Cura/resources/i18n/fi_FI/cura.po

# Cura
# Copyright (C) 2022 UltiMaker.
# This file is distributed under the same license as the Cura package.
# Ultimaker <plugins@ultimaker.com>, 2022.
#
msgid ""
msgstr ""
"Project-Id-Version: Cura 5.1\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2023-06-02 11:57+0000\n"
"PO-Revision-Date: 2022-07-15 10:53+0200\n"
"Last-Translator: Bothof <info@bothof.nl>\n"
"Language-Team: Finnish\n"
"Language: fi_FI\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
"X-Generator: Poedit 3.1.1\n"

#: cura/API/Account.py:199
msgctxt "@info:title"
msgid "Login failed"
msgstr ""

#: cura/Arranging/ArrangeObjectsJob.py:25
msgctxt "@info:status"
msgid "Finding new location for objects"
msgstr "Uusien paikkojen etsiminen kappaleille"

#: cura/Arranging/ArrangeObjectsJob.py:29
msgctxt "@info:title"
msgid "Finding Location"
msgstr "Etsitään paikkaa"

#: cura/Arranging/ArrangeObjectsJob.py:42 cura/MultiplyObjectsJob.py:99
msgctxt "@info:status"
msgid "Unable to find a location within the build volume for all objects"
msgstr "Kaikille kappaleille ei löydy paikkaa tulostustilavuudessa"

#: cura/Arranging/ArrangeObjectsJob.py:43
msgctxt "@info:title"
msgid "Can't Find Location"
msgstr "Paikkaa ei löydy"

#: cura/Backups/Backup.py:115
msgctxt "@info:backup_failed"
msgid "Could not create archive from user data directory: {}"
msgstr ""

#: cura/Backups/Backup.py:122 cura/Backups/Backup.py:159
#: plugins/CuraDrive/src/DrivePluginExtension.py:118
#: plugins/CuraDrive/src/DrivePluginExtension.py:126
msgctxt "@info:title"
msgid "Backup"
msgstr ""

#: cura/Backups/Backup.py:134
msgctxt "@info:backup_failed"
msgid "Tried to restore a Cura backup without having proper data or meta data."
msgstr ""

#: cura/Backups/Backup.py:145
msgctxt "@info:backup_failed"
msgid "Tried to restore a Cura backup that is higher than the current version."
msgstr ""

#: cura/Backups/Backup.py:158
msgctxt "@info:backup_failed"
msgid "The following error occurred while trying to restore a Cura backup:"
msgstr ""

#: cura/BuildVolume.py:100
msgctxt "@info:status"
msgid "The build volume height has been reduced due to the value of the \"Print Sequence\" setting to prevent the gantry from colliding with printed models."
msgstr "Tulostustilavuuden korkeutta on vähennetty tulostusjärjestysasetuksen vuoksi, jotta koroke ei osuisi tulostettuihin malleihin."

#: cura/BuildVolume.py:103
msgctxt "@info:title"
msgid "Build Volume"
msgstr "Tulostustilavuus"

#: cura/CrashHandler.py:107
msgctxt "@title:window"
msgid "Cura can't start"
msgstr ""

#: cura/CrashHandler.py:113
msgctxt "@label crash message"
msgid ""
"<p><b>Oops, UltiMaker Cura has encountered something that doesn't seem right.</p></b>\n"
"                    <p>We encountered an unrecoverable error during start up. It was possibly caused by some incorrect configuration files. We suggest to backup and reset your configuration.</p>\n"
"                    <p>Backups can be found in the configuration folder.</p>\n"
"                    <p>Please send us this Crash Report to fix the problem.</p>\n"
"                "
msgstr ""

#: cura/CrashHandler.py:122
msgctxt "@action:button"
msgid "Send crash report to UltiMaker"
msgstr ""

#: cura/CrashHandler.py:125
msgctxt "@action:button"
msgid "Show detailed crash report"
msgstr ""

#: cura/CrashHandler.py:129
msgctxt "@action:button"
msgid "Show configuration folder"
msgstr ""

#: cura/CrashHandler.py:140
msgctxt "@action:button"
msgid "Backup and Reset Configuration"
msgstr ""

#: cura/CrashHandler.py:171
msgctxt "@title:window"
msgid "Crash Report"
msgstr "Kaatumisraportti"

#: cura/CrashHandler.py:190
msgctxt "@label crash message"
msgid ""
"<p><b>A fatal error has occurred in Cura. Please send us this Crash Report to fix the problem</p></b>\n"
"            <p>Please use the \"Send report\" button to post a bug report automatically to our servers</p>\n"
"        "
msgstr ""

#: cura/CrashHandler.py:198
msgctxt "@title:groupbox"
msgid "System information"
msgstr ""

#: cura/CrashHandler.py:207
msgctxt "@label unknown version of Cura"
msgid "Unknown"
msgstr ""

#: cura/CrashHandler.py:228
msgctxt "@label Cura version number"
msgid "Cura version"
msgstr ""

#: cura/CrashHandler.py:229
msgctxt "@label"
msgid "Cura language"
msgstr ""

#: cura/CrashHandler.py:230
msgctxt "@label"
msgid "OS language"
msgstr ""

#: cura/CrashHandler.py:231
msgctxt "@label Type of platform"
msgid "Platform"
msgstr ""

#: cura/CrashHandler.py:232
msgctxt "@label"
msgid "Qt version"
msgstr ""

#: cura/CrashHandler.py:233
msgctxt "@label"
msgid "PyQt version"
msgstr ""

#: cura/CrashHandler.py:234
msgctxt "@label OpenGL version"
msgid "OpenGL"
msgstr ""

#: cura/CrashHandler.py:264
msgctxt "@label"
msgid "Not yet initialized"
msgstr ""

#: cura/CrashHandler.py:267
#, python-brace-format
msgctxt "@label OpenGL version"
msgid "<li>OpenGL Version: {version}</li>"
msgstr ""

#: cura/CrashHandler.py:268
#, python-brace-format
msgctxt "@label OpenGL vendor"
msgid "<li>OpenGL Vendor: {vendor}</li>"
msgstr ""

#: cura/CrashHandler.py:269
#, python-brace-format
msgctxt "@label OpenGL renderer"
msgid "<li>OpenGL Renderer: {renderer}</li>"
msgstr ""

#: cura/CrashHandler.py:304
msgctxt "@title:groupbox"
msgid "Error traceback"
msgstr ""

#: cura/CrashHandler.py:390
msgctxt "@title:groupbox"
msgid "Logs"
msgstr ""

#: cura/CrashHandler.py:418
msgctxt "@action:button"
msgid "Send report"
msgstr ""

#: cura/CuraApplication.py:540
msgctxt "@info:progress"
msgid "Loading machines..."
msgstr "Ladataan laitteita..."

#: cura/CuraApplication.py:547
msgctxt "@info:progress"
msgid "Setting up preferences..."
msgstr ""

#: cura/CuraApplication.py:692
msgctxt "@info:progress"
msgid "Initializing Active Machine..."
msgstr ""

#: cura/CuraApplication.py:839
msgctxt "@info:progress"
msgid "Initializing machine manager..."
msgstr ""

#: cura/CuraApplication.py:853
msgctxt "@info:progress"
msgid "Initializing build volume..."
msgstr ""

#: cura/CuraApplication.py:921
msgctxt "@info:progress"
msgid "Setting up scene..."
msgstr "Asetetaan näkymää..."

#: cura/CuraApplication.py:957
msgctxt "@info:progress"
msgid "Loading interface..."
msgstr "Ladataan käyttöliittymää..."

#: cura/CuraApplication.py:962
msgctxt "@info:progress"
msgid "Initializing engine..."
msgstr ""

#: cura/CuraApplication.py:1290
#, python-format
msgctxt "@info 'width', 'depth' and 'height' are variable names that must NOT be translated; just translate the format of ##x##x## mm."
msgid "%(width).1f x %(depth).1f x %(height).1f mm"
msgstr "%(width).1f x %(depth).1f x %(height).1f mm"

#: cura/CuraApplication.py:1816
#, python-brace-format
msgctxt "@info:status"
msgid "Only one G-code file can be loaded at a time. Skipped importing {0}"
msgstr "Vain yksi G-code-tiedosto voidaan ladata kerralla. Tiedoston {0} tuonti ohitettiin."

#: cura/CuraApplication.py:1818 cura/OAuth2/AuthorizationService.py:217
#: plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:189
msgctxt "@info:title"
msgid "Warning"
msgstr "Varoitus"

#: cura/CuraApplication.py:1828
#, python-brace-format
msgctxt "@info:status"
msgid "Can't open any other file if G-code is loading. Skipped importing {0}"
msgstr "Muita tiedostoja ei voida ladata, kun G-code latautuu. Tiedoston {0} tuonti ohitettiin."

#: cura/CuraApplication.py:1830 cura/Settings/CuraContainerRegistry.py:156
#: cura/Settings/CuraContainerRegistry.py:166
#: plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
#: plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:173
msgctxt "@info:title"
msgid "Error"
msgstr "Virhe"

#: cura/Machines/Models/DiscoveredPrintersModel.py:83
msgctxt "@label"
msgid "Unknown"
msgstr "Tuntematon"

#: cura/Machines/Models/DiscoveredPrintersModel.py:113
msgctxt "@label"
msgid "The printer(s) below cannot be connected because they are part of a group"
msgstr ""

#: cura/Machines/Models/DiscoveredPrintersModel.py:115
msgctxt "@label"
msgid "Available networked printers"
msgstr ""

#: cura/Machines/Models/ExtrudersModel.py:219
msgctxt "@menuitem"
msgid "Not overridden"
msgstr ""

#: cura/Machines/Models/GlobalStacksModel.py:160
#: resources/qml/PrinterSelector/MachineSelectorList.qml:28
msgctxt "@label"
msgid "Connected printers"
msgstr ""

#: cura/Machines/Models/GlobalStacksModel.py:160
msgctxt "@label"
msgid "Preset printers"
msgstr ""

#: cura/Machines/Models/GlobalStacksModel.py:165
#, python-brace-format
msgctxt "@label {0} is the name of a printer that's about to be deleted."
msgid "Are you sure you wish to remove {0}? This cannot be undone!"
msgstr ""

#: cura/Machines/Models/IntentCategoryModel.py:42
#: cura/Machines/Models/IntentSelectionModel.py:61
#: cura/Machines/Models/IntentTranslations.py:11
#: cura/Machines/Models/QualityManagementModel.py:347
msgctxt "@label"
msgid "Default"
msgstr ""

#: cura/Machines/Models/IntentCategoryModel.py:45
#: cura/Machines/Models/IntentSelectionModel.py:65
#: cura/Machines/Models/IntentTranslations.py:14
msgctxt "@label"
msgid "Visual"
msgstr ""

#: cura/Machines/Models/IntentCategoryModel.py:46
#: cura/Machines/Models/IntentSelectionModel.py:66
#: cura/Machines/Models/IntentTranslations.py:15
msgctxt "@text"
msgid "The visual profile is designed to print visual prototypes and models with the intent of high visual and surface quality."
msgstr ""

#: cura/Machines/Models/IntentCategoryModel.py:49
#: cura/Machines/Models/IntentSelectionModel.py:70
#: cura/Machines/Models/IntentTranslations.py:18
msgctxt "@label"
msgid "Engineering"
msgstr ""

#: cura/Machines/Models/IntentCategoryModel.py:50
#: cura/Machines/Models/IntentSelectionModel.py:71
#: cura/Machines/Models/IntentTranslations.py:19
msgctxt "@text"
msgid "The engineering profile is designed to print functional prototypes and end-use parts with the intent of better accuracy and for closer tolerances."
msgstr ""

#: cura/Machines/Models/IntentCategoryModel.py:53
#: cura/Machines/Models/IntentSelectionModel.py:75
#: cura/Machines/Models/IntentTranslations.py:22
msgctxt "@label"
msgid "Draft"
msgstr ""

#: cura/Machines/Models/IntentCategoryModel.py:54
#: cura/Machines/Models/IntentSelectionModel.py:76
#: cura/Machines/Models/IntentTranslations.py:23
msgctxt "@text"
msgid "The draft profile is designed to print initial prototypes and concept validation with the intent of significant print time reduction."
msgstr ""

#: cura/Machines/Models/MaterialManagementModel.py:232
msgctxt "@label"
msgid "Custom Material"
msgstr "Mukautettu materiaali"

#: cura/Machines/Models/MaterialManagementModel.py:233
#: resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:340
msgctxt "@label"
msgid "Custom"
msgstr "Mukautettu"

#: cura/Machines/Models/QualityManagementModel.py:400
msgctxt "@label"
msgid "Custom profiles"
msgstr "Mukautetut profiilit"

#: cura/Machines/Models/QualityManagementModel.py:435
#, python-brace-format
msgctxt "@item:inlistbox"
msgid "All Supported Types ({0})"
msgstr ""

#: cura/Machines/Models/QualityManagementModel.py:436
msgctxt "@item:inlistbox"
msgid "All Files (*)"
msgstr ""

#: cura/Machines/Models/QualitySettingsModel.py:182
msgctxt "@info:status"
msgid "Calculated"
msgstr "Laskettu"

#: cura/MultiplyObjectsJob.py:30
msgctxt "@info:status"
msgid "Multiplying and placing objects"
msgstr "Kappaleiden kertominen ja sijoittelu"

#: cura/MultiplyObjectsJob.py:32
msgctxt "@info:title"
msgid "Placing Objects"
msgstr ""

#: cura/MultiplyObjectsJob.py:100
msgctxt "@info:title"
msgid "Placing Object"
msgstr "Sijoitetaan kappaletta"

#: cura/OAuth2/AuthorizationHelpers.py:89
msgctxt "@message"
msgid "Could not read response."
msgstr ""

#: cura/OAuth2/AuthorizationRequestHandler.py:77
msgctxt "@message"
msgid "The provided state is not correct."
msgstr ""

#: cura/OAuth2/AuthorizationRequestHandler.py:83
msgctxt "@message"
msgid "Timeout when authenticating with the account server."
msgstr ""

#: cura/OAuth2/AuthorizationRequestHandler.py:101
msgctxt "@message"
msgid "Please give the required permissions when authorizing this application."
msgstr ""

#: cura/OAuth2/AuthorizationRequestHandler.py:109
msgctxt "@message"
msgid "Something unexpected happened when trying to log in, please try again."
msgstr ""

#: cura/OAuth2/AuthorizationService.py:216
msgctxt "@info"
msgid "Unable to start a new sign in process. Check if another sign in attempt is still active."
msgstr ""

#: cura/OAuth2/AuthorizationService.py:277
msgctxt "@info"
msgid "Unable to reach the UltiMaker account server."
msgstr ""

#: cura/OAuth2/AuthorizationService.py:278
msgctxt "@info:title"
msgid "Log-in failed"
msgstr ""

#: cura/PrinterOutput/UploadMaterialsJob.py:104
msgctxt "@text:error"
msgid "Failed to create archive of materials to sync with printers."
msgstr ""

#: cura/PrinterOutput/UploadMaterialsJob.py:111
#: cura/PrinterOutput/UploadMaterialsJob.py:165
msgctxt "@text:error"
msgid "Failed to load the archive of materials to sync it with printers."
msgstr ""

#: cura/PrinterOutput/UploadMaterialsJob.py:143
msgctxt "@text:error"
msgid "The response from Digital Factory appears to be corrupted."
msgstr ""

#: cura/PrinterOutput/UploadMaterialsJob.py:147
#: cura/PrinterOutput/UploadMaterialsJob.py:151
#: cura/PrinterOutput/UploadMaterialsJob.py:155
msgctxt "@text:error"
msgid "The response from Digital Factory is missing important information."
msgstr ""

#: cura/PrinterOutput/UploadMaterialsJob.py:218
msgctxt "@text:error"
msgid "Failed to connect to Digital Factory to sync materials with some of the printers."
msgstr ""

#: cura/PrinterOutput/UploadMaterialsJob.py:232
msgctxt "@text:error"
msgid "Failed to connect to Digital Factory."
msgstr ""

#: cura/Settings/ActiveQuality.py:43
msgctxt "@label"
msgid "Experimental"
msgstr ""

#: cura/Settings/ContainerManager.py:207
#: cura/Settings/CuraContainerRegistry.py:140
msgctxt "@title:window"
msgid "File Already Exists"
msgstr "Tiedosto on jo olemassa"

#: cura/Settings/ContainerManager.py:208
#: cura/Settings/CuraContainerRegistry.py:141
#, python-brace-format
msgctxt "@label Don't translate the XML tag <filename>!"
msgid "The file <filename>{0}</filename> already exists. Are you sure you want to overwrite it?"
msgstr "Tiedosto <filename>{0}</filename> on jo olemassa. Haluatko varmasti kirjoittaa sen päälle?"

#: cura/Settings/ContainerManager.py:459 cura/Settings/ContainerManager.py:462
msgctxt "@info:status"
msgid "Invalid file URL:"
msgstr ""

#: cura/Settings/CuraContainerRegistry.py:153
#, python-brace-format
msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
msgid "Failed to export profile to <filename>{0}</filename>: <message>{1}</message>"
msgstr "Profiilin vienti epäonnistui tiedostoon <filename>{0}</filename>: <message>{1}</message>"

#: cura/Settings/CuraContainerRegistry.py:163
#, python-brace-format
msgctxt "@info:status Don't translate the XML tag <filename>!"
msgid "Failed to export profile to <filename>{0}</filename>: Writer plugin reported failure."
msgstr "Profiilin vienti epäonnistui tiedostoon <filename>{0}</filename>: Kirjoitin-lisäosa ilmoitti virheestä."

#: cura/Settings/CuraContainerRegistry.py:171
#, python-brace-format
msgctxt "@info:status Don't translate the XML tag <filename>!"
msgid "Exported profile to <filename>{0}</filename>"
msgstr "Profiili viety tiedostoon <filename>{0}</filename>"

#: cura/Settings/CuraContainerRegistry.py:173
msgctxt "@info:title"
msgid "Export succeeded"
msgstr ""

#: cura/Settings/CuraContainerRegistry.py:205
#, python-brace-format
msgctxt "@info:status Don't translate the XML tags <filename>!"
msgid "Failed to import profile from <filename>{0}</filename>: {1}"
msgstr ""

#: cura/Settings/CuraContainerRegistry.py:209
#, python-brace-format
msgctxt "@info:status Don't translate the XML tags <filename>!"
msgid "Can't import profile from <filename>{0}</filename> before a printer is added."
msgstr ""

#: cura/Settings/CuraContainerRegistry.py:224
#, python-brace-format
msgctxt "@info:status Don't translate the XML tags <filename>!"
msgid "No custom profile to import in file <filename>{0}</filename>"
msgstr ""

#: cura/Settings/CuraContainerRegistry.py:228
#, python-brace-format
msgctxt "@info:status Don't translate the XML tags <filename>!"
msgid "Failed to import profile from <filename>{0}</filename>:"
msgstr ""

#: cura/Settings/CuraContainerRegistry.py:252
#: cura/Settings/CuraContainerRegistry.py:262
#, python-brace-format
msgctxt "@info:status Don't translate the XML tags <filename>!"
msgid "This profile <filename>{0}</filename> contains incorrect data, could not import it."
msgstr ""

#: cura/Settings/CuraContainerRegistry.py:355
#, python-brace-format
msgctxt "@info:status Don't translate the XML tag <filename>!"
msgid "Failed to import profile from <filename>{0}</filename>:"
msgstr ""

#: cura/Settings/CuraContainerRegistry.py:359
#, python-brace-format
msgctxt "@info:status"
msgid "Successfully imported profile {0}."
msgstr ""

#: cura/Settings/CuraContainerRegistry.py:366
#, python-brace-format
msgctxt "@info:status"
msgid "File {0} does not contain any valid profile."
msgstr ""

#: cura/Settings/CuraContainerRegistry.py:369
#, python-brace-format
msgctxt "@info:status"
msgid "Profile {0} has an unknown file type or is corrupted."
msgstr "Profiililla {0} on tuntematon tiedostotyyppi tai se on vioittunut."

#: cura/Settings/CuraContainerRegistry.py:443
msgctxt "@label"
msgid "Custom profile"
msgstr "Mukautettu profiili"

#: cura/Settings/CuraContainerRegistry.py:459
msgctxt "@info:status"
msgid "Profile is missing a quality type."
msgstr "Profiilista puuttuu laatutyyppi."

