S{material_bed_temperature} ;Uncomment to add your own bed temperature line\n M109 S{material_print_temperature} ;Uncomment to add your own temperature line\n M82 ;set extruder to absolute mode\n M107 ;start with the fan off\n G1 Z15.0 F{speed_travel} ;move the platform down 15mm\n G92 E0 ;zero the extruded length\n G1 F200 E3 ;extrude 3mm of feed stock\n G92 E0 ;zero the extruded length again\n G1 F{speed_travel}\n ;Put printing message on LCD screen\n M117 Printing...\n"
|
|
},
|
|
"machine_end_gcode": {
|
|
"default_value": " M104 S0 ;extruder heater off\n M140 S0 ;heated bed heater off (if you have it)\n G91 ;relative positioning\n G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\n G1 Z+0.5 E-5 X-20 Y-20 F{speed_travel} ;move Z up a bit and retract filament even more\n G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\n M84 ;steppers off\n G90 ;absolute positioning\n"
|
|
},
|
|
"material_bed_temperature": { "default_value": 100 },
|
|
"layer_height": { "default_value": 0.2 },
|
|
"support_angle": { "default_value": 30 },
|
|
"infill_overlap": { "default_value": 30 },
|
|
"layer_height_0": { "default_value": 0.2 },
|
|
"speed_print": { "default_value": 80 },
|
|
"speed_wall_0": { "default_value": 30 },
|
|
"speed_travel": { "default_value": 150 },
|
|
"brim_line_count": { "default_value": 15 },
|
|
"skin_overlap": { "default_value": 30 },
|
|
"prime_tower_size": { "default_value": 8.660254037844387 },
|
|
"material_diameter": { "default_value": 1.75 },
|
|
"bottom_thickness": { "default_value": 0.8 },
|
|
"retraction_amount": { "default_value": 3 },
|
|
"speed_topbottom": { "default_value": 80 },
|
|
"material_print_temperature": { "default_value": 230 },
|
|
"support_pattern": { "default_value": "grid" },
|
|
"speed_infill": { "default_value": 80 },
|
|
"infill_sparse_density": { "default_value": 10 },
|
|
"top_thickness": { "default_value": 0.8 },
|
|
"machine_extruder_count": { "default_value": 1 },
|
|
"retraction_combing": { "default_value": "off" },
|
|
"machine_heated_bed": { "default_value": true },
|
|
"machine_center_is_zero": { "default_value": false },
|
|
"machine_height": { "default_value": 260 },
|
|
"machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
|
|
"machine_depth": { "default_value": 250 },
|
|
"machine_width": { "default_value": 210 },
|
|
"machine_name": { "default_value": "Julia V2" }
|
|
}
|
|
}
|