mirror of
https://git.mirrors.martin98.com/https://github.com/Ultimaker/Cura
synced 2025-08-02 03:20:38 +08:00
4a5673746c
These are overrides of default_value while there is a value defined. As such these overrides had no effect at all. Changing them to value can actually change the behaviour of the profile. That is not what the profile author has apparently tested with, so I'm not doing that. I'm just removing the unused data. In the future if we get new definitions the author gets notified of the error so that he may test more effectively. The legacy can't be fixed without re-testing, so I'm leaving that to the authors. Done during Turbo Testing & Tooling. I want to go home for the weekend now...
64 lines
2.6 KiB
JSON
64 lines
2.6 KiB
JSON
{
|
|
"name": "BQ Prusa i3 Hephestos",
|
|
"version": 2,
|
|
"inherits": "fdmprinter",
|
|
"metadata": {
|
|
"visible": true,
|
|
"author": "BQ",
|
|
"manufacturer": "BQ",
|
|
"file_formats": "text/x-gcode",
|
|
"platform": "bq_hephestos_platform.stl",
|
|
"platform_offset": [ 0, -82, 0],
|
|
"machine_extruder_trains":
|
|
{
|
|
"0": "bq_hephestos_extruder_0"
|
|
},
|
|
"firmware_file": "MarlinHephestos2.hex"
|
|
},
|
|
|
|
"overrides": {
|
|
"machine_name": { "default_value": "BQ Prusa i3 Hephestos" },
|
|
"machine_start_gcode": {
|
|
"default_value": "; -- START GCODE --\nG21 ;set units to millimetres\nG90 ;set to absolute positioning\nM106 S0 ;set fan speed to zero (turned off)\nG28 X0 Y0 ;move to the X/Y origin (Home)\nG28 Z0 ;move to the Z origin (Home)\nG1 Z15.0 F1200 ;move Z to position 15.0 mm\nG92 E0 ;zero the extruded length\nG1 E20 F200 ;extrude 20mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F7200 ;set feedrate to 120 mm/s\n; -- end of START GCODE --"
|
|
},
|
|
"machine_end_gcode": {
|
|
"default_value": "; -- END GCODE --\nM104 S0 ;set extruder temperature to zero (turned off)\nG91 ;set to relative positioning\nG1 E-20 F300 ;retract the filament a bit to release some of the pressure\nG1 Z10 ;move extruder up 10 mm\nG90 ;set to absolute positioning\nG1 X0 Y180 F1200 ;expose the platform\nM84 ;turn off steppers\n; -- end of END GCODE --"
|
|
},
|
|
"machine_width": {
|
|
"default_value": 215
|
|
},
|
|
"machine_depth": {
|
|
"default_value": 210
|
|
},
|
|
"machine_height": {
|
|
"default_value": 180
|
|
},
|
|
"machine_heated_bed": {
|
|
"default_value": false
|
|
},
|
|
"machine_center_is_zero": {
|
|
"default_value": false
|
|
},
|
|
"machine_gcode_flavor": {
|
|
"default_value": "RepRap (Marlin/Sprinter)"
|
|
},
|
|
"layer_height": {
|
|
"default_value": 0.2
|
|
},
|
|
"layer_height_0": {
|
|
"default_value": 0.2
|
|
},
|
|
"wall_thickness": {
|
|
"default_value": 1
|
|
},
|
|
"top_bottom_thickness": {
|
|
"default_value": 1
|
|
},
|
|
"speed_print": {
|
|
"default_value": 40
|
|
},
|
|
"support_enable": {
|
|
"default_value": true
|
|
}
|
|
}
|
|
} |