#: cura/Settings/CuraContainerRegistry.py:463
msgctxt "@info:status"
msgid "There is no active printer yet."
msgstr ""

#: cura/Settings/CuraContainerRegistry.py:469
msgctxt "@info:status"
msgid "Unable to add the profile."
msgstr ""

#: cura/Settings/CuraContainerRegistry.py:483
#, python-brace-format
msgctxt "@info:status"
msgid "Quality type '{0}' is not compatible with the current active machine definition '{1}'."
msgstr ""

#: cura/Settings/CuraContainerRegistry.py:488
#, python-brace-format
msgctxt "@info:status"
msgid "Warning: The profile is not visible because its quality type '{0}' is not available for the current configuration. Switch to a material/nozzle combination that can use this quality type."
msgstr ""

#: cura/Settings/MachineManager.py:746
#: plugins/3MFReader/ThreeMFWorkspaceReader.py:221
msgctxt "@label"
msgid "Nozzle"
msgstr "Suutin"

#: cura/Settings/MachineManager.py:890
msgctxt "@info:message Followed by a list of settings."
msgid "Settings have been changed to match the current availability of extruders:"
msgstr ""

#: cura/Settings/MachineManager.py:891
msgctxt "@info:title"
msgid "Settings updated"
msgstr ""

#: cura/Settings/MachineManager.py:1514
msgctxt "@info:title"
msgid "Extruder(s) Disabled"
msgstr ""

#: cura/Settings/cura_empty_instance_containers.py:36
msgctxt "@info:not supported profile"
msgid "Not supported"
msgstr ""

#: cura/Settings/cura_empty_instance_containers.py:55
msgctxt "@info:No intent profile selected"
msgid "Default"
msgstr ""

#: cura/UI/AddPrinterPagesModel.py:17
#: plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:61
msgctxt "@action:button"
msgid "Add"
msgstr "Lisää"

#: cura/UI/AddPrinterPagesModel.py:26 cura/UI/WelcomePagesModel.py:290
msgctxt "@action:button"
msgid "Finish"
msgstr ""

#: cura/UI/AddPrinterPagesModel.py:33 plugins/3MFReader/WorkspaceDialog.qml:386
#: plugins/ImageReader/ConfigUI.qml:323
#: plugins/SliceInfoPlugin/MoreInfoWindow.qml:147
#: plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27
#: plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:43
#: resources/qml/ColorDialog.qml:143
#: resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:59
#: resources/qml/Dialogs/RenameDialog.qml:103
#: resources/qml/Dialogs/WorkspaceSummaryDialog.qml:293
msgctxt "@action:button"
msgid "Cancel"
msgstr "Peruuta"

#: cura/UI/ObjectsModel.py:69
#, python-brace-format
msgctxt "@label"
msgid "Group #{group_nr}"
msgstr ""

#: cura/UI/PrintInformation.py:87
msgctxt "@tooltip"
msgid "Outer Wall"
msgstr "Ulkoseinämä"

#: cura/UI/PrintInformation.py:88
msgctxt "@tooltip"
msgid "Inner Walls"
msgstr "Sisäseinämät"

#: cura/UI/PrintInformation.py:89
msgctxt "@tooltip"
msgid "Skin"
msgstr "Pintakalvo"

#: cura/UI/PrintInformation.py:90
msgctxt "@tooltip"
msgid "Infill"
msgstr "Täyttö"

#: cura/UI/PrintInformation.py:91
msgctxt "@tooltip"
msgid "Support Infill"
msgstr "Tuen täyttö"

#: cura/UI/PrintInformation.py:92
msgctxt "@tooltip"
msgid "Support Interface"
msgstr "Tukiliittymä"

#: cura/UI/PrintInformation.py:93
msgctxt "@tooltip"
msgid "Support"
msgstr "Tuki"

#: cura/UI/PrintInformation.py:94
msgctxt "@tooltip"
msgid "Skirt"
msgstr "Helma"

#: cura/UI/PrintInformation.py:95
msgctxt "@tooltip"
msgid "Prime Tower"
msgstr ""

#: cura/UI/PrintInformation.py:96
msgctxt "@tooltip"
msgid "Travel"
msgstr "Siirtoliike"

#: cura/UI/PrintInformation.py:97
msgctxt "@tooltip"
msgid "Retractions"
msgstr "Takaisinvedot"

#: cura/UI/PrintInformation.py:98
msgctxt "@tooltip"
msgid "Other"
msgstr "Muu"

#: cura/UI/TextManager.py:37 cura/UI/TextManager.py:63
msgctxt "@text:window"
msgid "The release notes could not be opened."
msgstr ""

#: cura/UI/WelcomePagesModel.py:57 cura/UI/WelcomePagesModel.py:277
msgctxt "@action:button"
msgid "Next"
msgstr ""

#: cura/UI/WelcomePagesModel.py:286 cura/UI/WhatsNewPagesModel.py:68
msgctxt "@action:button"
msgid "Skip"
msgstr ""

#: cura/UI/WhatsNewPagesModel.py:76
#: plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:175
#: plugins/PerObjectSettingsTool/SettingPickDialog.qml:135
#: plugins/PostProcessingPlugin/PostProcessingPlugin.qml:444
#: resources/qml/Dialogs/AboutDialog.qml:188
msgctxt "@action:button"
msgid "Close"
msgstr "Sulje"

#: cura/UltimakerCloud/CloudMaterialSync.py:66
msgctxt "@action:button"
msgid "Please sync the material profiles with your printers before starting to print."
msgstr ""

#: cura/UltimakerCloud/CloudMaterialSync.py:67
msgctxt "@action:button"
msgid "New materials installed"
msgstr ""

#: cura/UltimakerCloud/CloudMaterialSync.py:74
msgctxt "@action:button"
msgid "Sync materials"
msgstr ""

#: cura/UltimakerCloud/CloudMaterialSync.py:82
#: plugins/3MFReader/WorkspaceDialog.py:418 plugins/SolidView/SolidView.py:80
msgctxt "@action:button"
msgid "Learn more"
msgstr ""

#: cura/UltimakerCloud/CloudMaterialSync.py:135
msgctxt "@message:text"
msgid "Could not save material archive to {}:"
msgstr ""

#: cura/UltimakerCloud/CloudMaterialSync.py:136
msgctxt "@message:title"
msgid "Failed to save material archive"
msgstr ""

#: cura/UltimakerCloud/CloudMaterialSync.py:188
msgctxt "@text"
msgid "Unknown error."
msgstr ""

#: plugins/3MFReader/ThreeMFWorkspaceReader.py:558
#, python-brace-format
msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
msgid "Project file <filename>{0}</filename> contains an unknown machine type <message>{1}</message>. Cannot import the machine. Models will be imported instead."
msgstr ""

#: plugins/3MFReader/ThreeMFWorkspaceReader.py:561
msgctxt "@info:title"
msgid "Open Project File"
msgstr ""

#: plugins/3MFReader/ThreeMFWorkspaceReader.py:642
#: plugins/3MFReader/WorkspaceDialog.qml:99
#: plugins/3MFReader/WorkspaceDialog.qml:127
#: plugins/3MFReader/WorkspaceDialog.qml:134
msgctxt "@button"
msgid "Create new"
msgstr "Luo uusi"

#: plugins/3MFReader/ThreeMFWorkspaceReader.py:692
#, python-brace-format
msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
msgid "Project file <filename>{0}</filename> is suddenly inaccessible: <message>{1}</message>."
msgstr ""

#: plugins/3MFReader/ThreeMFWorkspaceReader.py:693
#: plugins/3MFReader/ThreeMFWorkspaceReader.py:701
#: plugins/3MFReader/ThreeMFWorkspaceReader.py:720
msgctxt "@info:title"
msgid "Can't Open Project File"
msgstr ""

#: plugins/3MFReader/ThreeMFWorkspaceReader.py:700
#: plugins/3MFReader/ThreeMFWorkspaceReader.py:718
#, python-brace-format
msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
msgid "Project file <filename>{0}</filename> is corrupt: <message>{1}</message>."
msgstr ""

#: plugins/3MFReader/ThreeMFWorkspaceReader.py:765
#, python-brace-format
msgctxt "@info:error Don't translate the XML tag <filename>!"
msgid "Project file <filename>{0}</filename> is made using profiles that are unknown to this version of UltiMaker Cura."
msgstr ""

#: plugins/3MFReader/WorkspaceDialog.py:233
msgctxt "@title:tab"
msgid "Recommended"
msgstr "Suositeltu"

#: plugins/3MFReader/WorkspaceDialog.py:235
msgctxt "@title:tab"
msgid "Custom"
msgstr "Mukautettu"

#: plugins/3MFReader/WorkspaceDialog.py:411
msgctxt "@info:status"
msgid "The material used in this project relies on some material definitions not available in Cura, this might produce undesirable print results. We highly recommend installing the full material package from the Marketplace."
msgstr ""

#: plugins/3MFReader/WorkspaceDialog.py:413
msgctxt "@info:title"
msgid "Material profiles not installed"
msgstr ""

#: plugins/3MFReader/WorkspaceDialog.py:426
msgctxt "@action:button"
msgid "Install Materials"
msgstr ""

#: plugins/3MFReader/WorkspaceDialog.qml:15
msgctxt "@title:window"
msgid "Open Project"
msgstr "Avaa projekti"

#: plugins/3MFReader/WorkspaceDialog.qml:31
#: resources/qml/Dialogs/WorkspaceSummaryDialog.qml:61
msgctxt "@action:title"
msgid "Summary - Cura Project"
msgstr "Yhteenveto – Cura-projekti"

#: plugins/3MFReader/WorkspaceDialog.qml:65
msgctxt "@action:ComboBox Update/override existing profile"
msgid "Update existing"
msgstr ""

#: plugins/3MFReader/WorkspaceDialog.qml:66
msgctxt "@action:ComboBox Save settings in a new profile"
msgid "Create new"
msgstr ""

#: plugins/3MFReader/WorkspaceDialog.qml:83
#: resources/qml/Dialogs/WorkspaceSummaryDialog.qml:97
msgctxt "@action:label"
msgid "Printer settings"
msgstr "Tulostimen asetukset"

#: plugins/3MFReader/WorkspaceDialog.qml:92
#: plugins/3MFReader/WorkspaceRow.qml:23
#: resources/qml/Dialogs/WorkspaceSummaryDialog.qml:106
msgctxt "@action:label"
msgid "Type"
msgstr "Tyyppi"

#: plugins/3MFReader/WorkspaceDialog.qml:98
#: resources/qml/Dialogs/WorkspaceSummaryDialog.qml:121
msgctxt "@action:label"
msgid "Printer Group"
msgstr ""

#: plugins/3MFReader/WorkspaceDialog.qml:103
msgctxt "@action:label"
msgid "Open With"
msgstr ""

#: plugins/3MFReader/WorkspaceDialog.qml:104
msgctxt "@info:tooltip"
msgid "Printer settings will be updated to match the settings saved with the project."
msgstr ""

#: plugins/3MFReader/WorkspaceDialog.qml:156
#: resources/qml/Dialogs/WorkspaceSummaryDialog.qml:222
msgctxt "@action:label"
msgid "Profile settings"
msgstr "Profiilin asetukset"

#: plugins/3MFReader/WorkspaceDialog.qml:166
#: plugins/3MFReader/WorkspaceDialog.qml:238
#: resources/qml/Dialogs/WorkspaceSummaryDialog.qml:121
#: resources/qml/Dialogs/WorkspaceSummaryDialog.qml:246
msgctxt "@action:label"
msgid "Name"
msgstr "Nimi"

#: plugins/3MFReader/WorkspaceDialog.qml:172
#: resources/qml/Dialogs/WorkspaceSummaryDialog.qml:263
msgctxt "@action:label"
msgid "Intent"
msgstr ""

#: plugins/3MFReader/WorkspaceDialog.qml:178
#: resources/qml/Dialogs/WorkspaceSummaryDialog.qml:230
msgctxt "@action:label"
msgid "Not in profile"
msgstr "Ei profiilissa"

#: plugins/3MFReader/WorkspaceDialog.qml:179
#: resources/qml/Dialogs/WorkspaceSummaryDialog.qml:235
msgctxt "@action:label"
msgid "%1 override"
msgid_plural "%1 overrides"
msgstr[0] "%1 ohitus"
msgstr[1] "%1 ohitusta"

#: plugins/3MFReader/WorkspaceDialog.qml:185
msgctxt "@action:label"
msgid "Derivative from"
msgstr "Johdettu seuraavista"

#: plugins/3MFReader/WorkspaceDialog.qml:186
msgctxt "@action:label"
msgid "%1, %2 override"
msgid_plural "%1, %2 overrides"
msgstr[0] "%1, %2 ohitus"
msgstr[1] "%1, %2 ohitusta"

#: plugins/3MFReader/WorkspaceDialog.qml:226
msgctxt "@action:label"
msgid "Material settings"
msgstr "Materiaaliasetukset"

#: plugins/3MFReader/WorkspaceDialog.qml:280
msgctxt "@action:label"
msgid "Setting visibility"
msgstr "Asetusten näkyvyys"

#: plugins/3MFReader/WorkspaceDialog.qml:290
msgctxt "@action:label"
msgid "Mode"
msgstr "Tila"

#: plugins/3MFReader/WorkspaceDialog.qml:296
msgctxt "@action:label"
msgid "%1 out of %2"
msgstr "%1/%2"

#: plugins/3MFReader/WorkspaceDialog.qml:321
msgctxt "@action:warning"
msgid "Loading a project will clear all models on the build plate."
msgstr ""

#: plugins/3MFReader/WorkspaceDialog.qml:367
msgctxt "@label"
msgid "The material used in this project is currently not installed in Cura.<br/>Install the material profile and reopen the project."
msgstr ""

#: plugins/3MFReader/WorkspaceDialog.qml:392
msgctxt "@action:button"
msgid "Open"
msgstr "Avaa"

#: plugins/3MFReader/WorkspaceDialog.qml:398
msgctxt "@action:button"
msgid "Open project anyway"
msgstr ""

#: plugins/3MFReader/WorkspaceDialog.qml:407
msgctxt "@action:button"
msgid "Install missing material"
msgstr ""

#: plugins/3MFReader/__init__.py:27 plugins/3MFReader/__init__.py:33
msgctxt "@item:inlistbox"
msgid "3MF File"
msgstr "3MF-tiedosto"

#: plugins/3MFReader/plugin.json
msgctxt "name"
msgid "3MF Reader"
msgstr "3MF-lukija"

#: plugins/3MFReader/plugin.json
msgctxt "description"
msgid "Provides support for reading 3MF files."
msgstr "Tukee 3MF-tiedostojen lukemista."

#: plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31
msgctxt "@error:zip"
msgid "3MF Writer plug-in is corrupt."
msgstr ""

#: plugins/3MFWriter/ThreeMFWorkspaceWriter.py:37
msgctxt "@error"
msgid "There is no workspace yet to write. Please add a printer first."
msgstr ""

#: plugins/3MFWriter/ThreeMFWorkspaceWriter.py:64
#: plugins/3MFWriter/ThreeMFWorkspaceWriter.py:97
msgctxt "@error:zip"
msgid "No permission to write the workspace here."
msgstr ""

#: plugins/3MFWriter/ThreeMFWorkspaceWriter.py:101
msgctxt "@error:zip"
msgid "The operating system does not allow saving a project file to this location or with this file name."
msgstr ""

#: plugins/3MFWriter/ThreeMFWriter.py:240
msgctxt "@error:zip"
msgid "Error writing 3mf file."
msgstr ""

#: plugins/3MFWriter/__init__.py:28
msgctxt "@item:inlistbox"
msgid "3MF file"
msgstr "3MF-tiedosto"

#: plugins/3MFWriter/__init__.py:36
msgctxt "@item:inlistbox"
msgid "Cura Project 3MF file"
msgstr "Cura-projektin 3MF-tiedosto"

#: plugins/3MFWriter/plugin.json
msgctxt "name"
msgid "3MF Writer"
msgstr "3MF-kirjoitin"

#: plugins/3MFWriter/plugin.json
msgctxt "description"
msgid "Provides support for writing 3MF files."
msgstr "Tukee 3MF-tiedostojen kirjoittamista."

#: plugins/AMFReader/__init__.py:15
msgctxt "@item:inlistbox"
msgid "AMF File"
msgstr ""

#: plugins/AMFReader/plugin.json
msgctxt "name"
msgid "AMF Reader"
msgstr ""

#: plugins/AMFReader/plugin.json
msgctxt "description"
msgid "Provides support for reading AMF files."
msgstr ""

#: plugins/CuraDrive/plugin.json
msgctxt "description"
msgid "Backup and restore your configuration."
msgstr ""

#: plugins/CuraDrive/plugin.json
msgctxt "name"
msgid "Cura Backups"
msgstr ""

#: plugins/CuraDrive/src/CreateBackupJob.py:25
msgctxt "@info:title"
msgid "Backups"
msgstr ""

#: plugins/CuraDrive/src/CreateBackupJob.py:26
msgctxt "@info:backup_status"
msgid "There was an error while uploading your backup."
msgstr ""

#: plugins/CuraDrive/src/CreateBackupJob.py:46
msgctxt "@info:backup_status"
msgid "Creating your backup..."
msgstr ""

#: plugins/CuraDrive/src/CreateBackupJob.py:55
msgctxt "@info:backup_status"
msgid "There was an error while creating your backup."
msgstr ""

#: plugins/CuraDrive/src/CreateBackupJob.py:59
msgctxt "@info:backup_status"
msgid "Uploading your backup..."
msgstr ""

#: plugins/CuraDrive/src/CreateBackupJob.py:69
msgctxt "@info:backup_status"
msgid "Your backup has finished uploading."
msgstr ""

#: plugins/CuraDrive/src/CreateBackupJob.py:103
msgctxt "@error:file_size"
msgid "The backup exceeds the maximum file size."
msgstr ""

#: plugins/CuraDrive/src/DriveApiService.py:86
#: plugins/CuraDrive/src/RestoreBackupJob.py:26
msgctxt "@info:backup_status"
msgid "There was an error trying to restore your backup."
msgstr ""

#: plugins/CuraDrive/src/DrivePluginExtension.py:69
msgctxt "@item:inmenu"
msgid "Manage backups"
msgstr ""

#: plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22
msgctxt "@button"
msgid "Want more?"
msgstr ""

#: plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31
msgctxt "@button"
msgid "Backup Now"
msgstr ""

#: plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43
msgctxt "@checkbox:description"
msgid "Auto Backup"
msgstr ""

#: plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44
msgctxt "@checkbox:description"
msgid "Automatically create a backup each day that Cura is started."
msgstr ""

#: plugins/CuraDrive/src/qml/components/BackupListItem.qml:64
msgctxt "@button"
msgid "Restore"
msgstr ""

#: plugins/CuraDrive/src/qml/components/BackupListItem.qml:93
msgctxt "@dialog:title"
msgid "Delete Backup"
msgstr ""

#: plugins/CuraDrive/src/qml/components/BackupListItem.qml:94
msgctxt "@dialog:info"
msgid "Are you sure you want to delete this backup? This cannot be undone."
msgstr ""

#: plugins/CuraDrive/src/qml/components/BackupListItem.qml:102
msgctxt "@dialog:title"
msgid "Restore Backup"
msgstr ""

#: plugins/CuraDrive/src/qml/components/BackupListItem.qml:103
msgctxt "@dialog:info"
msgid "You will need to restart Cura before your backup is restored. Do you want to close Cura now?"
msgstr ""

#: plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21
msgctxt "@backuplist:label"
msgid "Cura Version"
msgstr ""

#: plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29
msgctxt "@backuplist:label"
msgid "Machines"
msgstr ""

#: plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37
msgctxt "@backuplist:label"
msgid "Materials"
msgstr ""

#: plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45
msgctxt "@backuplist:label"
msgid "Profiles"
msgstr ""

#: plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53
msgctxt "@backuplist:label"
msgid "Plugins"
msgstr ""

#: plugins/CuraDrive/src/qml/main.qml:25
msgctxt "@title:window"
msgid "Cura Backups"
msgstr ""

#: plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28
msgctxt "@title"
msgid "My Backups"
msgstr ""

#: plugins/CuraDrive/src/qml/pages/BackupsPage.qml:36
msgctxt "@empty_state"
msgid "You don't have any backups currently. Use the 'Backup Now' button to create one."
msgstr ""

#: plugins/CuraDrive/src/qml/pages/BackupsPage.qml:55
msgctxt "@backup_limit_info"
msgid "During the preview phase, you'll be limited to 5 visible backups. Remove a backup to see older ones."
msgstr ""

#: plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34
msgctxt "@description"
msgid "Backup and synchronize your Cura settings."
msgstr ""

#: plugins/CuraDrive/src/qml/pages/WelcomePage.qml:47
#: plugins/Marketplace/resources/qml/Marketplace.qml:312
#: resources/qml/Account/GeneralOperations.qml:49
#: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:180
#: resources/qml/WelcomePages/CloudContent.qml:212
msgctxt "@button"
msgid "Sign in"
msgstr ""

#: plugins/CuraEngineBackend/CuraEngineBackend.py:162
msgctxt "@message"
msgid "Slicing failed with an unexpected error. Please consider reporting a bug on our issue tracker."
msgstr ""

#: plugins/CuraEngineBackend/CuraEngineBackend.py:163
msgctxt "@message:title"
msgid "Slicing failed"
msgstr ""

#: plugins/CuraEngineBackend/CuraEngineBackend.py:168
msgctxt "@message:button"
msgid "Report a bug"
msgstr ""

#: plugins/CuraEngineBackend/CuraEngineBackend.py:169
msgctxt "@message:description"
msgid "Report a bug on UltiMaker Cura's issue tracker."
msgstr ""

#: plugins/CuraEngineBackend/CuraEngineBackend.py:416
msgctxt "@info:status"
msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration."
msgstr "Viipalointi ei onnistu nykyisellä materiaalilla, sillä se ei sovellu käytettäväksi valitun laitteen tai kokoonpanon kanssa."

#: plugins/CuraEngineBackend/CuraEngineBackend.py:417
#: plugins/CuraEngineBackend/CuraEngineBackend.py:450
#: plugins/CuraEngineBackend/CuraEngineBackend.py:477
#: plugins/CuraEngineBackend/CuraEngineBackend.py:489
#: plugins/CuraEngineBackend/CuraEngineBackend.py:501
#: plugins/CuraEngineBackend/CuraEngineBackend.py:514
msgctxt "@info:title"
msgid "Unable to slice"
msgstr "Viipalointi ei onnistu"

#: plugins/CuraEngineBackend/CuraEngineBackend.py:449
#, python-brace-format
msgctxt "@info:status"
msgid "Unable to slice with the current settings. The following settings have errors: {0}"
msgstr "Viipalointi ei onnistu nykyisten asetuksien ollessa voimassa. Seuraavissa asetuksissa on virheitä: {0}"

#: plugins/CuraEngineBackend/CuraEngineBackend.py:476
#, python-brace-format
msgctxt "@info:status"
msgid "Unable to slice due to some per-model settings. The following settings have errors on one or more models: {error_labels}"
msgstr ""

#: plugins/CuraEngineBackend/CuraEngineBackend.py:488
msgctxt "@info:status"
msgid "Unable to slice because the prime tower or prime position(s) are invalid."
msgstr "Viipalointi ei onnistu, koska esitäyttötorni tai esitäytön sijainti tai sijainnit eivät kelpaa."

#: plugins/CuraEngineBackend/CuraEngineBackend.py:500
#, python-format
msgctxt "@info:status"
msgid "Unable to slice because there are objects associated with disabled Extruder %s."
msgstr ""

#: plugins/CuraEngineBackend/CuraEngineBackend.py:510
msgctxt "@info:status"
msgid ""
"Please review settings and check if your models:\n"
"- Fit within the build volume\n"
"- Are assigned to an enabled extruder\n"
"- Are not all set as modifier meshes"
msgstr ""

#: plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52
#: plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
msgctxt "@info:status"
msgid "Processing Layers"
msgstr "Käsitellään kerroksia"

#: plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:261
msgctxt "@info:title"
msgid "Information"
msgstr "Tiedot"

#: plugins/CuraEngineBackend/plugin.json
msgctxt "name"
msgid "CuraEngine Backend"
msgstr "CuraEngine-taustaosa"

#: plugins/CuraEngineBackend/plugin.json
msgctxt "description"
msgid "Provides the link to the CuraEngine slicing backend."
msgstr "Linkki CuraEngine-viipalointiin taustalla."

#: plugins/CuraProfileReader/__init__.py:14
#: plugins/CuraProfileWriter/__init__.py:14
msgctxt "@item:inlistbox"
msgid "Cura Profile"
msgstr "Cura-profiili"

#: plugins/CuraProfileReader/plugin.json
msgctxt "name"
msgid "Cura Profile Reader"
msgstr "Cura-profiilin lukija"

#: plugins/CuraProfileReader/plugin.json
msgctxt "description"
msgid "Provides support for importing Cura profiles."
msgstr "Tukee Cura-profiilien tuontia."

