mirror of
https://git.mirrors.martin98.com/https://github.com/Ultimaker/Cura
synced 2025-08-02 03:20:38 +08:00
4a5673746c
These are overrides of default_value while there is a value defined. As such these overrides had no effect at all. Changing them to value can actually change the behaviour of the profile. That is not what the profile author has apparently tested with, so I'm not doing that. I'm just removing the unused data. In the future if we get new definitions the author gets notified of the error so that he may test more effectively. The legacy can't be fixed without re-testing, so I'm leaving that to the authors. Done during Turbo Testing & Tooling. I want to go home for the weekend now...
60 lines
2.2 KiB
JSON
60 lines
2.2 KiB
JSON
{
|
|
"name": "EasyArts Ares",
|
|
"version": 2,
|
|
"inherits": "fdmprinter",
|
|
"metadata": {
|
|
"visible": true,
|
|
"author": "nliaudat",
|
|
"manufacturer": "EasyArts",
|
|
"file_formats": "text/x-gcode",
|
|
"machine_extruder_trains":
|
|
{
|
|
"0": "easyarts_ares_extruder_0"
|
|
}
|
|
},
|
|
"overrides": {
|
|
"machine_start_gcode": {
|
|
"default_value": "; -- START GCODE --\nG21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 \nG29 Z0.12 ;Auto-bedleveling with Z offset \nG92 E0 ;zero the extruded length \nG1 F2000 E3 ;extrude 3mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F{speed_travel}\nM117 Printing...\n; -- end of START GCODE --"
|
|
},
|
|
"machine_end_gcode": {
|
|
"default_value": "; -- START GCODE --\nG28 ; Home all axes\nM104 S0 ;extruder heater off\n;M140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\n;M84 ;steppers off\nG90 ;absolute positioning\n; -- end of START GCODE --"
|
|
},
|
|
"machine_width": {
|
|
"default_value": 180
|
|
},
|
|
"machine_depth": {
|
|
"default_value": 180
|
|
},
|
|
"machine_height": {
|
|
"default_value": 200
|
|
},
|
|
"machine_heated_bed": {
|
|
"default_value": false
|
|
},
|
|
"machine_center_is_zero": {
|
|
"default_value": true
|
|
},
|
|
"machine_gcode_flavor": {
|
|
"default_value": "RepRap"
|
|
},
|
|
"layer_height": {
|
|
"default_value": 0.2
|
|
},
|
|
"layer_height_0": {
|
|
"default_value": 0.2
|
|
},
|
|
"wall_thickness": {
|
|
"default_value": 1
|
|
},
|
|
"top_bottom_thickness": {
|
|
"default_value": 1
|
|
},
|
|
"speed_print": {
|
|
"default_value": 75
|
|
},
|
|
"support_enable": {
|
|
"default_value": true
|
|
}
|
|
}
|
|
}
|