#: plugins/CuraProfileWriter/plugin.json
msgctxt "name"
msgid "Cura Profile Writer"
msgstr "Cura-profiilin kirjoitin"

#: plugins/CuraProfileWriter/plugin.json
msgctxt "description"
msgid "Provides support for exporting Cura profiles."
msgstr "Tukee Cura-profiilien vientiä."

#: plugins/DigitalLibrary/plugin.json
msgctxt "description"
msgid "Connects to the Digital Library, allowing Cura to open files from and save files to the Digital Library."
msgstr ""

#: plugins/DigitalLibrary/plugin.json
msgctxt "name"
msgid "Ultimaker Digital Library"
msgstr ""

#: plugins/DigitalLibrary/resources/qml/SaveProjectFilesPage.qml:216
msgctxt "@option"
msgid "Save Cura project and print file"
msgstr ""

#: plugins/DigitalLibrary/resources/qml/SaveProjectFilesPage.qml:217
msgctxt "@option"
msgid "Save Cura project"
msgstr ""

#: plugins/DigitalLibrary/src/DigitalFactoryProjectResponse.py:19
msgctxt "@text Placeholder for the username if it has been deleted"
msgid "deleted user"
msgstr ""

#: plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:127
msgctxt "@info"
msgid "Could not access update information."
msgstr "Päivitystietoja ei löytynyt."

#: plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17
#, python-brace-format
msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!"
msgid "New features or bug-fixes may be available for your {machine_name}! If you haven't done so already, it is recommended to update the firmware on your printer to version {latest_version}."
msgstr ""

#: plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22
#, python-format
msgctxt "@info:title The %s gets replaced with the printer name."
msgid "New %s stable firmware available"
msgstr ""

#: plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28
msgctxt "@action:button"
msgid "How to update"
msgstr ""

#: plugins/FirmwareUpdateChecker/plugin.json
msgctxt "description"
msgid "Checks for firmware updates."
msgstr "Tarkistaa laiteohjelmistopäivitykset."

#: plugins/FirmwareUpdateChecker/plugin.json
msgctxt "name"
msgid "Firmware Update Checker"
msgstr "Laiteohjelmiston päivitysten tarkistus"

#: plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:27
msgctxt "@action"
msgid "Update Firmware"
msgstr ""

#: plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31
msgctxt "@title"
msgid "Update Firmware"
msgstr ""

#: plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:37
msgctxt "@label"
msgid "Firmware is the piece of software running directly on your 3D printer. This firmware controls the step motors, regulates the temperature and ultimately makes your printer work."
msgstr "Laiteohjelmisto on suoraan 3D-tulostimessa toimiva ohjelma. Laiteohjelmisto ohjaa askelmoottoreita, säätää lämpötilaa ja saa tulostimen toimimaan."

#: plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:43
msgctxt "@label"
msgid "The firmware shipping with new printers works, but new versions tend to have more features and improvements."
msgstr "Uusien tulostimien mukana toimitettava laiteohjelmisto toimii, mutta uusissa versioissa on yleensä enemmän toimintoja ja parannuksia."

#: plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:55
msgctxt "@action:button"
msgid "Automatically upgrade Firmware"
msgstr "Päivitä laiteohjelmisto automaattisesti"

#: plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:66
msgctxt "@action:button"
msgid "Upload custom Firmware"
msgstr "Lataa mukautettu laiteohjelmisto"

#: plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:79
msgctxt "@label"
msgid "Firmware can not be updated because there is no connection with the printer."
msgstr ""

#: plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:86
msgctxt "@label"
msgid "Firmware can not be updated because the connection with the printer does not support upgrading firmware."
msgstr ""

#: plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:93
msgctxt "@title:window"
msgid "Select custom firmware"
msgstr "Valitse mukautettu laiteohjelmisto"

#: plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:113
msgctxt "@title:window"
msgid "Firmware Update"
msgstr "Laiteohjelmiston päivitys"

#: plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:137
msgctxt "@label"
msgid "Updating firmware."
msgstr "Päivitetään laiteohjelmistoa."

#: plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:139
msgctxt "@label"
msgid "Firmware update completed."
msgstr "Laiteohjelmiston päivitys suoritettu."

#: plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:141
msgctxt "@label"
msgid "Firmware update failed due to an unknown error."
msgstr "Laiteohjelmiston päivitys epäonnistui tuntemattoman virheen takia."

#: plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:143
msgctxt "@label"
msgid "Firmware update failed due to an communication error."
msgstr "Laiteohjelmiston päivitys epäonnistui tietoliikennevirheen takia."

#: plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:145
msgctxt "@label"
msgid "Firmware update failed due to an input/output error."
msgstr "Laiteohjelmiston päivitys epäonnistui tiedoston lukemiseen tai kirjoittamiseen liittyvän virheen takia."

#: plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:147
msgctxt "@label"
msgid "Firmware update failed due to missing firmware."
msgstr "Laiteohjelmiston päivitys epäonnistui puuttuvan laiteohjelmiston takia."

#: plugins/FirmwareUpdater/plugin.json
msgctxt "name"
msgid "Firmware Updater"
msgstr ""

#: plugins/FirmwareUpdater/plugin.json
msgctxt "description"
msgid "Provides a machine actions for updating firmware."
msgstr ""

#: plugins/GCodeGzReader/__init__.py:17 plugins/GCodeGzWriter/__init__.py:17
msgctxt "@item:inlistbox"
msgid "Compressed G-code File"
msgstr ""

#: plugins/GCodeGzReader/plugin.json
msgctxt "name"
msgid "Compressed G-code Reader"
msgstr ""

#: plugins/GCodeGzReader/plugin.json
msgctxt "description"
msgid "Reads g-code from a compressed archive."
msgstr ""

#: plugins/GCodeGzWriter/GCodeGzWriter.py:43
msgctxt "@error:not supported"
msgid "GCodeGzWriter does not support text mode."
msgstr ""

#: plugins/GCodeGzWriter/plugin.json
msgctxt "name"
msgid "Compressed G-code Writer"
msgstr ""

#: plugins/GCodeGzWriter/plugin.json
msgctxt "description"
msgid "Writes g-code to a compressed archive."
msgstr ""

#: plugins/GCodeProfileReader/__init__.py:14 plugins/GCodeReader/__init__.py:14
#: plugins/GCodeWriter/__init__.py:16
msgctxt "@item:inlistbox"
msgid "G-code File"
msgstr "GCode-tiedosto"

#: plugins/GCodeProfileReader/plugin.json
msgctxt "name"
msgid "G-code Profile Reader"
msgstr ""

#: plugins/GCodeProfileReader/plugin.json
msgctxt "description"
msgid "Provides support for importing profiles from g-code files."
msgstr "Tukee profiilien tuontia GCode-tiedostoista."

#: plugins/GCodeReader/FlavorParser.py:359
msgctxt "@info:status"
msgid "Parsing G-code"
msgstr "G-coden jäsennys"

#: plugins/GCodeReader/FlavorParser.py:361
#: plugins/GCodeReader/FlavorParser.py:515
msgctxt "@info:title"
msgid "G-code Details"
msgstr "G-coden tiedot"

#: plugins/GCodeReader/FlavorParser.py:513
msgctxt "@info:generic"
msgid "Make sure the g-code is suitable for your printer and printer configuration before sending the file to it. The g-code representation may not be accurate."
msgstr "Varmista, että G-code on tulostimelle ja sen tulostusasetuksille soveltuva, ennen kuin lähetät tiedoston siihen. G-coden esitys ei välttämättä ole tarkka."

#: plugins/GCodeReader/__init__.py:18
msgctxt "@item:inlistbox"
msgid "G File"
msgstr "G File -tiedosto"

#: plugins/GCodeReader/plugin.json
msgctxt "description"
msgid "Allows loading and displaying G-code files."
msgstr "Mahdollistaa GCode-tiedostojen lataamisen ja näyttämisen."

#: plugins/GCodeReader/plugin.json
msgctxt "name"
msgid "G-code Reader"
msgstr "GCode-lukija"

#: plugins/GCodeWriter/GCodeWriter.py:75
msgctxt "@error:not supported"
msgid "GCodeWriter does not support non-text mode."
msgstr ""

#: plugins/GCodeWriter/GCodeWriter.py:81 plugins/GCodeWriter/GCodeWriter.py:97
msgctxt "@warning:status"
msgid "Please prepare G-code before exporting."
msgstr ""

#: plugins/GCodeWriter/plugin.json
msgctxt "name"
msgid "G-code Writer"
msgstr ""

#: plugins/GCodeWriter/plugin.json
msgctxt "description"
msgid "Writes g-code to a file."
msgstr ""

#: plugins/ImageReader/ConfigUI.qml:14
msgctxt "@title:window"
msgid "Convert Image"
msgstr ""

#: plugins/ImageReader/ConfigUI.qml:33
msgctxt "@action:label"
msgid "Height (mm)"
msgstr "Korkeus (mm)"

#: plugins/ImageReader/ConfigUI.qml:56
msgctxt "@info:tooltip"
msgid "The maximum distance of each pixel from \"Base.\""
msgstr "Kunkin pikselin suurin etäisyys \"Pohja\"-arvosta."

#: plugins/ImageReader/ConfigUI.qml:66
msgctxt "@action:label"
msgid "Base (mm)"
msgstr "Pohja (mm)"

#: plugins/ImageReader/ConfigUI.qml:90
msgctxt "@info:tooltip"
msgid "The base height from the build plate in millimeters."
msgstr "Pohjan korkeus alustasta millimetreinä."

#: plugins/ImageReader/ConfigUI.qml:100
msgctxt "@action:label"
msgid "Width (mm)"
msgstr "Leveys (mm)"

#: plugins/ImageReader/ConfigUI.qml:124
msgctxt "@info:tooltip"
msgid "The width in millimeters on the build plate"
msgstr ""

#: plugins/ImageReader/ConfigUI.qml:134
msgctxt "@action:label"
msgid "Depth (mm)"
msgstr "Syvyys (mm)"

#: plugins/ImageReader/ConfigUI.qml:158
msgctxt "@info:tooltip"
msgid "The depth in millimeters on the build plate"
msgstr "Syvyys millimetreinä alustalla"

#: plugins/ImageReader/ConfigUI.qml:187
msgctxt "@item:inlistbox"
msgid "Darker is higher"
msgstr "Tummempi on korkeampi"

#: plugins/ImageReader/ConfigUI.qml:188
msgctxt "@item:inlistbox"
msgid "Lighter is higher"
msgstr "Vaaleampi on korkeampi"

#: plugins/ImageReader/ConfigUI.qml:195
msgctxt "@info:tooltip"
msgid "For lithophanes dark pixels should correspond to thicker locations in order to block more light coming through. For height maps lighter pixels signify higher terrain, so lighter pixels should correspond to thicker locations in the generated 3D model."
msgstr ""

#: plugins/ImageReader/ConfigUI.qml:205
msgctxt "@action:label"
msgid "Color Model"
msgstr ""

#: plugins/ImageReader/ConfigUI.qml:224
msgctxt "@item:inlistbox"
msgid "Linear"
msgstr ""

#: plugins/ImageReader/ConfigUI.qml:225
msgctxt "@item:inlistbox"
msgid "Translucency"
msgstr ""

#: plugins/ImageReader/ConfigUI.qml:232
msgctxt "@info:tooltip"
msgid "For lithophanes a simple logarithmic model for translucency is available. For height maps the pixel values correspond to heights linearly."
msgstr ""

#: plugins/ImageReader/ConfigUI.qml:242
msgctxt "@action:label"
msgid "1mm Transmittance (%)"
msgstr ""

#: plugins/ImageReader/ConfigUI.qml:263
msgctxt "@info:tooltip"
msgid "The percentage of light penetrating a print with a thickness of 1 millimeter. Lowering this value increases the contrast in dark regions and decreases the contrast in light regions of the image."
msgstr ""

#: plugins/ImageReader/ConfigUI.qml:274
msgctxt "@action:label"
msgid "Smoothing"
msgstr "Tasoitus"

#: plugins/ImageReader/ConfigUI.qml:298
msgctxt "@info:tooltip"
msgid "The amount of smoothing to apply to the image."
msgstr "Kuvassa käytettävän tasoituksen määrä."

#: plugins/ImageReader/ConfigUI.qml:329
#: plugins/SliceInfoPlugin/MoreInfoWindow.qml:136
#: resources/qml/ColorDialog.qml:148 resources/qml/Dialogs/RenameDialog.qml:25
msgctxt "@action:button"
msgid "OK"
msgstr "OK"

#: plugins/ImageReader/__init__.py:14
msgctxt "@item:inlistbox"
msgid "JPG Image"
msgstr "JPG-kuva"

#: plugins/ImageReader/__init__.py:18
msgctxt "@item:inlistbox"
msgid "JPEG Image"
msgstr "JPEG-kuva"

#: plugins/ImageReader/__init__.py:22
msgctxt "@item:inlistbox"
msgid "PNG Image"
msgstr "PNG-kuva"

#: plugins/ImageReader/__init__.py:26
msgctxt "@item:inlistbox"
msgid "BMP Image"
msgstr "BMP-kuva"

#: plugins/ImageReader/__init__.py:30
msgctxt "@item:inlistbox"
msgid "GIF Image"
msgstr "GIF-kuva"

#: plugins/ImageReader/plugin.json
msgctxt "description"
msgid "Enables ability to generate printable geometry from 2D image files."
msgstr "Mahdollistaa tulostettavien geometrioiden luomisen 2D-kuvatiedostoista."

#: plugins/ImageReader/plugin.json
msgctxt "name"
msgid "Image Reader"
msgstr "Kuvanlukija"

#: plugins/LegacyProfileReader/__init__.py:14
msgctxt "@item:inlistbox"
msgid "Cura 15.04 profiles"
msgstr "Cura 15.04 -profiilit"

#: plugins/LegacyProfileReader/plugin.json
msgctxt "name"
msgid "Legacy Cura Profile Reader"
msgstr "Aikaisempien Cura-profiilien lukija"

#: plugins/LegacyProfileReader/plugin.json
msgctxt "description"
msgid "Provides support for importing profiles from legacy Cura versions."
msgstr "Tukee profiilien tuontia aikaisemmista Cura-versioista."

#: plugins/MachineSettingsAction/MachineSettingsAction.py:32
msgctxt "@action"
msgid "Machine Settings"
msgstr "Laitteen asetukset"

#: plugins/MachineSettingsAction/MachineSettingsAction.qml:42
msgctxt "@title:tab"
msgid "Printer"
msgstr "Tulostin"

#: plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63
msgctxt "@title:label"
msgid "Nozzle Settings"
msgstr ""

#: plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:74
msgctxt "@label"
msgid "Nozzle size"
msgstr "Suuttimen koko"

#: plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:78
#: plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:92
#: plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:108
#: plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:123
#: plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:72
#: plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:87
#: plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:102
#: plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201
#: plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221
#: plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241
#: plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261
#: plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279
#: resources/qml/PrintSetupSelector/Recommended/RecommendedStrengthSelector.qml:85
#: resources/qml/PrintSetupSelector/Recommended/RecommendedStrengthSelector.qml:99
msgctxt "@label"
msgid "mm"
msgstr "mm"

#: plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:88
msgctxt "@label"
msgid "Compatible material diameter"
msgstr ""

#: plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:104
msgctxt "@label"
msgid "Nozzle offset X"
msgstr "Suuttimen X-siirtymä"

#: plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:119
msgctxt "@label"
msgid "Nozzle offset Y"
msgstr "Suuttimen Y-siirtymä"

#: plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:134
msgctxt "@label"
msgid "Cooling Fan Number"
msgstr ""

#: plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:162
msgctxt "@title:label"
msgid "Extruder Start G-code"
msgstr ""

#: plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:176
msgctxt "@title:label"
msgid "Extruder End G-code"
msgstr ""

#: plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56
msgctxt "@title:label"
msgid "Printer Settings"
msgstr ""

#: plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:68
msgctxt "@label"
msgid "X (Width)"
msgstr "X (leveys)"

#: plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:83
msgctxt "@label"
msgid "Y (Depth)"
msgstr "Y (syvyys)"

#: plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:98
msgctxt "@label"
msgid "Z (Height)"
msgstr "Z (korkeus)"

#: plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:112
msgctxt "@label"
msgid "Build plate shape"
msgstr "Alustan muoto"

#: plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:125
msgctxt "@label"
msgid "Origin at center"
msgstr ""

#: plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:137
msgctxt "@label"
msgid "Heated bed"
msgstr ""

#: plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:149
msgctxt "@label"
msgid "Heated build volume"
msgstr ""

#: plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:161
msgctxt "@label"
msgid "G-code flavor"
msgstr ""

#: plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:185
msgctxt "@title:label"
msgid "Printhead Settings"
msgstr ""

#: plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:197
msgctxt "@label"
msgid "X min"
msgstr "X väh"

#: plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:217
msgctxt "@label"
msgid "Y min"
msgstr "Y väh"

#: plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:237
msgctxt "@label"
msgid "X max"
msgstr "X enint"

#: plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:257
msgctxt "@label"
msgid "Y max"
msgstr "Y enint"

#: plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:275
msgctxt "@label"
msgid "Gantry Height"
msgstr ""

#: plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:289
msgctxt "@label"
msgid "Number of Extruders"
msgstr "Suulakkeiden määrä"

#: plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:342
msgctxt "@label"
msgid "Apply Extruder offsets to GCode"
msgstr ""

#: plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:390
msgctxt "@title:label"
msgid "Start G-code"
msgstr ""

#: plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:401
msgctxt "@title:label"
msgid "End G-code"
msgstr ""

#: plugins/MachineSettingsAction/plugin.json
msgctxt "name"
msgid "Machine Settings Action"
msgstr ""

#: plugins/MachineSettingsAction/plugin.json
msgctxt "description"
msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)."
msgstr ""

#: plugins/Marketplace/CloudSync/CloudPackageChecker.py:144
msgctxt "@info:generic"
msgid "Do you want to sync material and software packages with your account?"
msgstr ""

#: plugins/Marketplace/CloudSync/CloudPackageChecker.py:145
#: plugins/Marketplace/CloudSync/DownloadPresenter.py:95
msgctxt "@info:title"
msgid "Changes detected from your UltiMaker account"
msgstr ""

#: plugins/Marketplace/CloudSync/CloudPackageChecker.py:147
msgctxt "@action:button"
msgid "Sync"
msgstr ""

#: plugins/Marketplace/CloudSync/DownloadPresenter.py:91
msgctxt "@info:generic"
msgid "Syncing..."
msgstr ""

#: plugins/Marketplace/CloudSync/LicenseModel.py:12
#: plugins/Marketplace/resources/qml/LicenseDialog.qml:79
msgctxt "@button"
msgid "Decline"
msgstr ""

#: plugins/Marketplace/CloudSync/LicenseModel.py:13
#: resources/qml/WelcomePages/UserAgreementContent.qml:53
msgctxt "@button"
msgid "Agree"
msgstr ""

#: plugins/Marketplace/CloudSync/LicenseModel.py:77
msgctxt "@title:window"
msgid "Plugin License Agreement"
msgstr "Lisäosan lisenssisopimus"

#: plugins/Marketplace/CloudSync/LicensePresenter.py:42
msgctxt "@button"
msgid "Decline and remove from account"
msgstr ""

#: plugins/Marketplace/CloudSync/RestartApplicationPresenter.py:22
msgctxt "@info:generic"
msgid "You need to quit and restart {} before changes have effect."
msgstr ""

#: plugins/Marketplace/CloudSync/SyncOrchestrator.py:79
msgctxt "@info:generic"
msgid "{} plugins failed to download"
msgstr ""

#: plugins/Marketplace/LocalPackageList.py:28
msgctxt "@label"
msgid "Installed Plugins"
msgstr ""

#: plugins/Marketplace/LocalPackageList.py:29
msgctxt "@label"
msgid "Installed Materials"
msgstr ""

#: plugins/Marketplace/LocalPackageList.py:33
msgctxt "@label"
msgid "Bundled Plugins"
msgstr ""

#: plugins/Marketplace/LocalPackageList.py:34
msgctxt "@label"
msgid "Bundled Materials"
msgstr ""

#: plugins/Marketplace/PackageModel.py:43
msgctxt "@label:property"
msgid "Unknown Package"
msgstr ""

#: plugins/Marketplace/PackageModel.py:66
msgctxt "@label:property"
msgid "Unknown Author"
msgstr ""

#: plugins/Marketplace/PackageModel.py:95
msgctxt "@label:label Ultimaker Marketplace is a brand name, don't translate"
msgid "The material package associated with the Cura project could not be found on the Ultimaker Marketplace. Use the partial material profile definition stored in the Cura project file at your own risk."
msgstr ""

#: plugins/Marketplace/RemotePackageList.py:117
msgctxt "@info:error"
msgid "Could not interpret the server's response."
msgstr ""

#: plugins/Marketplace/RemotePackageList.py:148
msgctxt "@info:error"
msgid "Could not reach Marketplace."
msgstr ""

#: plugins/Marketplace/plugin.json
msgctxt "description"
msgid "Manages extensions to the application and allows browsing extensions from the UltiMaker website."
msgstr ""

#: plugins/Marketplace/plugin.json
msgctxt "name"
msgid "Marketplace"
msgstr ""

#: plugins/Marketplace/resources/qml/CompatibilityDialog.qml:15
msgctxt "@title"
msgid "Changes from your account"
msgstr ""

#: plugins/Marketplace/resources/qml/CompatibilityDialog.qml:24
msgctxt "@button"
msgid "Dismiss"
msgstr ""

#: plugins/Marketplace/resources/qml/CompatibilityDialog.qml:24
#: resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:76
#: resources/qml/WelcomePages/WhatsNewContent.qml:175
msgctxt "@button"
msgid "Next"
msgstr ""

#: plugins/Marketplace/resources/qml/CompatibilityDialog.qml:52
msgctxt "@label"
msgid "The following packages will be added:"
msgstr ""

#: plugins/Marketplace/resources/qml/CompatibilityDialog.qml:94
msgctxt "@label"
msgid "The following packages can not be installed because of an incompatible Cura version:"
msgstr ""

#: plugins/Marketplace/resources/qml/InstallMissingPackagesDialog.qml:15
msgctxt "@title"
msgid "Install missing Materials"
msgstr ""

#: plugins/Marketplace/resources/qml/LicenseDialog.qml:15
msgctxt "@button"
msgid "Plugin license agreement"
msgstr ""

#: plugins/Marketplace/resources/qml/LicenseDialog.qml:47
msgctxt "@text"
msgid "Please read and agree with the plugin licence."
msgstr ""

#: plugins/Marketplace/resources/qml/LicenseDialog.qml:70
msgctxt "@button"
msgid "Accept"
msgstr ""

#: plugins/Marketplace/resources/qml/ManagePackagesButton.qml:32
msgctxt "@info:tooltip"
msgid "Manage packages"
msgstr ""

#: plugins/Marketplace/resources/qml/ManagedPackages.qml:12
msgctxt "@header"
msgid "Manage packages"
msgstr ""

#: plugins/Marketplace/resources/qml/ManagedPackages.qml:16
msgctxt "@text"
msgid "Manage your UltiMaker Cura plugins and material profiles here. Make sure to keep your plugins up to date and backup your setup regularly."
msgstr ""

#: plugins/Marketplace/resources/qml/Marketplace.qml:87
msgctxt "@title"
msgid "Loading..."
msgstr ""

#: plugins/Marketplace/resources/qml/Marketplace.qml:148
msgctxt "@button"
msgid "Plugins"
msgstr ""

#: plugins/Marketplace/resources/qml/Marketplace.qml:156
msgctxt "@button"
msgid "Materials"
msgstr ""

#: plugins/Marketplace/resources/qml/Marketplace.qml:193
msgctxt "@info"
msgid "Search in the browser"
msgstr ""

#: plugins/Marketplace/resources/qml/Marketplace.qml:271
msgctxt "@button"
msgid "In order to use the package you will need to restart Cura"
msgstr ""

#: plugins/Marketplace/resources/qml/Marketplace.qml:279
msgctxt "@info:button, %1 is the application name"
msgid "Quit %1"
msgstr ""

#: plugins/Marketplace/resources/qml/Marketplace.qml:300
msgctxt "@description"
msgid "Please sign in to get verified plugins and materials for UltiMaker Cura Enterprise"
msgstr ""

#: plugins/Marketplace/resources/qml/Materials.qml:8
#: plugins/Marketplace/resources/qml/MissingPackages.qml:8
msgctxt "@header"
msgid "Install Materials"
msgstr ""

#: plugins/Marketplace/resources/qml/Materials.qml:12
msgctxt "@text"
msgid "Select and install material profiles optimised for your UltiMaker 3D printers."
msgstr ""

#: plugins/Marketplace/resources/qml/MultipleLicenseDialog.qml:35
msgctxt "@label"
msgid "You need to accept the license to install the package"
msgstr ""

#: plugins/Marketplace/resources/qml/OnboardBanner.qml:101
#: plugins/Marketplace/resources/qml/PackageCardHeader.qml:205
msgctxt "@button:label"
msgid "Learn More"
msgstr ""

#: plugins/Marketplace/resources/qml/PackageCardHeader.qml:170
msgctxt "@label Is followed by the name of an author"
msgid "By"
msgstr ""

#: plugins/Marketplace/resources/qml/PackageCardHeader.qml:224
msgctxt "@button"
msgid "Disable"
msgstr ""

#: plugins/Marketplace/resources/qml/PackageCardHeader.qml:224
msgctxt "@button"
msgid "Enable"
msgstr ""

#: plugins/Marketplace/resources/qml/PackageCardHeader.qml:242
msgctxt "@button"
msgid "Downgrading..."
msgstr ""

#: plugins/Marketplace/resources/qml/PackageCardHeader.qml:243
msgctxt "@button"
msgid "Downgrade"
msgstr ""

#: plugins/Marketplace/resources/qml/PackageCardHeader.qml:247
msgctxt "@button"
msgid "Installing..."
msgstr ""

#: plugins/Marketplace/resources/qml/PackageCardHeader.qml:248
msgctxt "@button"
msgid "Install"
msgstr ""

#: plugins/Marketplace/resources/qml/PackageCardHeader.qml:252
msgctxt "@button"
msgid "Uninstall"
msgstr ""

#: plugins/Marketplace/resources/qml/PackageCardHeader.qml:267
msgctxt "@button"
msgid "Update"
msgstr ""

#: plugins/Marketplace/resources/qml/PackageCardHeader.qml:267
msgctxt "@button"
msgid "Updating..."
msgstr ""

#: plugins/Marketplace/resources/qml/PackageDetails.qml:15
msgctxt "@header"
msgid "Package details"
msgstr ""

#: plugins/Marketplace/resources/qml/PackageDetails.qml:40
msgctxt "@button:tooltip"
msgid "Back"
msgstr ""

#: plugins/Marketplace/resources/qml/PackagePage.qml:81
msgctxt "@header"
msgid "Description"
msgstr ""

#: plugins/Marketplace/resources/qml/PackagePage.qml:110
msgctxt "@header"
msgid "Compatible printers"
msgstr ""

#: plugins/Marketplace/resources/qml/PackagePage.qml:134
msgctxt "@info"
msgid "No compatibility information"
msgstr ""

#: plugins/Marketplace/resources/qml/PackagePage.qml:152
msgctxt "@header"
msgid "Compatible support materials"
msgstr ""

#: plugins/Marketplace/resources/qml/PackagePage.qml:176
msgctxt "@info No materials"
msgid "None"
msgstr ""

#: plugins/Marketplace/resources/qml/PackagePage.qml:193
msgctxt "@header"
msgid "Compatible with Material Station"
msgstr ""

#: plugins/Marketplace/resources/qml/PackagePage.qml:202
#: plugins/Marketplace/resources/qml/PackagePage.qml:228
msgctxt "@info"
msgid "No"
msgstr ""

#: plugins/Marketplace/resources/qml/PackagePage.qml:202
#: plugins/Marketplace/resources/qml/PackagePage.qml:228
msgctxt "@info"
msgid "Yes"
msgstr ""

#: plugins/Marketplace/resources/qml/PackagePage.qml:219
msgctxt "@header"
msgid "Optimized for Air Manager"
msgstr ""

#: plugins/Marketplace/resources/qml/PackagePage.qml:243
msgctxt "@button"
msgid "Visit plug-in website"
msgstr ""

#: plugins/Marketplace/resources/qml/PackagePage.qml:243
msgctxt "@button"
msgid "Website"
msgstr ""

#: plugins/Marketplace/resources/qml/PackagePage.qml:252
msgctxt "@button"
msgid "Buy spool"
msgstr ""

#: plugins/Marketplace/resources/qml/PackagePage.qml:261
msgctxt "@button"
msgid "Safety datasheet"
msgstr ""

#: plugins/Marketplace/resources/qml/PackagePage.qml:270
msgctxt "@button"
msgid "Technical datasheet"
msgstr ""

#: plugins/Marketplace/resources/qml/Packages.qml:151
msgctxt "@button"
msgid "Failed to load packages:"
msgstr ""

#: plugins/Marketplace/resources/qml/Packages.qml:151
msgctxt "@button"
msgid "Retry?"
msgstr ""

#: plugins/Marketplace/resources/qml/Packages.qml:167
msgctxt "@button"
msgid "Loading"
msgstr ""

#: plugins/Marketplace/resources/qml/Packages.qml:183
msgctxt "@message"
msgid "No more results to load"
msgstr ""

#: plugins/Marketplace/resources/qml/Packages.qml:183
msgctxt "@message"
msgid "No results found with current filter"
msgstr ""

#: plugins/Marketplace/resources/qml/Packages.qml:226
msgctxt "@button"
msgid "Load more"
msgstr ""

#: plugins/Marketplace/resources/qml/Plugins.qml:8
msgctxt "@header"
msgid "Install Plugins"
msgstr ""

#: plugins/Marketplace/resources/qml/Plugins.qml:12
msgctxt "@text"
msgid "Streamline your workflow and customize your UltiMaker Cura experience with plugins contributed by our amazing community of users."
msgstr ""

#: plugins/Marketplace/resources/qml/VerifiedIcon.qml:21
msgctxt "@info"
msgid "UltiMaker Verified Plug-in"
msgstr ""

#: plugins/Marketplace/resources/qml/VerifiedIcon.qml:22
msgctxt "@info"
msgid "UltiMaker Certified Material"
msgstr ""

#: plugins/Marketplace/resources/qml/VerifiedIcon.qml:23
msgctxt "@info"
msgid "UltiMaker Verified Package"
msgstr ""

#: plugins/ModelChecker/ModelChecker.py:31
msgctxt "@info:title"
msgid "3D Model Assistant"
msgstr ""

#: plugins/ModelChecker/ModelChecker.py:97
#, python-brace-format
msgctxt "@info:status"
msgid ""
"<p>One or more 3D models may not print optimally due to the model size and material configuration:</p>\n"
"<p>{model_names}</p>\n"
"<p>Find out how to ensure the best possible print quality and reliability.</p>\n"
"<p><a href=\"https://ultimaker.com/3D-model-assistant\">View print quality guide</a></p>"
msgstr ""

#: plugins/ModelChecker/plugin.json
msgctxt "description"
msgid "Checks models and print configuration for possible printing issues and give suggestions."
msgstr ""

#: plugins/ModelChecker/plugin.json
msgctxt "name"
msgid "Model Checker"
msgstr ""

#: plugins/MonitorStage/MonitorMain.qml:100
msgctxt "@info"
msgid ""
"Please make sure your printer has a connection:\n"
"- Check if the printer is turned on.\n"
"- Check if the printer is connected to the network.\n"
"- Check if you are signed in to discover cloud-connected printers."
msgstr ""

#: plugins/MonitorStage/MonitorMain.qml:113
msgctxt "@info"
msgid "Please connect your printer to the network."
msgstr ""

#: plugins/MonitorStage/MonitorMain.qml:148
msgctxt "@label link to technical assistance"
msgid "View user manuals online"
msgstr ""

#: plugins/MonitorStage/MonitorMain.qml:164
msgctxt "@info"
msgid "In order to monitor your print from Cura, please connect the printer."
msgstr ""

#: plugins/MonitorStage/__init__.py:14
msgctxt "@item:inmenu"
msgid "Monitor"
msgstr ""

#: plugins/MonitorStage/plugin.json
msgctxt "name"
msgid "Monitor Stage"
msgstr ""

#: plugins/MonitorStage/plugin.json
msgctxt "description"
msgid "Provides a monitor stage in Cura."
msgstr ""

#: plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:41
msgctxt "@label"
msgid "Mesh Type"
msgstr ""

#: plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:81
msgctxt "@label"
msgid "Normal model"
msgstr ""

#: plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:96
msgctxt "@label"
msgid "Print as support"
msgstr ""

#: plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:111
msgctxt "@label"
msgid "Modify settings for overlaps"
msgstr ""

#: plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:126
msgctxt "@label"
msgid "Don't support overlaps"
msgstr ""

#: plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:160
msgctxt "@item:inlistbox"
msgid "Infill mesh only"
msgstr ""

#: plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:161
msgctxt "@item:inlistbox"
msgid "Cutting mesh"
msgstr ""

#: plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:386
msgctxt "@action:button"
msgid "Select settings"
msgstr "Valitse asetukset"

#: plugins/PerObjectSettingsTool/SettingPickDialog.qml:17
msgctxt "@title:window"
msgid "Select Settings to Customize for this model"
msgstr "Valitse tätä mallia varten mukautettavat asetukset"

#: plugins/PerObjectSettingsTool/SettingPickDialog.qml:61
#: resources/qml/Preferences/SettingVisibilityPage.qml:102
msgctxt "@label:textbox"
msgid "Filter..."
msgstr "Suodatin..."

#: plugins/PerObjectSettingsTool/SettingPickDialog.qml:75
msgctxt "@label:checkbox"
msgid "Show all"
msgstr "Näytä kaikki"

#: plugins/PerObjectSettingsTool/__init__.py:14
msgctxt "@label"
msgid "Per Model Settings"
msgstr "Mallikohtaiset asetukset"

#: plugins/PerObjectSettingsTool/__init__.py:15
msgctxt "@info:tooltip"
msgid "Configure Per Model Settings"
msgstr "Määritä mallikohtaiset asetukset"

#: plugins/PerObjectSettingsTool/plugin.json
msgctxt "name"
msgid "Per Model Settings Tool"
msgstr "Mallikohtaisten asetusten työkalu"

#: plugins/PerObjectSettingsTool/plugin.json
msgctxt "description"
msgid "Provides the Per Model Settings."
msgstr "Mallikohtaisten asetusten muokkaus."

#: plugins/PostProcessingPlugin/PostProcessingPlugin.py:35
msgctxt "@item:inmenu"
msgid "Post Processing"
msgstr ""

#: plugins/PostProcessingPlugin/PostProcessingPlugin.py:36
msgctxt "@item:inmenu"
msgid "Modify G-Code"
msgstr ""

#: plugins/PostProcessingPlugin/PostProcessingPlugin.qml:17
msgctxt "@title:window"
msgid "Post Processing Plugin"
msgstr "Jälkikäsittelylisäosa"

#: plugins/PostProcessingPlugin/PostProcessingPlugin.qml:57
msgctxt "@label"
msgid "Post Processing Scripts"
msgstr "Jälkikäsittelykomentosarjat"

#: plugins/PostProcessingPlugin/PostProcessingPlugin.qml:215
msgctxt "@action"
msgid "Add a script"
msgstr "Lisää komentosarja"

#: plugins/PostProcessingPlugin/PostProcessingPlugin.qml:251
msgctxt "@label"
msgid "Settings"
msgstr "Asetukset"

#: plugins/PostProcessingPlugin/PostProcessingPlugin.qml:460
msgctxt "@info:tooltip"
msgid "Change active post-processing scripts."
msgstr ""

#: plugins/PostProcessingPlugin/PostProcessingPlugin.qml:464
msgctxt "@info:tooltip"
msgid "The following script is active:"
msgid_plural "The following scripts are active:"
msgstr[0] ""
msgstr[1] ""

#: plugins/PostProcessingPlugin/plugin.json
msgctxt "description"
msgid "Extension that allows for user created scripts for post processing"
msgstr "Lisäosa, jonka avulla käyttäjät voivat luoda komentosarjoja jälkikäsittelyä varten"

#: plugins/PostProcessingPlugin/plugin.json
msgctxt "name"
msgid "Post Processing"
msgstr "Jälkikäsittely"

#: plugins/PrepareStage/PrepareMenu.qml:74
msgctxt "@button"
msgid "Add printer"
msgstr ""

#: plugins/PrepareStage/PrepareMenu.qml:90
msgctxt "@button"
msgid "Manage printers"
msgstr ""

#: plugins/PrepareStage/__init__.py:12
msgctxt "@item:inmenu"
msgid "Prepare"
msgstr ""

#: plugins/PrepareStage/plugin.json
msgctxt "name"
msgid "Prepare Stage"
msgstr ""

#: plugins/PrepareStage/plugin.json
msgctxt "description"
msgid "Provides a prepare stage in Cura."
msgstr ""

#: plugins/PreviewStage/__init__.py:13
msgctxt "@item:inmenu"
msgid "Preview"
msgstr ""

#: plugins/PreviewStage/plugin.json
msgctxt "name"
msgid "Preview Stage"
msgstr ""

#: plugins/PreviewStage/plugin.json
msgctxt "description"
msgid "Provides a preview stage in Cura."
msgstr ""

#: plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23
msgctxt "@action:button Preceded by 'Ready to'."
msgid "Save to Removable Drive"
msgstr "Tallenna siirrettävälle asemalle"

#: plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24
#, python-brace-format
msgctxt "@item:inlistbox"
msgid "Save to Removable Drive {0}"
msgstr "Tallenna siirrettävälle asemalle {0}"

#: plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66
#: plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118
msgctxt "@info:status"
msgid "There are no file formats available to write with!"
msgstr ""

#: plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:109
#, python-brace-format
msgctxt "@info:progress Don't translate the XML tags <filename>!"
msgid "Saving to Removable Drive <filename>{0}</filename>"
msgstr "Tallennetaan siirrettävälle asemalle <filename>{0}</filename>"

#: plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:110
msgctxt "@info:title"
msgid "Saving"
msgstr "Tallennetaan"

#: plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:120
#: plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:123
#, python-brace-format
msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
msgid "Could not save to <filename>{0}</filename>: <message>{1}</message>"
msgstr "Ei voitu tallentaa tiedostoon <filename>{0}</filename>: <message>{1}</message>"

#: plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:139
#, python-brace-format
msgctxt "@info:status Don't translate the tag {device}!"
msgid "Could not find a file name when trying to write to {device}."
msgstr "Ei löydetty tiedostonimeä yritettäessä kirjoittaa laitteeseen {device}."

#: plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:152
#: plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:171
#, python-brace-format
msgctxt "@info:status"
msgid "Could not save to removable drive {0}: {1}"
msgstr "Ei voitu tallentaa siirrettävälle asemalle {0}: {1}"

#: plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:162
#, python-brace-format
msgctxt "@info:status"
msgid "Saved to Removable Drive {0} as {1}"
msgstr "Tallennettu siirrettävälle asemalle {0} nimellä {1}"

#: plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
msgctxt "@info:title"
msgid "File Saved"
msgstr "Tiedosto tallennettu"

#: plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165
msgctxt "@action:button"
msgid "Eject"
msgstr "Poista"

#: plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165
#, python-brace-format
msgctxt "@action"
msgid "Eject removable device {0}"
msgstr "Poista siirrettävä asema {0}"

#: plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:184
#, python-brace-format
msgctxt "@info:status"
msgid "Ejected {0}. You can now safely remove the drive."
msgstr "Poistettu {0}. Voit nyt poistaa aseman turvallisesti."

#: plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:185
msgctxt "@info:title"
msgid "Safely Remove Hardware"
msgstr "Poista laite turvallisesti"

#: plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:188
#, python-brace-format
msgctxt "@info:status"
msgid "Failed to eject {0}. Another program may be using the drive."
msgstr "Kohteen {0} poistaminen epäonnistui. Asema saattaa olla toisen ohjelman käytössä."

#: plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:76
msgctxt "@item:intext"
msgid "Removable Drive"
msgstr "Siirrettävä asema"

#: plugins/RemovableDriveOutputDevice/plugin.json
msgctxt "description"
msgid "Provides removable drive hotplugging and writing support."
msgstr "Tukee irrotettavan aseman kytkemistä lennossa ja sille kirjoittamista."

#: plugins/RemovableDriveOutputDevice/plugin.json
msgctxt "name"
msgid "Removable Drive Output Device Plugin"
msgstr "Irrotettavan aseman tulostusvälineen laajennus"

#: plugins/SentryLogger/plugin.json
msgctxt "description"
msgid "Logs certain events so that they can be used by the crash reporter"
msgstr ""

#: plugins/SentryLogger/plugin.json
msgctxt "name"
msgid "Sentry Logger"
msgstr ""

#: plugins/SimulationView/SimulationView.py:129
msgctxt "@info:status"
msgid "Nothing is shown because you need to slice first."
msgstr ""

#: plugins/SimulationView/SimulationView.py:130
msgctxt "@info:title"
msgid "No layers to show"
msgstr ""

#: plugins/SimulationView/SimulationView.py:132
#: plugins/SolidView/SolidView.py:74
msgctxt "@info:option_text"
msgid "Do not show this message again"
msgstr ""

#: plugins/SimulationView/SimulationViewMenuComponent.qml:18
#: plugins/SimulationView/SimulationViewMenuComponent.qml:47
msgctxt "@label"
msgid "Color scheme"
msgstr "Värimalli"

#: plugins/SimulationView/SimulationViewMenuComponent.qml:104
msgctxt "@label:listbox"
msgid "Material Color"
msgstr "Materiaalin väri"

#: plugins/SimulationView/SimulationViewMenuComponent.qml:108
msgctxt "@label:listbox"
msgid "Line Type"
msgstr "Linjojen tyyppi"

#: plugins/SimulationView/SimulationViewMenuComponent.qml:112
msgctxt "@label:listbox"
msgid "Speed"
msgstr ""

#: plugins/SimulationView/SimulationViewMenuComponent.qml:116
msgctxt "@label:listbox"
msgid "Layer Thickness"
msgstr ""

#: plugins/SimulationView/SimulationViewMenuComponent.qml:120
msgctxt "@label:listbox"
msgid "Line Width"
msgstr ""

#: plugins/SimulationView/SimulationViewMenuComponent.qml:124
msgctxt "@label:listbox"
msgid "Flow"
msgstr ""

#: plugins/SimulationView/SimulationViewMenuComponent.qml:164
msgctxt "@label"
msgid "Compatibility Mode"
msgstr "Yhteensopivuustila"

#: plugins/SimulationView/SimulationViewMenuComponent.qml:231
msgctxt "@label"
msgid "Travels"
msgstr ""

#: plugins/SimulationView/SimulationViewMenuComponent.qml:237
msgctxt "@label"
msgid "Helpers"
msgstr ""

#: plugins/SimulationView/SimulationViewMenuComponent.qml:243
msgctxt "@label"
msgid "Shell"
msgstr ""

#: plugins/SimulationView/SimulationViewMenuComponent.qml:249
msgctxt "@label"
msgid "Infill"
msgstr "Täyttö"

#: plugins/SimulationView/SimulationViewMenuComponent.qml:257
msgctxt "@label"
msgid "Starts"
msgstr ""

#: plugins/SimulationView/SimulationViewMenuComponent.qml:304
msgctxt "@label"
msgid "Only Show Top Layers"
msgstr "Näytä vain yläkerrokset"

#: plugins/SimulationView/SimulationViewMenuComponent.qml:313
msgctxt "@label"
msgid "Show 5 Detailed Layers On Top"
msgstr "Näytä 5 yksityiskohtaista kerrosta ylhäällä"

#: plugins/SimulationView/SimulationViewMenuComponent.qml:326
msgctxt "@label"
msgid "Top / Bottom"
msgstr "Yläosa/alaosa"

#: plugins/SimulationView/SimulationViewMenuComponent.qml:330
msgctxt "@label"
msgid "Inner Wall"
msgstr "Sisäseinämä"

#: plugins/SimulationView/SimulationViewMenuComponent.qml:397
msgctxt "@label"
msgid "min"
msgstr ""

#: plugins/SimulationView/SimulationViewMenuComponent.qml:462
msgctxt "@label"
msgid "max"
msgstr ""

#: plugins/SimulationView/__init__.py:15
msgctxt "@item:inlistbox"
msgid "Layer view"
msgstr "Kerrosnäkymä"

#: plugins/SimulationView/plugin.json
msgctxt "description"
msgid "Provides the preview of sliced layerdata."
msgstr ""

#: plugins/SimulationView/plugin.json
msgctxt "name"
msgid "Simulation View"
msgstr ""

#: plugins/SliceInfoPlugin/MoreInfoWindow.qml:16
msgctxt "@title:window"
msgid "More information on anonymous data collection"
msgstr ""

#: plugins/SliceInfoPlugin/MoreInfoWindow.qml:73
msgctxt "@text:window"
msgid "UltiMaker Cura collects anonymous data in order to improve the print quality and user experience. Below is an example of all the data that is shared:"
msgstr ""

#: plugins/SliceInfoPlugin/MoreInfoWindow.qml:107
msgctxt "@text:window"
msgid "I don't want to send anonymous data"
msgstr ""

#: plugins/SliceInfoPlugin/MoreInfoWindow.qml:116
msgctxt "@text:window"
msgid "Allow sending anonymous data"
msgstr ""

#: plugins/SliceInfoPlugin/SliceInfo.py:95
msgctxt "@text"
msgid "Unable to read example data file."
msgstr ""

#: plugins/SliceInfoPlugin/plugin.json
msgctxt "name"
msgid "Slice info"
msgstr "Viipalointitiedot"

#: plugins/SliceInfoPlugin/plugin.json
msgctxt "description"
msgid "Submits anonymous slice info. Can be disabled through preferences."
msgstr "Lähettää anonyymiä viipalointitietoa. Voidaan lisäasetuksista kytkeä pois käytöstä."

#: plugins/SolidView/SolidView.py:71
msgctxt "@info:status"
msgid "The highlighted areas indicate either missing or extraneous surfaces. Fix your model and open it again into Cura."
msgstr ""

#: plugins/SolidView/SolidView.py:73
msgctxt "@info:title"
msgid "Model Errors"
msgstr ""

#: plugins/SolidView/__init__.py:12
msgctxt "@item:inmenu"
msgid "Solid view"
msgstr "Kiinteä näkymä"

#: plugins/SolidView/plugin.json
msgctxt "description"
msgid "Provides a normal solid mesh view."
msgstr "Näyttää normaalin kiinteän verkkonäkymän."

#: plugins/SolidView/plugin.json
msgctxt "name"
msgid "Solid View"
msgstr "Kiinteä näkymä"

#: plugins/SupportEraser/__init__.py:12
msgctxt "@label"
msgid "Support Blocker"
msgstr ""

#: plugins/SupportEraser/__init__.py:13
msgctxt "@info:tooltip"
msgid "Create a volume in which supports are not printed."
msgstr ""

#: plugins/SupportEraser/plugin.json
msgctxt "description"
msgid "Creates an eraser mesh to block the printing of support in certain places"
msgstr ""

#: plugins/SupportEraser/plugin.json
msgctxt "name"
msgid "Support Eraser"
msgstr ""

#: plugins/TrimeshReader/__init__.py:15
msgctxt "@item:inlistbox 'Open' is part of the name of this file format."
msgid "Open Compressed Triangle Mesh"
msgstr ""

#: plugins/TrimeshReader/__init__.py:19
msgctxt "@item:inlistbox"
msgid "COLLADA Digital Asset Exchange"
msgstr ""

#: plugins/TrimeshReader/__init__.py:23
msgctxt "@item:inlistbox"
msgid "glTF Binary"
msgstr ""

#: plugins/TrimeshReader/__init__.py:27
msgctxt "@item:inlistbox"
msgid "glTF Embedded JSON"
msgstr ""

#: plugins/TrimeshReader/__init__.py:36
msgctxt "@item:inlistbox"
msgid "Stanford Triangle Format"
msgstr ""

#: plugins/TrimeshReader/__init__.py:40
msgctxt "@item:inlistbox"
msgid "Compressed COLLADA Digital Asset Exchange"
msgstr ""

#: plugins/TrimeshReader/plugin.json
msgctxt "description"
msgid "Provides support for reading model files."
msgstr ""

#: plugins/TrimeshReader/plugin.json
msgctxt "name"
msgid "Trimesh Reader"
msgstr ""

#: plugins/UFPReader/__init__.py:22 plugins/UFPWriter/__init__.py:28
msgctxt "@item:inlistbox"
msgid "UltiMaker Format Package"
msgstr ""

#: plugins/UFPReader/plugin.json
msgctxt "description"
msgid "Provides support for reading Ultimaker Format Packages."
msgstr ""

#: plugins/UFPReader/plugin.json
msgctxt "name"
msgid "UFP Reader"
msgstr ""

#: plugins/UFPWriter/UFPWriter.py:64 plugins/UFPWriter/UFPWriter.py:80
#: plugins/UFPWriter/UFPWriter.py:93 plugins/UFPWriter/UFPWriter.py:115
#: plugins/UFPWriter/UFPWriter.py:170 plugins/UFPWriter/UFPWriter.py:180
msgctxt "@info:error"
msgid "Can't write to UFP file:"
msgstr ""

#: plugins/UFPWriter/plugin.json
msgctxt "description"
msgid "Provides support for writing Ultimaker Format Packages."
msgstr ""

#: plugins/UFPWriter/plugin.json
msgctxt "name"
msgid "UFP Writer"
msgstr ""

#: plugins/UM3NetworkPrinting/plugin.json
msgctxt "description"
msgid "Manages network connections to UltiMaker networked printers."
msgstr ""

#: plugins/UM3NetworkPrinting/plugin.json
msgctxt "name"
msgid "UltiMaker Network Connection"
msgstr "UltiMaker-verkkoyhteys"

#: plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:44
msgctxt "@title:window"
msgid "Connect to Networked Printer"
msgstr "Yhdistä verkkotulostimeen"

#: plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:51
msgctxt "@label"
msgid "Select your printer from the list below:"
msgstr ""

#: plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:51
msgctxt "@label"
msgid "To print directly to your printer over the network, please make sure your printer is connected to the network using a network cable or by connecting your printer to your WIFI network. If you don't connect Cura with your printer, you can still use a USB drive to transfer g-code files to your printer."
msgstr ""

#: plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:71
msgctxt "@action:button"
msgid "Edit"
msgstr "Muokkaa"

#: plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:82
#: resources/qml/Preferences/MachinesPage.qml:153
#: resources/qml/Preferences/Materials/MaterialsPage.qml:186
#: resources/qml/Preferences/ProfilesPage.qml:321
msgctxt "@action:button"
msgid "Remove"
msgstr "Poista"

#: plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:90
msgctxt "@action:button"
msgid "Refresh"
msgstr "Päivitä"

#: plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:161
msgctxt "@label"
msgid "If your printer is not listed, read the <a href='%1'>network printing troubleshooting guide</a>"
msgstr "Jos tulostinta ei ole luettelossa, lue <a href='%1'>verkkotulostuksen vianetsintäopas</a>"

#: plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:186
#: resources/qml/WelcomePages/AddPrinterByIpContent.qml:247
msgctxt "@label"
msgid "Type"
msgstr "Tyyppi"

#: plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:202
#: resources/qml/WelcomePages/AddPrinterByIpContent.qml:256
msgctxt "@label"
msgid "Firmware version"
msgstr "Laiteohjelmistoversio"

#: plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:212
#: resources/qml/WelcomePages/AddPrinterByIpContent.qml:266
msgctxt "@label"
msgid "Address"
msgstr "Osoite"

#: plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:232
msgctxt "@label"
msgid "This printer is not set up to host a group of printers."
msgstr ""

#: plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:236
msgctxt "@label"
msgid "This printer is the host for a group of %1 printers."
msgstr ""

#: plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:245
msgctxt "@label"
msgid "The printer at this address has not yet responded."
msgstr "Tämän osoitteen tulostin ei ole vielä vastannut."

#: plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:250
msgctxt "@action:button"
msgid "Connect"
msgstr "Yhdistä"

#: plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:261
msgctxt "@title:window"
msgid "Invalid IP address"
msgstr ""

#: plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:262
#: resources/qml/WelcomePages/AddPrinterByIpContent.qml:141
msgctxt "@text"
msgid "Please enter a valid IP address."
msgstr ""

#: plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:272
msgctxt "@title:window"
msgid "Printer Address"
msgstr "Tulostimen osoite"

#: plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297
#: resources/qml/WelcomePages/AddPrinterByIpContent.qml:97
msgctxt "@label"
msgid "Enter the IP address of your printer on the network."
msgstr ""

#: plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20
msgctxt "@title:window"
msgid "Configuration Changes"
msgstr ""

#: plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:36
msgctxt "@action:button"
msgid "Override"
msgstr ""

#: plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:83
msgctxt "@label"
msgid "The assigned printer, %1, requires the following configuration change:"
msgid_plural "The assigned printer, %1, requires the following configuration changes:"
msgstr[0] ""
msgstr[1] ""

#: plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:87
msgctxt "@label"
msgid "The printer %1 is assigned, but the job contains an unknown material configuration."
msgstr ""

#: plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:97
msgctxt "@label"
msgid "Change material %1 from %2 to %3."
msgstr ""

#: plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:100
msgctxt "@label"
msgid "Load %3 as material %1 (This cannot be overridden)."
msgstr ""

#: plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:103
msgctxt "@label"
msgid "Change print core %1 from %2 to %3."
msgstr ""

#: plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:110
msgctxt "@label"
msgid "Override will use the specified settings with the existing printer configuration. This may result in a failed print."
msgstr ""

#: plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:144
msgctxt "@label"
msgid "Move to top"
msgstr ""

#: plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:155
msgctxt "@label"
msgid "Delete"
msgstr ""

#: plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:186
#: resources/qml/MonitorButton.qml:284
msgctxt "@label"
msgid "Resume"
msgstr ""

#: plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:188
msgctxt "@label"
msgid "Pausing..."
msgstr ""

#: plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:190
msgctxt "@label"
msgid "Resuming..."
msgstr ""

#: plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:192
#: resources/qml/MonitorButton.qml:279 resources/qml/MonitorButton.qml:288
msgctxt "@label"
msgid "Pause"
msgstr ""

#: plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:206
msgctxt "@label"
msgid "Abort"
msgstr ""

#: plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:206
msgctxt "@label"
msgid "Aborting..."
msgstr ""

#: plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:218
msgctxt "@label %1 is the name of a print job."
msgid "Are you sure you want to move %1 to the top of the queue?"
msgstr ""

#: plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:219
msgctxt "@window:title"
msgid "Move print job to top"
msgstr ""

#: plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:227
msgctxt "@label %1 is the name of a print job."
msgid "Are you sure you want to delete %1?"
msgstr ""

#: plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:228
msgctxt "@window:title"
msgid "Delete print job"
msgstr ""

#: plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:236
msgctxt "@label %1 is the name of a print job."
msgid "Are you sure you want to abort %1?"
msgstr ""

#: plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:237
#: resources/qml/MonitorButton.qml:326
msgctxt "@window:title"
msgid "Abort print"
msgstr "Keskeytä tulostus"

#: plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:126
msgctxt "@label"
msgid "Unavailable printer"
msgstr ""

#: plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:128
msgctxt "@label"
msgid "First available"
msgstr ""

#: plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:242
#: plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:246
#: plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:472
msgctxt "@info"
msgid "Please update your printer's firmware to manage the queue remotely."
msgstr ""

#: plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:70
#: plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82
#: plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84
#: plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86
#: plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88
msgctxt "@label:status"
msgid "Aborted"
msgstr ""

#: plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:72
#: plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:74
msgctxt "@label:status"
msgid "Finished"
msgstr "Valmis"

#: plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:76
#: plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78
#: plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356
msgctxt "@label:status"
msgid "Preparing..."
msgstr ""

#: plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80
msgctxt "@label:status"
msgid "Aborting..."
msgstr ""

#: plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90
#: plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92
#: plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94
#: plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96
msgctxt "@label:status"
msgid "Failed"
msgstr ""

#: plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98
msgctxt "@label:status"
msgid "Pausing..."
msgstr ""

#: plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100
msgctxt "@label:status"
msgid "Paused"
msgstr ""

#: plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:102
msgctxt "@label:status"
msgid "Resuming..."
msgstr ""

#: plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:104
msgctxt "@label:status"
msgid "Action required"
msgstr "Vaatii toimenpiteitä"

#: plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:106
msgctxt "@label:status"
msgid "Finishes %1 at %2"
msgstr ""

#: plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:148
msgctxt "@label link to Connect and Cloud interfaces"
msgid "Manage printer"
msgstr ""

#: plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:280
msgctxt "@info"
msgid "Webcam feeds for cloud printers cannot be viewed from UltiMaker Cura. Click \"Manage printer\" to visit Ultimaker Digital Factory and view this webcam."
msgstr ""

#: plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:340
msgctxt "@label:status"
msgid "Loading..."
msgstr ""

#: plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:344
msgctxt "@label:status"
msgid "Unavailable"
msgstr ""

#: plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:348
msgctxt "@label:status"
msgid "Unreachable"
msgstr ""

#: plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:352
msgctxt "@label:status"
msgid "Idle"
msgstr ""

#: plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:361
msgctxt "@label:status"
msgid "Printing"
msgstr "Tulostetaan"

#: plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:402
msgctxt "@label"
msgid "Untitled"
msgstr ""

#: plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:417
msgctxt "@label"
msgid "Anonymous"
msgstr ""

#: plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:438
msgctxt "@label:status"
msgid "Requires configuration changes"
msgstr ""

#: plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:452
msgctxt "@action:button"
msgid "Details"
msgstr ""

#: plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:29
msgctxt "@label"
msgid "Queued"
msgstr "Jonossa"

#: plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:64
msgctxt "@label link to connect manager"
msgid "Manage in browser"
msgstr ""

#: plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:91
msgctxt "@label"
msgid "There are no print jobs in the queue. Slice and send a job to add one."
msgstr ""

#: plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:99
msgctxt "@label"
msgid "Print jobs"
msgstr ""

#: plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:108
msgctxt "@label"
msgid "Total print time"
msgstr ""

#: plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:117
msgctxt "@label"
msgid "Waiting for"
msgstr ""

#: plugins/UM3NetworkPrinting/resources/qml/MonitorStage.qml:117
msgctxt "@info"
msgid "Monitor your printers from everywhere using Ultimaker Digital Factory"
msgstr ""

#: plugins/UM3NetworkPrinting/resources/qml/MonitorStage.qml:129
msgctxt "@button"
msgid "View printers in Digital Factory"
msgstr ""

#: plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:12
msgctxt "@title:window"
msgid "Print over network"
msgstr "Tulosta verkon kautta"

#: plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:53
msgctxt "@action:button"
msgid "Print"
msgstr "Tulosta"

#: plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:81
msgctxt "@label"
msgid "Printer selection"
msgstr ""

#: plugins/UM3NetworkPrinting/src/Cloud/AbstractCloudOutputDevice.py:80
#: plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:162
msgctxt "@action:button"
msgid "Print via cloud"
msgstr ""

#: plugins/UM3NetworkPrinting/src/Cloud/AbstractCloudOutputDevice.py:81
#: plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:163
msgctxt "@properties:tooltip"
msgid "Print via cloud"
msgstr ""

#: plugins/UM3NetworkPrinting/src/Cloud/AbstractCloudOutputDevice.py:82
#: plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:164
msgctxt "@info:status"
msgid "Connected via cloud"
msgstr ""

#: plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:276
msgctxt "@action:button"
msgid "Monitor print"
msgstr ""

#: plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:278
msgctxt "@action:tooltip"
msgid "Track the print in Ultimaker Digital Factory"
msgstr ""

#: plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:298
#, python-brace-format
msgctxt "@error:send"
msgid "Unknown error code when uploading print job: {0}"
msgstr ""

#: plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:422
#: plugins/UM3NetworkPrinting/src/Messages/RemovedPrintersMessage.py:23
msgctxt "info:name"
msgid "Ultimaker Digital Factory"
msgstr ""

#: plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:425
#, python-brace-format
msgctxt "@message {printer_name} is replaced with the name of the printer"
msgid "{printer_name} will be removed until the next account sync."
msgstr ""

#: plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:426
#, python-brace-format
msgctxt "@message {printer_name} is replaced with the name of the printer"
msgid "To remove {printer_name} permanently, visit {digital_factory_link}"
msgstr ""

#: plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:427
#, python-brace-format
msgctxt "@message {printer_name} is replaced with the name of the printer"
msgid "Are you sure you want to remove {printer_name} temporarily?"
msgstr ""

#: plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:474
msgctxt "@title:window"
msgid "Remove printers?"
msgstr ""

#: plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:477
#, python-brace-format
msgctxt "@label"
msgid ""
"You are about to remove {0} printer from Cura. This action cannot be undone.\n"
"Are you sure you want to continue?"
msgid_plural ""
"You are about to remove {0} printers from Cura. This action cannot be undone.\n"
"Are you sure you want to continue?"
msgstr[0] ""
msgstr[1] ""

#: plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:484
msgctxt "@label"
msgid ""
"You are about to remove all printers from Cura. This action cannot be undone.\n"
"Are you sure you want to continue?"
msgstr ""

#: plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:25
#, python-brace-format
msgctxt "@info:status"
msgid ""
"Your printer <b>{printer_name}</b> could be connected via cloud.\n"
" Manage your print queue and monitor your prints from anywhere connecting your printer to Digital Factory"
msgstr ""

#: plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:26
msgctxt "@info:title"
msgid "Are you ready for cloud printing?"
msgstr ""

#: plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:30
msgctxt "@action"
msgid "Get started"
msgstr ""

#: plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:31
#: plugins/UM3NetworkPrinting/src/Messages/PrintJobAwaitingApprovalMessage.py:24
msgctxt "@action"
msgid "Learn more"
msgstr ""

#: plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18
msgctxt "@info:status"
msgid "You are attempting to connect to a printer that is not running UltiMaker Connect. Please update the printer to the latest firmware."
msgstr ""

#: plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21
msgctxt "@info:title"
msgid "Update your printer"
msgstr ""

#: plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24
#, python-brace-format
msgctxt "@info:status"
msgid "Cura has detected material profiles that were not yet installed on the host printer of group {0}."
msgstr ""

#: plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26
msgctxt "@info:title"
msgid "Sending materials to printer"
msgstr ""

#: plugins/UM3NetworkPrinting/src/Messages/NewPrinterDetectedMessage.py:13
msgctxt "info:status"
msgid "New printer detected from your Ultimaker account"
msgid_plural "New printers detected from your Ultimaker account"
msgstr[0] ""
msgstr[1] ""

#: plugins/UM3NetworkPrinting/src/Messages/NewPrinterDetectedMessage.py:29
#, python-brace-format
msgctxt "info:status Filled in with printer name and printer model."
msgid "Adding printer {name} ({model}) from your account"
msgstr ""

#: plugins/UM3NetworkPrinting/src/Messages/NewPrinterDetectedMessage.py:48
#, python-brace-format
msgctxt "info:{0} gets replaced by a number of printers"
msgid "... and {0} other"
msgid_plural "... and {0} others"
msgstr[0] ""
msgstr[1] ""

#: plugins/UM3NetworkPrinting/src/Messages/NewPrinterDetectedMessage.py:57
msgctxt "info:status"
msgid "Printers added from Digital Factory:"
msgstr ""

#: plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27
#, python-brace-format
msgctxt "@info:status"
msgid "You are attempting to connect to {0} but it is not the host of a group. You can visit the web page to configure it as a group host."
msgstr ""

#: plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30
msgctxt "@info:title"
msgid "Not a group host"
msgstr ""

#: plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:36
msgctxt "@action"
msgid "Configure group"
msgstr ""

#: plugins/UM3NetworkPrinting/src/Messages/PrintJobAwaitingApprovalMessage.py:18
msgctxt "@info:status"
msgid "You will receive a confirmation via email when the print job is approved"
msgstr ""

#: plugins/UM3NetworkPrinting/src/Messages/PrintJobAwaitingApprovalMessage.py:19
msgctxt "@info:title"
msgid "The print job was successfully submitted"
msgstr ""

#: plugins/UM3NetworkPrinting/src/Messages/PrintJobAwaitingApprovalMessage.py:22
msgctxt "@action"
msgid "Manage print jobs"
msgstr ""

#: plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15
msgctxt "@info:status"
msgid "Please wait until the current job has been sent."
msgstr ""

#: plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16
msgctxt "@info:title"
msgid "Print error"
msgstr ""

#: plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15
msgctxt "@info:text"
msgid "Could not upload the data to the printer."
msgstr ""

#: plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16
msgctxt "@info:title"
msgid "Network error"
msgstr ""

#: plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15
msgctxt "@info:status"
msgid "Sending Print Job"
msgstr ""

#: plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:16
msgctxt "@info:status"
msgid "Uploading print job to printer."
msgstr ""

#: plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16
msgctxt "@info:status"
msgid "Print job queue is full. The printer can't accept a new job."
msgstr ""

#: plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17
msgctxt "@info:title"
msgid "Queue Full"
msgstr ""

#: plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
msgctxt "@info:status"
msgid "Print job was successfully sent to the printer."
msgstr ""

#: plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16
msgctxt "@info:title"
msgid "Data Sent"
msgstr ""

#: plugins/UM3NetworkPrinting/src/Messages/RemovedPrintersMessage.py:17
msgctxt "info:status"
msgid "This printer is not linked to the Digital Factory:"
msgid_plural "These printers are not linked to the Digital Factory:"
msgstr[0] ""
msgstr[1] ""

#: plugins/UM3NetworkPrinting/src/Messages/RemovedPrintersMessage.py:29
#, python-brace-format
msgctxt "info:status"
msgid "To establish a connection, please visit the {website_link}"
msgstr ""

#: plugins/UM3NetworkPrinting/src/Messages/RemovedPrintersMessage.py:33
msgctxt "info:status"
msgid "A cloud connection is not available for a printer"
msgid_plural "A cloud connection is not available for some printers"
msgstr[0] ""
msgstr[1] ""

#: plugins/UM3NetworkPrinting/src/Messages/RemovedPrintersMessage.py:41
msgctxt "@action:button"
msgid "Keep printer configurations"
msgstr ""

#: plugins/UM3NetworkPrinting/src/Messages/RemovedPrintersMessage.py:46
msgctxt "@action:button"
msgid "Remove printers"
msgstr ""

#: plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:63
msgctxt "@action:button Preceded by 'Ready to'."
msgid "Print over network"
msgstr "Tulosta verkon kautta"

#: plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:64
msgctxt "@properties:tooltip"
msgid "Print over network"
msgstr "Tulosta verkon kautta"

#: plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:65
msgctxt "@info:status"
msgid "Connected over the network"
msgstr ""

#: plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:28
msgctxt "@action"
msgid "Connect via Network"
msgstr "Yhdistä verkon kautta"

#: plugins/UM3NetworkPrinting/src/Utils.py:27
msgctxt "@info:status"
msgid "tomorrow"
msgstr ""

#: plugins/UM3NetworkPrinting/src/Utils.py:30
msgctxt "@info:status"
msgid "today"
msgstr ""

#: plugins/USBPrinting/USBPrinterOutputDevice.py:42
msgctxt "@item:inmenu"
msgid "USB printing"
msgstr "USB-tulostus"

#: plugins/USBPrinting/USBPrinterOutputDevice.py:43
msgctxt "@action:button Preceded by 'Ready to'."
msgid "Print via USB"
msgstr "Tulosta USB:n kautta"

#: plugins/USBPrinting/USBPrinterOutputDevice.py:44
msgctxt "@info:tooltip"
msgid "Print via USB"
msgstr "Tulosta USB:n kautta"

#: plugins/USBPrinting/USBPrinterOutputDevice.py:80
msgctxt "@info:status"
msgid "Connected via USB"
msgstr "Yhdistetty USB:n kautta"

#: plugins/USBPrinting/USBPrinterOutputDevice.py:110
msgctxt "@label"
msgid "A USB print is in progress, closing Cura will stop this print. Are you sure?"
msgstr ""

#: plugins/USBPrinting/USBPrinterOutputDevice.py:135
msgctxt "@message"
msgid "A print is still in progress. Cura cannot start another print via USB until the previous print has completed."
msgstr ""

#: plugins/USBPrinting/USBPrinterOutputDevice.py:136
msgctxt "@message"
msgid "Print in Progress"
msgstr ""

#: plugins/USBPrinting/plugin.json
msgctxt "description"
msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware."
msgstr "Hyväksyy GCode-määrittelyt ja lähettää ne tulostimeen. Lisäosa voi myös päivittää laiteohjelmiston."

#: plugins/USBPrinting/plugin.json
msgctxt "name"
msgid "USB printing"
msgstr "USB-tulostus"

#: plugins/UltimakerMachineActions/BedLevelMachineAction.py:24
msgctxt "@action"
msgid "Level build plate"
msgstr "Tasaa alusta"

#: plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30
msgctxt "@title"
msgid "Build Plate Leveling"
msgstr "Alustan tasaaminen"

#: plugins/UltimakerMachineActions/BedLevelMachineAction.qml:42
msgctxt "@label"
msgid "To make sure your prints will come out great, you can now adjust your buildplate. When you click 'Move to Next Position' the nozzle will move to the different positions that can be adjusted."
msgstr "Voit säätää alustaa, jotta tulosteista tulisi hyviä. Kun napsautat \"Siirry seuraavaan positioon\", suutin siirtyy eri positioihin, joita voidaan säätää."

#: plugins/UltimakerMachineActions/BedLevelMachineAction.qml:52
msgctxt "@label"
msgid "For every position; insert a piece of paper under the nozzle and adjust the print build plate height. The print build plate height is right when the paper is slightly gripped by the tip of the nozzle."
msgstr "Laita paperinpala kussakin positiossa suuttimen alle ja säädä tulostusalustan korkeus. Tulostusalustan korkeus on oikea, kun suuttimen kärki juuri ja juuri osuu paperiin."

#: plugins/UltimakerMachineActions/BedLevelMachineAction.qml:67
msgctxt "@action:button"
msgid "Start Build Plate Leveling"
msgstr "Aloita alustan tasaaminen"

#: plugins/UltimakerMachineActions/BedLevelMachineAction.qml:79
msgctxt "@action:button"
msgid "Move to Next Position"
msgstr "Siirry seuraavaan positioon"

#: plugins/UltimakerMachineActions/UMOUpgradeSelection.py:21
msgctxt "@action"
msgid "Select upgrades"
msgstr "Valitse päivitykset"

#: plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30
msgctxt "@label"
msgid "Please select any upgrades made to this UltiMaker Original"
msgstr "Valitse tähän UltiMaker Original -laitteeseen tehdyt päivitykset"

#: plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:39
msgctxt "@label"
msgid "Heated Build Plate (official kit or self-built)"
msgstr "Lämmitettävä alusta (virallinen sarja tai itse rakennettu)"

#: plugins/UltimakerMachineActions/plugin.json
msgctxt "description"
msgid "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc.)."
msgstr "UltiMaker-laitteiden toimintojen käyttö (esim. pöydän tasaaminen, päivitysten valinta yms.)"

#: plugins/UltimakerMachineActions/plugin.json
msgctxt "name"
msgid "UltiMaker machine actions"
msgstr ""

#: plugins/VersionUpgrade/VersionUpgrade21to22/plugin.json
msgctxt "description"
msgid "Upgrades configurations from Cura 2.1 to Cura 2.2."
msgstr "Päivittää kokoonpanon versiosta Cura 2.1 versioon Cura 2.2."

#: plugins/VersionUpgrade/VersionUpgrade21to22/plugin.json
msgctxt "name"
msgid "Version Upgrade 2.1 to 2.2"
msgstr "Päivitys versiosta 2.1 versioon 2.2"

#: plugins/VersionUpgrade/VersionUpgrade22to24/plugin.json
msgctxt "description"
msgid "Upgrades configurations from Cura 2.2 to Cura 2.4."
msgstr "Päivittää kokoonpanon versiosta Cura 2.2 versioon Cura 2.4."

#: plugins/VersionUpgrade/VersionUpgrade22to24/plugin.json
msgctxt "name"
msgid "Version Upgrade 2.2 to 2.4"
msgstr "Päivitys versiosta 2.2 versioon 2.4"

#: plugins/VersionUpgrade/VersionUpgrade25to26/plugin.json
msgctxt "description"
msgid "Upgrades configurations from Cura 2.5 to Cura 2.6."
msgstr "Päivittää kokoonpanon versiosta Cura 2.5 versioon Cura 2.6."

#: plugins/VersionUpgrade/VersionUpgrade25to26/plugin.json
msgctxt "name"
msgid "Version Upgrade 2.5 to 2.6"
msgstr "Päivitys versiosta 2.5 versioon 2.6"

#: plugins/VersionUpgrade/VersionUpgrade26to27/plugin.json
msgctxt "description"
msgid "Upgrades configurations from Cura 2.6 to Cura 2.7."
msgstr "Päivittää kokoonpanon versiosta Cura 2.6 versioon Cura 2.7."

#: plugins/VersionUpgrade/VersionUpgrade26to27/plugin.json
msgctxt "name"
msgid "Version Upgrade 2.6 to 2.7"
msgstr "Päivitys versiosta 2.6 versioon 2.7"

#: plugins/VersionUpgrade/VersionUpgrade27to30/plugin.json
msgctxt "description"
msgid "Upgrades configurations from Cura 2.7 to Cura 3.0."
msgstr "Päivittää kokoonpanon versiosta Cura 2.7 versioon Cura 3.0."

#: plugins/VersionUpgrade/VersionUpgrade27to30/plugin.json
msgctxt "name"
msgid "Version Upgrade 2.7 to 3.0"
msgstr "Päivitys versiosta 2.7 versioon 3.0"

#: plugins/VersionUpgrade/VersionUpgrade30to31/plugin.json
msgctxt "description"
msgid "Upgrades configurations from Cura 3.0 to Cura 3.1."
msgstr "Päivittää kokoonpanon versiosta Cura 3.0 versioon Cura 3.1."

#: plugins/VersionUpgrade/VersionUpgrade30to31/plugin.json
msgctxt "name"
msgid "Version Upgrade 3.0 to 3.1"
msgstr "Päivitys versiosta 3.0 versioon 3.1"

#: plugins/VersionUpgrade/VersionUpgrade32to33/plugin.json
msgctxt "description"
msgid "Upgrades configurations from Cura 3.2 to Cura 3.3."
msgstr "Päivittää kokoonpanon versiosta Cura 3.2 versioon Cura 3.3."

#: plugins/VersionUpgrade/VersionUpgrade32to33/plugin.json
msgctxt "name"
msgid "Version Upgrade 3.2 to 3.3"
msgstr "Päivitys versiosta 3.2 versioon 3.3"

#: plugins/VersionUpgrade/VersionUpgrade33to34/plugin.json
msgctxt "description"
msgid "Upgrades configurations from Cura 3.3 to Cura 3.4."
msgstr "Päivittää kokoonpanon versiosta Cura 3.3 versioon Cura 3.4."

#: plugins/VersionUpgrade/VersionUpgrade33to34/plugin.json
msgctxt "name"
msgid "Version Upgrade 3.3 to 3.4"
msgstr "Päivitys versiosta 3.3 versioon 3.4"

#: plugins/VersionUpgrade/VersionUpgrade34to35/plugin.json
msgctxt "description"
msgid "Upgrades configurations from Cura 3.4 to Cura 3.5."
msgstr "Päivittää kokoonpanon versiosta Cura 3.4 versioon Cura 3.5."

#: plugins/VersionUpgrade/VersionUpgrade34to35/plugin.json
msgctxt "name"
msgid "Version Upgrade 3.4 to 3.5"
msgstr "Päivitys versiosta 3.4 versioon 3.5"

#: plugins/VersionUpgrade/VersionUpgrade35to40/plugin.json
msgctxt "description"
msgid "Upgrades configurations from Cura 3.5 to Cura 4.0."
msgstr "Päivittää kokoonpanon versiosta Cura 3.5 versioon Cura 4.0."

#: plugins/VersionUpgrade/VersionUpgrade35to40/plugin.json
msgctxt "name"
msgid "Version Upgrade 3.5 to 4.0"
msgstr "Päivitys versiosta 3.5 versioon 4.0"

#: plugins/VersionUpgrade/VersionUpgrade40to41/plugin.json
msgctxt "description"
msgid "Upgrades configurations from Cura 4.0 to Cura 4.1."
msgstr "Päivittää kokoonpanon versiosta Cura 4.0 versioon Cura 4.1."

#: plugins/VersionUpgrade/VersionUpgrade40to41/plugin.json
msgctxt "name"
msgid "Version Upgrade 4.0 to 4.1"
msgstr "Päivitys versiosta 4.0 versioon 4.1"

#: plugins/VersionUpgrade/VersionUpgrade411to412/plugin.json
msgctxt "description"
msgid "Upgrades configurations from Cura 4.11 to Cura 4.12."
msgstr "Päivittää kokoonpanon versiosta Cura 4.11 versioon Cura 4.12."

#: plugins/VersionUpgrade/VersionUpgrade411to412/plugin.json
msgctxt "name"
msgid "Version Upgrade 4.11 to 4.12"
msgstr "Päivitys versiosta 4.11 versioon 4.12"

#: plugins/VersionUpgrade/VersionUpgrade413to50/plugin.json
msgctxt "description"
msgid "Upgrades configurations from Cura 4.13 to Cura 5.0."
msgstr "Päivittää kokoonpanon versiosta Cura 4.13 versioon Cura 5.0."

#: plugins/VersionUpgrade/VersionUpgrade413to50/plugin.json
msgctxt "name"
msgid "Version Upgrade 4.13 to 5.0"
msgstr "Päivitys versiosta 4.13 versioon 5.0"

#: plugins/VersionUpgrade/VersionUpgrade41to42/plugin.json
msgctxt "description"
msgid "Upgrades configurations from Cura 4.1 to Cura 4.2."
msgstr "Päivittää kokoonpanon versiosta Cura 4.1 versioon Cura 4.2."

#: plugins/VersionUpgrade/VersionUpgrade41to42/plugin.json
msgctxt "name"
msgid "Version Upgrade 4.1 to 4.2"
msgstr "Päivitys versiosta 4.1 versioon 4.2"

#: plugins/VersionUpgrade/VersionUpgrade42to43/plugin.json
msgctxt "description"
msgid "Upgrades configurations from Cura 4.2 to Cura 4.3."
msgstr "Päivittää kokoonpanon versiosta Cura 4.2 versioon Cura 4.3."

#: plugins/VersionUpgrade/VersionUpgrade42to43/plugin.json
msgctxt "name"
msgid "Version Upgrade 4.2 to 4.3"
msgstr "Päivitys versiosta 4.2 versioon 4.3"

#: plugins/VersionUpgrade/VersionUpgrade43to44/plugin.json
msgctxt "description"
msgid "Upgrades configurations from Cura 4.3 to Cura 4.4."
msgstr "Päivittää kokoonpanon versiosta Cura 4.3 versioon Cura 4.4."

#: plugins/VersionUpgrade/VersionUpgrade43to44/plugin.json
msgctxt "name"
msgid "Version Upgrade 4.3 to 4.4"
msgstr "Päivitys versiosta 4.3 versioon 4.4"

#: plugins/VersionUpgrade/VersionUpgrade44to45/plugin.json
msgctxt "description"
msgid "Upgrades configurations from Cura 4.4 to Cura 4.5."
msgstr "Päivittää kokoonpanon versiosta Cura 4.4 versioon Cura 4.5."

#: plugins/VersionUpgrade/VersionUpgrade44to45/plugin.json
msgctxt "name"
msgid "Version Upgrade 4.4 to 4.5"
msgstr "Päivitys versiosta 4.4 versioon 4.5"

#: plugins/VersionUpgrade/VersionUpgrade45to46/plugin.json
msgctxt "description"
msgid "Upgrades configurations from Cura 4.5 to Cura 4.6."
msgstr "Päivittää kokoonpanon versiosta Cura 4.5 versioon Cura 4.6."

#: plugins/VersionUpgrade/VersionUpgrade45to46/plugin.json
msgctxt "name"
msgid "Version Upgrade 4.5 to 4.6"
msgstr "Päivitys versiosta 4.5 versioon 4.6"

#: plugins/VersionUpgrade/VersionUpgrade460to462/plugin.json
msgctxt "description"
msgid "Upgrades configurations from Cura 4.6.0 to Cura 4.6.2."
msgstr "Päivittää kokoonpanon versiosta Cura 4.6.0 versioon Cura 4.6.2."

#: plugins/VersionUpgrade/VersionUpgrade460to462/plugin.json
msgctxt "name"
msgid "Version Upgrade 4.6.0 to 4.6.2"
msgstr "Päivitys versiosta 4.6.0 versioon 4.6.2"

#: plugins/VersionUpgrade/VersionUpgrade462to47/plugin.json
msgctxt "description"
msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7."
msgstr "Päivittää kokoonpanon versiosta Cura 4.6.2 versioon Cura 4.7."

#: plugins/VersionUpgrade/VersionUpgrade462to47/plugin.json
msgctxt "name"
msgid "Version Upgrade 4.6.2 to 4.7"
msgstr "Päivitys versiosta 4.6.2 versioon 4.7"

#: plugins/VersionUpgrade/VersionUpgrade47to48/plugin.json
msgctxt "description"
msgid "Upgrades configurations from Cura 4.7 to Cura 4.8."
msgstr "Päivittää kokoonpanon versiosta Cura 4.7 versioon Cura 4.8."

#: plugins/VersionUpgrade/VersionUpgrade47to48/plugin.json
msgctxt "name"
msgid "Version Upgrade 4.7 to 4.8"
msgstr "Päivitys versiosta 4.7 versioon 4.8"

#: plugins/VersionUpgrade/VersionUpgrade48to49/plugin.json
msgctxt "description"
msgid "Upgrades configurations from Cura 4.8 to Cura 4.9."
msgstr "Päivittää kokoonpanon versiosta Cura 4.8 versioon Cura 4.9."

#: plugins/VersionUpgrade/VersionUpgrade48to49/plugin.json
msgctxt "name"
msgid "Version Upgrade 4.8 to 4.9"
msgstr "Päivitys versiosta 4.8 versioon 4.9"

#: plugins/VersionUpgrade/VersionUpgrade49to410/plugin.json
msgctxt "description"
msgid "Upgrades configurations from Cura 4.9 to Cura 4.10."
msgstr "Päivittää kokoonpanon versiosta Cura 4.9 versioon Cura 4.10."

#: plugins/VersionUpgrade/VersionUpgrade49to410/plugin.json
msgctxt "name"
msgid "Version Upgrade 4.9 to 4.10"
msgstr "Päivitys versiosta 4.9 versioon 4.10"

#: plugins/VersionUpgrade/VersionUpgrade52to53/plugin.json
msgctxt "description"
msgid "Upgrades configurations from Cura 5.2 to Cura 5.3."
msgstr "Päivittää kokoonpanon versiosta Cura 5.2 versioon Cura 5.3."

#: plugins/VersionUpgrade/VersionUpgrade52to53/plugin.json
msgctxt "name"
msgid "Version Upgrade 5.2 to 5.3"
msgstr "Päivitys versiosta 5.2 versioon 5.4"

#: plugins/VersionUpgrade/VersionUpgrade53to54/plugin.json
msgctxt "description"
msgid "Upgrades configurations from Cura 5.3 to Cura 5.4."
msgstr ""

#: plugins/VersionUpgrade/VersionUpgrade53to54/plugin.json
msgctxt "name"
msgid "Version Upgrade 5.3 to 5.4"
msgstr ""

#: plugins/X3DReader/__init__.py:13
msgctxt "@item:inlistbox"
msgid "X3D File"
msgstr "X3D-tiedosto"

#: plugins/X3DReader/plugin.json
msgctxt "description"
msgid "Provides support for reading X3D files."
msgstr "Tukee X3D-tiedostojen lukemista."

#: plugins/X3DReader/plugin.json
msgctxt "name"
msgid "X3D Reader"
msgstr "X3D-lukija"

#: plugins/XRayView/__init__.py:12
msgctxt "@item:inlistbox"
msgid "X-Ray view"
msgstr "Kerrosnäkymä"

#: plugins/XRayView/plugin.json
msgctxt "description"
msgid "Provides the X-Ray view."
msgstr "Näyttää kerrosnäkymän."

#: plugins/XRayView/plugin.json
msgctxt "name"
msgid "X-Ray View"
msgstr "Kerrosnäkymä"

#: plugins/XmlMaterialProfile/plugin.json
msgctxt "name"
msgid "Material Profiles"
msgstr "Materiaaliprofiilit"

#: plugins/XmlMaterialProfile/plugin.json
msgctxt "description"
msgid "Provides capabilities to read and write XML-based material profiles."
msgstr "Mahdollistaa XML-pohjaisten materiaaliprofiilien lukemisen ja kirjoittamisen."

#: resources/qml/Account/AccountWidget.qml:24
msgctxt "@action:button"
msgid "Sign in"
msgstr ""

#: resources/qml/Account/GeneralOperations.qml:19
#: resources/qml/WelcomePages/CloudContent.qml:64
msgctxt "@label"
msgid "Sign in to the UltiMaker platform"
msgstr ""

#: resources/qml/Account/GeneralOperations.qml:39
msgctxt "@text"
msgid ""
"- Add material profiles and plug-ins from the Marketplace\n"
"- Back-up and sync your material profiles and plug-ins\n"
"- Share ideas and get help from 48,000+ users in the UltiMaker community"
msgstr ""

#: resources/qml/Account/GeneralOperations.qml:58
msgctxt "@button"
msgid "Create a free UltiMaker account"
msgstr ""

#: resources/qml/Account/SyncState.qml:35
msgctxt "@label"
msgid "Checking..."
msgstr ""

#: resources/qml/Account/SyncState.qml:42
msgctxt "@label"
msgid "Account synced"
msgstr ""

#: resources/qml/Account/SyncState.qml:49
msgctxt "@label"
msgid "Something went wrong..."
msgstr ""

#: resources/qml/Account/SyncState.qml:102
msgctxt "@button"
msgid "Install pending updates"
msgstr ""

#: resources/qml/Account/SyncState.qml:123
msgctxt "@button"
msgid "Check for account updates"
msgstr ""

#: resources/qml/Account/UserOperations.qml:78
msgctxt "@label The argument is a timestamp"
msgid "Last update: %1"
msgstr ""

#: resources/qml/Account/UserOperations.qml:107
msgctxt "@button"
msgid "UltiMaker Account"
msgstr ""

#: resources/qml/Account/UserOperations.qml:126
msgctxt "@button"
msgid "Sign Out"
msgstr ""

#: resources/qml/ActionPanel/OutputProcessWidget.qml:59
msgctxt "@label"
msgid "No time estimation available"
msgstr ""

#: resources/qml/ActionPanel/OutputProcessWidget.qml:77
msgctxt "@label"
msgid "No cost estimation available"
msgstr ""

#: resources/qml/ActionPanel/OutputProcessWidget.qml:127
msgctxt "@button"
msgid "Preview"
msgstr ""

#: resources/qml/ActionPanel/PrintJobInformation.qml:31
msgctxt "@label"
msgid "Time estimation"
msgstr ""

#: resources/qml/ActionPanel/PrintJobInformation.qml:107
msgctxt "@label"
msgid "Material estimation"
msgstr ""

#: resources/qml/ActionPanel/PrintJobInformation.qml:156
msgctxt "@label m for meter"
msgid "%1m"
msgstr ""

#: resources/qml/ActionPanel/PrintJobInformation.qml:157
msgctxt "@label g for grams"
msgid "%1g"
msgstr ""

#: resources/qml/ActionPanel/SliceProcessWidget.qml:54
msgctxt "@label:PrintjobStatus"
msgid "Slicing..."
msgstr "Viipaloidaan..."

#: resources/qml/ActionPanel/SliceProcessWidget.qml:78
msgctxt "@label:PrintjobStatus"
msgid "Unable to slice"
msgstr ""

#: resources/qml/ActionPanel/SliceProcessWidget.qml:114
msgctxt "@button"
msgid "Processing"
msgstr ""

#: resources/qml/ActionPanel/SliceProcessWidget.qml:114
msgctxt "@button"
msgid "Slice"
msgstr ""

#: resources/qml/ActionPanel/SliceProcessWidget.qml:115
msgctxt "@label"
msgid "Start the slicing process"
msgstr ""

#: resources/qml/ActionPanel/SliceProcessWidget.qml:132
msgctxt "@button"
msgid "Cancel"
msgstr ""

#: resources/qml/Actions.qml:81
msgctxt "@action:inmenu"
msgid "Show Online Troubleshooting"
msgstr ""

#: resources/qml/Actions.qml:88
msgctxt "@action:inmenu"
msgid "Toggle Full Screen"
msgstr "Vaihda koko näyttöön"

#: resources/qml/Actions.qml:96
msgctxt "@action:inmenu"
msgid "Exit Full Screen"
msgstr ""

#: resources/qml/Actions.qml:103
msgctxt "@action:inmenu menubar:edit"
msgid "&Undo"
msgstr "&Kumoa"

#: resources/qml/Actions.qml:113
msgctxt "@action:inmenu menubar:edit"
msgid "&Redo"
msgstr "Tee &uudelleen"

#: resources/qml/Actions.qml:131
msgctxt "@action:inmenu menubar:file"
msgid "&Quit"
msgstr "&Lopeta"

#: resources/qml/Actions.qml:139
msgctxt "@action:inmenu menubar:view"
msgid "3D View"
msgstr ""

#: resources/qml/Actions.qml:146
msgctxt "@action:inmenu menubar:view"
msgid "Front View"
msgstr ""

#: resources/qml/Actions.qml:153
msgctxt "@action:inmenu menubar:view"
msgid "Top View"
msgstr ""

#: resources/qml/Actions.qml:160
msgctxt "@action:inmenu menubar:view"
msgid "Bottom View"
msgstr ""

#: resources/qml/Actions.qml:167
msgctxt "@action:inmenu menubar:view"
msgid "Left Side View"
msgstr ""

#: resources/qml/Actions.qml:174
msgctxt "@action:inmenu menubar:view"
msgid "Right Side View"
msgstr ""

#: resources/qml/Actions.qml:188
msgctxt "@action:inmenu"
msgid "Configure Cura..."
msgstr "Määritä Curan asetukset..."

#: resources/qml/Actions.qml:197
msgctxt "@action:inmenu menubar:printer"
msgid "&Add Printer..."
msgstr "L&isää tulostin..."

#: resources/qml/Actions.qml:203
msgctxt "@action:inmenu menubar:printer"
msgid "Manage Pr&inters..."
msgstr "Tulostinten &hallinta..."

#: resources/qml/Actions.qml:210
msgctxt "@action:inmenu"
msgid "Manage Materials..."
msgstr "Hallitse materiaaleja..."

#: resources/qml/Actions.qml:218
msgctxt "@action:inmenu Marketplace is a brand name of UltiMaker's, so don't translate."
msgid "Add more materials from Marketplace"
msgstr ""

#: resources/qml/Actions.qml:225
msgctxt "@action:inmenu menubar:profile"
msgid "&Update profile with current settings/overrides"
msgstr "&Päivitä nykyiset asetukset tai ohitukset profiiliin"

#: resources/qml/Actions.qml:233
msgctxt "@action:inmenu menubar:profile"
msgid "&Discard current changes"
msgstr "&Hylkää tehdyt muutokset"

#: resources/qml/Actions.qml:245
msgctxt "@action:inmenu menubar:profile"
msgid "&Create profile from current settings/overrides..."
msgstr "&Luo profiili nykyisten asetusten tai ohitusten perusteella..."

#: resources/qml/Actions.qml:251
msgctxt "@action:inmenu menubar:profile"
msgid "Manage Profiles..."
msgstr "Profiilien hallinta..."

#: resources/qml/Actions.qml:259
msgctxt "@action:inmenu menubar:help"
msgid "Show Online &Documentation"
msgstr "Näytä sähköinen &dokumentaatio"

#: resources/qml/Actions.qml:267
msgctxt "@action:inmenu menubar:help"
msgid "Report a &Bug"
msgstr "Ilmoita &virheestä"

#: resources/qml/Actions.qml:275
msgctxt "@action:inmenu menubar:help"
msgid "What's New"
msgstr ""

#: resources/qml/Actions.qml:289
msgctxt "@action:inmenu menubar:help"
msgid "About..."
msgstr "Tietoja..."

#: resources/qml/Actions.qml:296
msgctxt "@action:inmenu menubar:edit"
msgid "Delete Selected"
msgstr ""

#: resources/qml/Actions.qml:306
msgctxt "@action:inmenu menubar:edit"
msgid "Center Selected"
msgstr ""

#: resources/qml/Actions.qml:315
msgctxt "@action:inmenu menubar:edit"
msgid "Multiply Selected"
msgstr ""

#: resources/qml/Actions.qml:324
msgctxt "@action:inmenu"
msgid "Delete Model"
msgstr "Poista malli"

#: resources/qml/Actions.qml:332
msgctxt "@action:inmenu"
msgid "Ce&nter Model on Platform"
msgstr "Ke&skitä malli alustalle"

#: resources/qml/Actions.qml:338
msgctxt "@action:inmenu menubar:edit"
msgid "&Group Models"
msgstr "&Ryhmittele mallit"

#: resources/qml/Actions.qml:358
msgctxt "@action:inmenu menubar:edit"
msgid "Ungroup Models"
msgstr "Poista mallien ryhmitys"

#: resources/qml/Actions.qml:368
msgctxt "@action:inmenu menubar:edit"
msgid "&Merge Models"
msgstr "&Yhdistä mallit"

#: resources/qml/Actions.qml:378
msgctxt "@action:inmenu"
msgid "&Multiply Model..."
msgstr "&Kerro malli..."

#: resources/qml/Actions.qml:385
msgctxt "@action:inmenu menubar:edit"
msgid "Select All Models"
msgstr "Valitse kaikki mallit"

#: resources/qml/Actions.qml:395
msgctxt "@action:inmenu menubar:edit"
msgid "Clear Build Plate"
msgstr "Tyhjennä tulostusalusta"

#: resources/qml/Actions.qml:405
msgctxt "@action:inmenu menubar:file"
msgid "Reload All Models"
msgstr "Lataa kaikki mallit uudelleen"

#: resources/qml/Actions.qml:414
msgctxt "@action:inmenu menubar:edit"
msgid "Arrange All Models"
msgstr "Järjestä kaikki mallit"

#: resources/qml/Actions.qml:422
msgctxt "@action:inmenu menubar:edit"
msgid "Arrange Selection"
msgstr "Järjestä valinta"

#: resources/qml/Actions.qml:429
msgctxt "@action:inmenu menubar:edit"
msgid "Reset All Model Positions"
msgstr "Määritä kaikkien mallien positiot uudelleen"

#: resources/qml/Actions.qml:436
msgctxt "@action:inmenu menubar:edit"
msgid "Reset All Model Transformations"
msgstr "Määritä kaikkien mallien muutokset uudelleen"

#: resources/qml/Actions.qml:445
msgctxt "@action:inmenu menubar:file"
msgid "&Open File(s)..."
msgstr "&Avaa tiedosto(t)..."

#: resources/qml/Actions.qml:455
msgctxt "@action:inmenu menubar:file"
msgid "&New Project..."
msgstr "&Uusi projekti..."

#: resources/qml/Actions.qml:462
msgctxt "@action:inmenu menubar:help"
msgid "Show Configuration Folder"
msgstr "Näytä määrityskansio"

#: resources/qml/Actions.qml:469 resources/qml/Settings/SettingView.qml:476
msgctxt "@action:menu"
msgid "Configure setting visibility..."
msgstr "Määritä asetusten näkyvyys..."

#: resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:32
msgctxt "@label:button"
msgid "My printers"
msgstr ""

#: resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:34
msgctxt "@tooltip:button"
msgid "Monitor printers in Ultimaker Digital Factory."
msgstr ""

#: resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:41
msgctxt "@tooltip:button"
msgid "Create print projects in Digital Library."
msgstr ""

#: resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:46
msgctxt "@label:button"
msgid "Print jobs"
msgstr ""

#: resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:48
msgctxt "@tooltip:button"
msgid "Monitor print jobs and reprint from your print history."
msgstr ""

#: resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:55
msgctxt "@tooltip:button"
msgid "Extend UltiMaker Cura with plugins and material profiles."
msgstr ""

#: resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:62
msgctxt "@tooltip:button"
msgid "Become a 3D printing expert with UltiMaker e-learning."
msgstr ""

#: resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:67
msgctxt "@label:button"
msgid "UltiMaker support"
msgstr ""

#: resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:69
msgctxt "@tooltip:button"
msgid "Learn how to get started with UltiMaker Cura."
msgstr ""

#: resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:74
msgctxt "@label:button"
msgid "Ask a question"
msgstr ""

#: resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:76
msgctxt "@tooltip:button"
msgid "Consult the UltiMaker Community."
msgstr ""

#: resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:81
msgctxt "@label:button"
msgid "Report a bug"
msgstr ""

#: resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:83
msgctxt "@tooltip:button"
msgid "Let developers know that something is going wrong."
msgstr ""

#: resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:90
msgctxt "@tooltip:button"
msgid "Visit the UltiMaker website."
msgstr ""

#: resources/qml/ColorDialog.qml:110
msgctxt "@label"
msgid "Hex"
msgstr ""

#: resources/qml/Cura.qml:256
msgctxt "@label"
msgid "This package will be installed after restarting."
msgstr ""

#: resources/qml/Cura.qml:467 resources/qml/Preferences/GeneralPage.qml:14
msgctxt "@title:tab"
msgid "General"
msgstr "Yleiset"

#: resources/qml/Cura.qml:470
msgctxt "@title:tab"
msgid "Settings"
msgstr "Asetukset"

#: resources/qml/Cura.qml:472 resources/qml/Preferences/MachinesPage.qml:17
msgctxt "@title:tab"
msgid "Printers"
msgstr "Tulostimet"

#: resources/qml/Cura.qml:474
#: resources/qml/Preferences/Materials/MaterialsPage.qml:70
msgctxt "@title:tab"
msgid "Materials"
msgstr "Materiaalit"

#: resources/qml/Cura.qml:476 resources/qml/Preferences/ProfilesPage.qml:57
msgctxt "@title:tab"
msgid "Profiles"
msgstr "Profiilit"

#: resources/qml/Cura.qml:581
msgctxt "@title:window %1 is the application name"
msgid "Closing %1"
msgstr ""

#: resources/qml/Cura.qml:582 resources/qml/Cura.qml:591
msgctxt "@label %1 is the application name"
msgid "Are you sure you want to exit %1?"
msgstr ""

#: resources/qml/Cura.qml:629
#: resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:16
msgctxt "@title:window"
msgid "Open file(s)"
msgstr "Avaa tiedosto(t)"

#: resources/qml/Cura.qml:734
msgctxt "@window:title"
msgid "Install Package"
msgstr ""

#: resources/qml/Cura.qml:741
msgctxt "@title:window"
msgid "Open File(s)"
msgstr "Avaa tiedosto(t)"

#: resources/qml/Cura.qml:743
msgctxt "@text:window"
msgid "We have found one or more G-Code files within the files you have selected. You can only open one G-Code file at a time. If you want to open a G-Code file, please just select only one."
msgstr "Löysimme vähintään yhden Gcode-tiedoston valitsemiesi tiedostojen joukosta. Voit avata vain yhden Gcode-tiedoston kerrallaan. Jos haluat avata Gcode-tiedoston, valitse vain yksi."

#: resources/qml/Cura.qml:828
msgctxt "@title:window"
msgid "Add Printer"
msgstr "Lisää tulostin"

#: resources/qml/Cura.qml:836
msgctxt "@title:window"
msgid "What's New"
msgstr ""

#: resources/qml/Cura.qml:890
msgctxt "@title:window"
msgid "Save Custom Profile"
msgstr ""

#: resources/qml/Cura.qml:891
msgctxt "@textfield:placeholder"
msgid "New Custom Profile"
msgstr ""

#: resources/qml/Cura.qml:892
msgctxt "@info"
msgid "Custom profile name:"
msgstr ""

#: resources/qml/Cura.qml:909
msgctxt "@label %i will be replaced with a profile name"
msgid "<b>Only user changed settings will be saved in the custom profile.</b><br/>For materials that support it, the new custom profile will inherit properties from <b>%1</b>."
msgstr ""

#: resources/qml/Cura.qml:917
msgctxt "@action:button"
msgid "Learn more about Cura print profiles"
msgstr ""

#: resources/qml/Cura.qml:926
msgctxt "@button"
msgid "Save new profile"
msgstr ""

#: resources/qml/Dialogs/AboutDialog.qml:15
msgctxt "@title:window The argument is the application name."
msgid "About %1"
msgstr ""

#: resources/qml/Dialogs/AboutDialog.qml:59
msgctxt "@label"
msgid "version: %1"
msgstr ""

#: resources/qml/Dialogs/AboutDialog.qml:74
msgctxt "@label"
msgid "End-to-end solution for fused filament 3D printing."
msgstr "Kokonaisvaltainen sulatettavan tulostuslangan 3D-tulostusratkaisu."

#: resources/qml/Dialogs/AboutDialog.qml:87
msgctxt "@info:credit"
msgid ""
"Cura is developed by UltiMaker in cooperation with the community.\n"
"Cura proudly uses the following open source projects:"
msgstr ""
"Cura-ohjelman on kehittänyt Ultimaker B.V. yhteistyössä käyttäjäyhteisön kanssa.\n"
"Cura hyödyntää seuraavia avoimeen lähdekoodiin perustuvia projekteja:"

#: resources/qml/Dialogs/AboutDialog.qml:138
msgctxt "@label Description for application component"
msgid "Graphical user interface"
msgstr "Graafinen käyttöliittymä"

#: resources/qml/Dialogs/AboutDialog.qml:139
msgctxt "@label Description for application component"
msgid "Application framework"
msgstr "Sovelluskehys"

#: resources/qml/Dialogs/AboutDialog.qml:140
msgctxt "@label Description for application component"
msgid "G-code generator"
msgstr ""

#: resources/qml/Dialogs/AboutDialog.qml:141
msgctxt "@label Description for application component"
msgid "Interprocess communication library"
msgstr "Prosessien välinen tietoliikennekirjasto"

#: resources/qml/Dialogs/AboutDialog.qml:142
msgctxt "@label Description for application component"
msgid "Python bindings for libnest2d"
msgstr ""

#: resources/qml/Dialogs/AboutDialog.qml:143
msgctxt "@label Description for application component"
msgid "Polygon packing library, developed by Prusa Research"
msgstr ""

#: resources/qml/Dialogs/AboutDialog.qml:144
msgctxt "@label Description for application component"
msgid "Support library for handling 3MF files"
msgstr "Tukikirjasto 3MF-tiedostojen käsittelyyn"

#: resources/qml/Dialogs/AboutDialog.qml:145
msgctxt "@label Description for application component"
msgid "Support library for file metadata and streaming"
msgstr ""

#: resources/qml/Dialogs/AboutDialog.qml:148
msgctxt "@label Description for application dependency"
msgid "Programming language"
msgstr "Ohjelmointikieli"

#: resources/qml/Dialogs/AboutDialog.qml:149
msgctxt "@label Description for application dependency"
msgid "GUI framework"
msgstr "GUI-kehys"

#: resources/qml/Dialogs/AboutDialog.qml:150
msgctxt "@label Description for application dependency"
msgid "GUI framework bindings"
msgstr "GUI-kehyksen sidonnat"

#: resources/qml/Dialogs/AboutDialog.qml:151
msgctxt "@label Description for application dependency"
msgid "C/C++ Binding library"
msgstr "C/C++ -sidontakirjasto"

#: resources/qml/Dialogs/AboutDialog.qml:152
msgctxt "@label Description for application dependency"
msgid "Data interchange format"
msgstr "Data Interchange Format"

#: resources/qml/Dialogs/AboutDialog.qml:153
msgctxt "@label"
msgid "Font"
msgstr "Fontti"

#: resources/qml/Dialogs/AboutDialog.qml:156
msgctxt "@label Description for application dependency"
msgid "Polygon clipping library"
msgstr "Monikulmion leikkauskirjasto"

#: resources/qml/Dialogs/AboutDialog.qml:157
msgctxt "@label Description for application dependency"
msgid "JSON parser"
msgstr ""

#: resources/qml/Dialogs/AboutDialog.qml:158
msgctxt "@label Description for application dependency"
msgid "Utility functions, including an image loader"
msgstr ""

#: resources/qml/Dialogs/AboutDialog.qml:159
msgctxt "@label Description for application dependency"
msgid "Utility library, including Voronoi generation"
msgstr ""

#: resources/qml/Dialogs/AboutDialog.qml:162
#: resources/qml/Dialogs/AboutDialog.qml:163
msgctxt "@label Description for application dependency"
msgid "Root Certificates for validating SSL trustworthiness"
msgstr ""

#: resources/qml/Dialogs/AboutDialog.qml:164
msgctxt "@label Description for application dependency"
msgid "Compatibility between Python 2 and 3"
msgstr ""

#: resources/qml/Dialogs/AboutDialog.qml:165
msgctxt "@label Description for application dependency"
msgid "Support library for system keyring access"
msgstr ""

#: resources/qml/Dialogs/AboutDialog.qml:166
msgctxt "@label Description for application dependency"
msgid "Support library for faster math"
msgstr "Nopeamman laskennan tukikirjasto"

#: resources/qml/Dialogs/AboutDialog.qml:167
msgctxt "@label Description for application dependency"
msgid "Support library for handling STL files"
msgstr "STL-tiedostojen käsittelyn tukikirjasto"

#: resources/qml/Dialogs/AboutDialog.qml:168
msgctxt "@label Description for application dependency"
msgid "Python bindings for Clipper"
msgstr ""

#: resources/qml/Dialogs/AboutDialog.qml:169
msgctxt "@label Description for application dependency"
msgid "Serial communication library"
msgstr "Sarjatietoliikennekirjasto"

#: resources/qml/Dialogs/AboutDialog.qml:170
msgctxt "@label Description for application dependency"
msgid "Support library for scientific computing"
msgstr "Tieteellisen laskennan tukikirjasto"

#: resources/qml/Dialogs/AboutDialog.qml:171
msgctxt "@Label Description for application dependency"
msgid "Python Error tracking library"
msgstr ""

#: resources/qml/Dialogs/AboutDialog.qml:172
msgctxt "@label Description for application dependency"
msgid "Support library for handling triangular meshes"
msgstr ""

#: resources/qml/Dialogs/AboutDialog.qml:173
msgctxt "@label Description for application dependency"
msgid "ZeroConf discovery library"
msgstr "ZeroConf-etsintäkirjasto"

#: resources/qml/Dialogs/AboutDialog.qml:176
msgctxt "@label Description for development tool"
msgid "Universal build system configuration"
msgstr ""

#: resources/qml/Dialogs/AboutDialog.qml:177
msgctxt "@label Description for development tool"
msgid "Dependency and package manager"
msgstr ""

#: resources/qml/Dialogs/AboutDialog.qml:178
msgctxt "@label Description for development tool"
msgid "Packaging Python-applications"
msgstr ""

#: resources/qml/Dialogs/AboutDialog.qml:179
msgctxt "@label Description for development tool"
msgid "Linux cross-distribution application deployment"
msgstr ""

#: resources/qml/Dialogs/AboutDialog.qml:180
msgctxt "@label Description for development tool"
msgid "Generating Windows installers"
msgstr ""

#: resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:17
msgctxt "@title:window"
msgid "Open project file"
msgstr "Avaa projektitiedosto"

#: resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:84
msgctxt "@text:window"
msgid "This is a Cura project file. Would you like to open it as a project or import the models from it?"
msgstr "Tämä on Cura-projektitiedosto. Haluatko avata sen projektina vai tuoda siinä olevat mallit?"

#: resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:91
msgctxt "@text:window"
msgid "Remember my choice"
msgstr "Muista valintani"

#: resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:105
msgctxt "@action:button"
msgid "Open as project"
msgstr "Avaa projektina"

#: resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:110
msgctxt "@action:button"
msgid "Import models"
msgstr "Tuo mallit"

#: resources/qml/Dialogs/ChoosePrinterDialog.qml:17
msgctxt "@title:window"
msgid "Select Printer"
msgstr ""

#: resources/qml/Dialogs/ChoosePrinterDialog.qml:54
msgctxt "@title:label"
msgid "Compatible Printers"
msgstr ""

#: resources/qml/Dialogs/ChoosePrinterDialog.qml:110
msgctxt "@description"
msgid "No compatible printers, that are currently online, were found."
msgstr ""

#: resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:13
msgctxt "@title:window"
msgid "Discard or Keep changes"
msgstr "Hylkää tai säilytä muutokset"

#: resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:64
msgctxt "@text:window, %1 is a profile name"
msgid "You have customized some profile settings. Would you like to Keep these changed settings after switching profiles? Alternatively, you can discard the changes to load the defaults from '%1'."
msgstr ""

#: resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:90
msgctxt "@title:column"
msgid "Profile settings"
msgstr "Profiilin asetukset"

#: resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:92
msgctxt "@title:column"
msgid "Current changes"
msgstr ""

#: resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:123
#: resources/qml/Preferences/GeneralPage.qml:820
msgctxt "@option:discardOrKeep"
msgid "Always ask me this"
msgstr "Kysy aina"

#: resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:124
msgctxt "@option:discardOrKeep"
msgid "Discard and never ask again"
msgstr "Hylkää äläkä kysy uudelleen"

#: resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:125
msgctxt "@option:discardOrKeep"
msgid "Keep and never ask again"
msgstr "Säilytä äläkä kysy uudelleen"

#: resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:157
msgctxt "@action:button"
msgid "Discard changes"
msgstr ""

#: resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:164
msgctxt "@action:button"
msgid "Keep changes"
msgstr ""

#: resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:171
msgctxt "@action:button"
msgid "Save as new custom profile"
msgstr ""

#: resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:178
msgctxt "@action:button"
msgid "Save changes"
msgstr ""

#: resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:47
msgctxt "@text:window"
msgid "We have found one or more project file(s) within the files you have selected. You can open only one project file at a time. We suggest to only import models from those files. Would you like to proceed?"
msgstr "Löysimme vähintään yhden projektitiedoston valitsemiesi tiedostojen joukosta. Voit avata vain yhden projektitiedoston kerrallaan. Suosittelemme, että tuot vain malleja niistä tiedostoista. Haluatko jatkaa?"

#: resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:64
msgctxt "@action:button"
msgid "Import all as models"
msgstr "Tuo kaikki malleina"

#: resources/qml/Dialogs/RenameDialog.qml:23
msgctxt "@title:window"
msgid "Rename"
msgstr ""

#: resources/qml/Dialogs/RenameDialog.qml:24
msgctxt "@info"
msgid "Please provide a new name."
msgstr ""

#: resources/qml/Dialogs/WorkspaceSummaryDialog.qml:14
msgctxt "@title:window"
msgid "Save Project"
msgstr "Tallenna projekti"

#: resources/qml/Dialogs/WorkspaceSummaryDialog.qml:177
msgctxt "@action:label"
msgid "Extruder %1"
msgstr "Suulake %1"

#: resources/qml/Dialogs/WorkspaceSummaryDialog.qml:193
msgctxt "@action:label"
msgid "%1 & material"
msgstr "%1 & materiaali"

#: resources/qml/Dialogs/WorkspaceSummaryDialog.qml:195
msgctxt "@action:label"
msgid "Material"
msgstr ""

#: resources/qml/Dialogs/WorkspaceSummaryDialog.qml:284
msgctxt "@action:label"
msgid "Don't show project summary on save again"
msgstr "Älä näytä projektin yhteenvetoa tallennettaessa"

#: resources/qml/Dialogs/WorkspaceSummaryDialog.qml:298
msgctxt "@action:button"
msgid "Save"
msgstr "Tallenna"

#: resources/qml/JobSpecs.qml:93
msgctxt "@text Print job name"
msgid "Untitled"
msgstr ""

#: resources/qml/MainWindow/ApplicationMenu.qml:63
#: resources/qml/Menus/SettingsMenu.qml:13
msgctxt "@title:menu menubar:toplevel"
msgid "&Settings"
msgstr ""

#: resources/qml/MainWindow/ApplicationMenu.qml:87
msgctxt "@title:window"
msgid "New project"
msgstr "Uusi projekti"

#: resources/qml/MainWindow/ApplicationMenu.qml:88
msgctxt "@info:question"
msgid "Are you sure you want to start a new project? This will clear the build plate and any unsaved settings."
msgstr "Haluatko varmasti aloittaa uuden projektin? Se tyhjentää alustan ja kaikki tallentamattomat asetukset."

#: resources/qml/MainWindow/MainWindowHeader.qml:135
msgctxt "@action:button"
msgid "Marketplace"
msgstr ""

#: resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18
msgctxt "@header"
msgid "Configurations"
msgstr ""

#: resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137
msgctxt "@label"
msgid "This configuration is not available because %1 is not recognized. Please visit %2 to download the correct material profile."
msgstr ""

#: resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138
msgctxt "@label"
msgid "Marketplace"
msgstr ""

#: resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:52
msgctxt "@label"
msgid "Loading available configurations from the printer..."
msgstr ""

#: resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:53
msgctxt "@label"
msgid "The configurations are not available because the printer is disconnected."
msgstr ""

#: resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:106
msgctxt "@tooltip"
msgid "The configuration of this extruder is not allowed, and prohibits slicing."
msgstr ""

#: resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:110
msgctxt "@tooltip"
msgid "There are no profiles matching the configuration of this extruder."
msgstr ""

#: resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:250
msgctxt "@label"
msgid "Select configuration"
msgstr ""

#: resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:358
msgctxt "@label"
msgid "Configurations"
msgstr ""

#: resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:27
msgctxt "@header"
msgid "Custom"
msgstr ""

#: resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:173
msgctxt "@label"
msgid "Enabled"
msgstr ""

#: resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:222
msgctxt "@label"
msgid "Material"
msgstr "Materiaali"

#: resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:348
msgctxt "@label"
msgid "Use glue for better adhesion with this material combination."
msgstr ""

#: resources/qml/Menus/ContextMenu.qml:29
msgctxt "@label"
msgid "Print Selected Model With:"
msgid_plural "Print Selected Models With:"
msgstr[0] "Tulosta valittu malli asetuksella:"
msgstr[1] "Tulosta valitut mallit asetuksella:"

#: resources/qml/Menus/ContextMenu.qml:103
msgctxt "@title:window"
msgid "Multiply Selected Model"
msgid_plural "Multiply Selected Models"
msgstr[0] "Kerro valittu malli"
msgstr[1] "Kerro valitut mallit"

#: resources/qml/Menus/ContextMenu.qml:134
msgctxt "@label"
msgid "Number of Copies"
msgstr "Kopioiden määrä"

#: resources/qml/Menus/EditMenu.qml:12
msgctxt "@title:menu menubar:toplevel"
msgid "&Edit"
msgstr "&Muokkaa"

#: resources/qml/Menus/ExtensionMenu.qml:13
msgctxt "@title:menu menubar:toplevel"
msgid "E&xtensions"
msgstr "Laa&jennukset"

#: resources/qml/Menus/FileMenu.qml:13
msgctxt "@title:menu menubar:toplevel"
msgid "&File"
msgstr "Tie&dosto"

#: resources/qml/Menus/FileMenu.qml:45
msgctxt "@title:menu menubar:file"
msgid "&Save Project..."
msgstr ""

#: resources/qml/Menus/FileMenu.qml:78
msgctxt "@title:menu menubar:file"
msgid "&Export..."
msgstr ""

#: resources/qml/Menus/FileMenu.qml:89
msgctxt "@action:inmenu menubar:file"
msgid "Export Selection..."
msgstr ""

#: resources/qml/Menus/HelpMenu.qml:14
msgctxt "@title:menu menubar:toplevel"
msgid "&Help"
msgstr "&Ohje"

#: resources/qml/Menus/MaterialMenu.qml:13
msgctxt "@label:category menu label"
msgid "Material"
msgstr ""

#: resources/qml/Menus/MaterialMenu.qml:53
msgctxt "@label:category menu label"
msgid "Favorites"
msgstr ""

#: resources/qml/Menus/MaterialMenu.qml:78
msgctxt "@label:category menu label"
msgid "Generic"
msgstr ""

#: resources/qml/Menus/OpenFilesMenu.qml:15
msgctxt "@title:menu menubar:file"
msgid "Open File(s)..."
msgstr ""

#: resources/qml/Menus/PreferencesMenu.qml:21
msgctxt "@title:menu menubar:toplevel"
msgid "P&references"
msgstr "L&isäasetukset"

#: resources/qml/Menus/PrinterMenu.qml:13
msgctxt "@title:menu menubar:settings"
msgid "&Printer"
msgstr "&Tulostin"

#: resources/qml/Menus/PrinterMenu.qml:17
msgctxt "@label:category menu label"
msgid "Network enabled printers"
msgstr ""

#: resources/qml/Menus/PrinterMenu.qml:50
msgctxt "@label:category menu label"
msgid "Local printers"
msgstr ""

#: resources/qml/Menus/RecentFilesMenu.qml:15
msgctxt "@title:menu menubar:file"
msgid "Open &Recent"
msgstr "Avaa &viimeisin"

#: resources/qml/Menus/SaveProjectMenu.qml:15
msgctxt "@title:menu menubar:file"
msgid "Save Project..."
msgstr ""

#: resources/qml/Menus/SettingVisibilityPresetsMenu.qml:16
msgctxt "@action:inmenu"
msgid "Visible Settings"
msgstr ""

#: resources/qml/Menus/SettingVisibilityPresetsMenu.qml:42
msgctxt "@action:inmenu"
msgid "Collapse All Categories"
msgstr ""

#: resources/qml/Menus/SettingVisibilityPresetsMenu.qml:51
msgctxt "@action:inmenu"
msgid "Manage Setting Visibility..."
msgstr ""

#: resources/qml/Menus/SettingsMenu.qml:34
msgctxt "@title:menu"
msgid "&Material"
msgstr "&Materiaali"

#: resources/qml/Menus/SettingsMenu.qml:49
msgctxt "@action:inmenu"
msgid "Set as Active Extruder"
msgstr "Aseta aktiiviseksi suulakepuristimeksi"

#: resources/qml/Menus/SettingsMenu.qml:55
msgctxt "@action:inmenu"
msgid "Enable Extruder"
msgstr ""

#: resources/qml/Menus/SettingsMenu.qml:63
msgctxt "@action:inmenu"
msgid "Disable Extruder"
msgstr ""

#: resources/qml/Menus/ViewMenu.qml:13
msgctxt "@title:menu menubar:toplevel"
msgid "&View"
msgstr "&Näytä"

#: resources/qml/Menus/ViewMenu.qml:17
msgctxt "@action:inmenu menubar:view"
msgid "&Camera position"
msgstr ""

#: resources/qml/Menus/ViewMenu.qml:30
msgctxt "@action:inmenu menubar:view"
msgid "Camera view"
msgstr ""

#: resources/qml/Menus/ViewMenu.qml:48
msgctxt "@action:inmenu menubar:view"
msgid "Perspective"
msgstr ""

#: resources/qml/Menus/ViewMenu.qml:59
msgctxt "@action:inmenu menubar:view"
msgid "Orthographic"
msgstr ""

#: resources/qml/MonitorButton.qml:115
msgctxt "@label:MonitorStatus"
msgid "Not connected to a printer"
msgstr "Ei yhteyttä tulostimeen"

#: resources/qml/MonitorButton.qml:119
msgctxt "@label:MonitorStatus"
msgid "Printer does not accept commands"
msgstr "Tulostin ei hyväksy komentoja"

#: resources/qml/MonitorButton.qml:129
msgctxt "@label:MonitorStatus"
msgid "In maintenance. Please check the printer"
msgstr "Huolletaan. Tarkista tulostin"

#: resources/qml/MonitorButton.qml:140
msgctxt "@label:MonitorStatus"
msgid "Lost connection with the printer"
msgstr "Yhteys tulostimeen menetetty"

#: resources/qml/MonitorButton.qml:142
msgctxt "@label:MonitorStatus"
msgid "Printing..."
msgstr "Tulostetaan..."

#: resources/qml/MonitorButton.qml:145
msgctxt "@label:MonitorStatus"
msgid "Paused"
msgstr "Keskeytetty"

#: resources/qml/MonitorButton.qml:148
msgctxt "@label:MonitorStatus"
msgid "Preparing..."
msgstr "Valmistellaan..."

#: resources/qml/MonitorButton.qml:150
msgctxt "@label:MonitorStatus"
msgid "Please remove the print"
msgstr "Poista tuloste"

#: resources/qml/MonitorButton.qml:318
msgctxt "@label"
msgid "Abort Print"
msgstr ""

#: resources/qml/MonitorButton.qml:327
msgctxt "@label"
msgid "Are you sure you want to abort the print?"
msgstr "Haluatko varmasti keskeyttää tulostuksen?"

#: resources/qml/ObjectItemButton.qml:109
msgctxt "@label"
msgid "Is printed as support."
msgstr ""

#: resources/qml/ObjectItemButton.qml:112
msgctxt "@label"
msgid "Other models overlapping with this model are modified."
msgstr ""

#: resources/qml/ObjectItemButton.qml:115
msgctxt "@label"
msgid "Infill overlapping with this model is modified."
msgstr ""

#: resources/qml/ObjectItemButton.qml:118
msgctxt "@label"
msgid "Overlaps with this model are not supported."
msgstr ""

#: resources/qml/ObjectItemButton.qml:125
msgctxt "@label %1 is the number of settings it overrides."
msgid "Overrides %1 setting."
msgid_plural "Overrides %1 settings."
msgstr[0] ""
msgstr[1] ""

#: resources/qml/ObjectSelector.qml:59
msgctxt "@label"
msgid "Object list"
msgstr ""

#: resources/qml/Preferences/GeneralPage.qml:134
#: resources/qml/Preferences/SettingVisibilityPage.qml:24
msgctxt "@action:button"
msgid "Defaults"
msgstr ""

#: resources/qml/Preferences/GeneralPage.qml:172
msgctxt "@label"
msgid "Interface"
msgstr "Käyttöliittymä"

#: resources/qml/Preferences/GeneralPage.qml:215
msgctxt "@heading"
msgid "-- incomplete --"
msgstr ""

#: resources/qml/Preferences/GeneralPage.qml:261
msgctxt "@label"
msgid "Currency:"
msgstr "Valuutta:"

#: resources/qml/Preferences/GeneralPage.qml:277
msgctxt "@label: Please keep the asterix, it's to indicate that a restart is needed."
msgid "Theme*:"
msgstr ""

#: resources/qml/Preferences/GeneralPage.qml:323
msgctxt "@info:tooltip"
msgid "Slice automatically when changing settings."
msgstr "Viipaloi automaattisesti, kun asetuksia muutetaan."

#: resources/qml/Preferences/GeneralPage.qml:331
msgctxt "@option:check"
msgid "Slice automatically"
msgstr "Viipaloi automaattisesti"

#: resources/qml/Preferences/GeneralPage.qml:340
msgctxt "@info:tooltip"
msgid "Show an icon and notifications in the system notification area."
msgstr ""

#: resources/qml/Preferences/GeneralPage.qml:348
msgctxt "@option:check"
msgid "Add icon to system tray *"
msgstr ""

#: resources/qml/Preferences/GeneralPage.qml:357
msgctxt "@label"
msgid "*You will need to restart the application for these changes to have effect."
msgstr ""

#: resources/qml/Preferences/GeneralPage.qml:373
msgctxt "@label"
msgid "Viewport behavior"
msgstr "Näyttöikkunan käyttäytyminen"

#: resources/qml/Preferences/GeneralPage.qml:381
msgctxt "@info:tooltip"
msgid "Highlight unsupported areas of the model in red. Without support these areas will not print properly."
msgstr "Korosta mallin vailla tukea olevat alueet punaisella. Ilman tukea nämä alueet eivät tulostu kunnolla."

#: resources/qml/Preferences/GeneralPage.qml:390
msgctxt "@option:check"
msgid "Display overhang"
msgstr "Näytä uloke"

#: resources/qml/Preferences/GeneralPage.qml:400
msgctxt "@info:tooltip"
msgid "Highlight missing or extraneous surfaces of the model using warning signs. The toolpaths will often be missing parts of the intended geometry."
msgstr ""

#: resources/qml/Preferences/GeneralPage.qml:409
msgctxt "@option:check"
msgid "Display model errors"
msgstr ""

#: resources/qml/Preferences/GeneralPage.qml:417
msgctxt "@info:tooltip"
msgid "Moves the camera so the model is in the center of the view when a model is selected"
msgstr "Siirtää kameraa siten, että valittuna oleva malli on näkymän keskellä"

#: resources/qml/Preferences/GeneralPage.qml:422
msgctxt "@action:button"
msgid "Center camera when item is selected"
msgstr "Keskitä kamera kun kohde on valittu"

#: resources/qml/Preferences/GeneralPage.qml:432
msgctxt "@info:tooltip"
msgid "Should the default zoom behavior of cura be inverted?"
msgstr "Pitääkö Curan oletusarvoinen zoom-toimintatapa muuttaa päinvastaiseksi?"

#: resources/qml/Preferences/GeneralPage.qml:437
msgctxt "@action:button"
msgid "Invert the direction of camera zoom."
msgstr "Käännä kameran zoomin suunta päinvastaiseksi."

#: resources/qml/Preferences/GeneralPage.qml:453
msgctxt "@info:tooltip"
msgid "Should zooming move in the direction of the mouse?"
msgstr "Tuleeko zoomauksen siirtyä hiiren suuntaan?"

#: resources/qml/Preferences/GeneralPage.qml:453
msgctxt "@info:tooltip"
msgid "Zooming towards the mouse is not supported in the orthographic perspective."
msgstr ""

#: resources/qml/Preferences/GeneralPage.qml:458
msgctxt "@action:button"
msgid "Zoom toward mouse direction"
msgstr "Zoomaa hiiren suuntaan"

#: resources/qml/Preferences/GeneralPage.qml:484
msgctxt "@info:tooltip"
msgid "Should models on the platform be moved so that they no longer intersect?"
msgstr "Pitäisikö alustalla olevia malleja siirtää niin, etteivät ne enää leikkaa toisiaan?"

#: resources/qml/Preferences/GeneralPage.qml:489
msgctxt "@option:check"
msgid "Ensure models are kept apart"
msgstr "Varmista, että mallit ovat erillään"

#: resources/qml/Preferences/GeneralPage.qml:498
msgctxt "@info:tooltip"
msgid "Should models on the platform be moved down to touch the build plate?"
msgstr "Pitäisikö tulostusalueella olevia malleja siirtää alas niin, että ne koskettavat tulostusalustaa?"

#: resources/qml/Preferences/GeneralPage.qml:503
msgctxt "@option:check"
msgid "Automatically drop models to the build plate"
msgstr "Pudota mallit automaattisesti alustalle"

#: resources/qml/Preferences/GeneralPage.qml:515
msgctxt "@info:tooltip"
msgid "Show caution message in g-code reader."
msgstr ""

#: resources/qml/Preferences/GeneralPage.qml:524
msgctxt "@option:check"
msgid "Caution message in g-code reader"
msgstr ""

#: resources/qml/Preferences/GeneralPage.qml:532
msgctxt "@info:tooltip"
msgid "Should layer be forced into compatibility mode?"
msgstr "Pakotetaanko kerros yhteensopivuustilaan?"

#: resources/qml/Preferences/GeneralPage.qml:537
msgctxt "@option:check"
msgid "Force layer view compatibility mode (restart required)"
msgstr "Pakota kerrosnäkymän yhteensopivuustila (vaatii uudelleenkäynnistyksen)"

#: resources/qml/Preferences/GeneralPage.qml:547
msgctxt "@info:tooltip"
msgid "Should Cura open at the location it was closed?"
msgstr ""

#: resources/qml/Preferences/GeneralPage.qml:552
msgctxt "@option:check"
msgid "Restore window position on start"
msgstr ""

#: resources/qml/Preferences/GeneralPage.qml:562
msgctxt "@info:tooltip"
msgid "What type of camera rendering should be used?"
msgstr ""

#: resources/qml/Preferences/GeneralPage.qml:569
msgctxt "@window:text"
msgid "Camera rendering:"
msgstr ""

#: resources/qml/Preferences/GeneralPage.qml:576
msgid "Perspective"
msgstr ""

#: resources/qml/Preferences/GeneralPage.qml:577
msgid "Orthographic"
msgstr ""

#: resources/qml/Preferences/GeneralPage.qml:617
msgctxt "@label"
msgid "Opening and saving files"
msgstr "Tiedostojen avaaminen ja tallentaminen"

#: resources/qml/Preferences/GeneralPage.qml:624
msgctxt "@info:tooltip"
msgid "Should opening files from the desktop or external applications open in the same instance of Cura?"
msgstr ""

#: resources/qml/Preferences/GeneralPage.qml:629
msgctxt "@option:check"
msgid "Use a single instance of Cura"
msgstr ""

#: resources/qml/Preferences/GeneralPage.qml:640
msgctxt "@info:tooltip"
msgid "Should the build plate be cleared before loading a new model in the single instance of Cura?"
msgstr ""

#: resources/qml/Preferences/GeneralPage.qml:646
msgctxt "@option:check"
msgid "Clear buildplate before loading model into the single instance"
msgstr ""

#: resources/qml/Preferences/GeneralPage.qml:656
msgctxt "@info:tooltip"
msgid "Should models be scaled to the build volume if they are too large?"
msgstr "Pitäisikö mallit skaalata tulostustilavuuteen, jos ne ovat liian isoja?"

#: resources/qml/Preferences/GeneralPage.qml:661
msgctxt "@option:check"
msgid "Scale large models"
msgstr "Skaalaa suuret mallit"

#: resources/qml/Preferences/GeneralPage.qml:671
msgctxt "@info:tooltip"
msgid "An model may appear extremely small if its unit is for example in meters rather than millimeters. Should these models be scaled up?"
msgstr "Malli voi vaikuttaa erittäin pieneltä, jos sen koko on ilmoitettu esimerkiksi metreissä eikä millimetreissä. Pitäisikö nämä mallit suurentaa?"

#: resources/qml/Preferences/GeneralPage.qml:676
msgctxt "@option:check"
msgid "Scale extremely small models"
msgstr "Skaalaa erittäin pienet mallit"

#: resources/qml/Preferences/GeneralPage.qml:686
msgctxt "@info:tooltip"
msgid "Should models be selected after they are loaded?"
msgstr ""

#: resources/qml/Preferences/GeneralPage.qml:691
msgctxt "@option:check"
msgid "Select models when loaded"
msgstr ""

#: resources/qml/Preferences/GeneralPage.qml:701
msgctxt "@info:tooltip"
msgid "Should a prefix based on the printer name be added to the print job name automatically?"
msgstr "Pitäisikö tulostustyön nimeen lisätä automaattisesti tulostimen nimeen perustuva etuliite?"

#: resources/qml/Preferences/GeneralPage.qml:706
msgctxt "@option:check"
msgid "Add machine prefix to job name"
msgstr "Lisää laitteen etuliite työn nimeen"

#: resources/qml/Preferences/GeneralPage.qml:716
msgctxt "@info:tooltip"
msgid "Should a summary be shown when saving a project file?"
msgstr "Näytetäänkö yhteenveto, kun projektitiedosto tallennetaan?"

#: resources/qml/Preferences/GeneralPage.qml:720
msgctxt "@option:check"
msgid "Show summary dialog when saving project"
msgstr "Näytä yhteenvetoikkuna, kun projekti tallennetaan"

#: resources/qml/Preferences/GeneralPage.qml:730
msgctxt "@info:tooltip"
msgid "Default behavior when opening a project file"
msgstr "Projektitiedoston avaamisen oletustoimintatapa"

#: resources/qml/Preferences/GeneralPage.qml:738
msgctxt "@window:text"
msgid "Default behavior when opening a project file: "
msgstr "Projektitiedoston avaamisen oletustoimintatapa: "

#: resources/qml/Preferences/GeneralPage.qml:753
msgctxt "@option:openProject"
msgid "Always ask me this"
msgstr ""

#: resources/qml/Preferences/GeneralPage.qml:754
msgctxt "@option:openProject"
msgid "Always open as a project"
msgstr "Avaa aina projektina"

#: resources/qml/Preferences/GeneralPage.qml:755
msgctxt "@option:openProject"
msgid "Always import models"
msgstr "Tuo mallit aina"

#: resources/qml/Preferences/GeneralPage.qml:792
msgctxt "@info:tooltip"
msgid "When you have made changes to a profile and switched to a different one, a dialog will be shown asking whether you want to keep your modifications or not, or you can choose a default behaviour and never show that dialog again."
msgstr "Kun olet tehnyt muutokset profiiliin ja vaihtanut toiseen, näytetään valintaikkuna, jossa kysytään, haluatko säilyttää vai hylätä muutokset. Tässä voit myös valita oletuskäytöksen, jolloin valintaikkunaa ei näytetä uudelleen."

#: resources/qml/Preferences/GeneralPage.qml:801
#: resources/qml/PrintSetupSelector/Recommended/RecommendedPrintSetup.qml:46
msgctxt "@label"
msgid "Profiles"
msgstr ""

#: resources/qml/Preferences/GeneralPage.qml:806
msgctxt "@window:text"
msgid "Default behavior for changed setting values when switching to a different profile: "
msgstr ""

#: resources/qml/Preferences/GeneralPage.qml:821
msgctxt "@option:discardOrKeep"
msgid "Always discard changed settings"
msgstr ""

#: resources/qml/Preferences/GeneralPage.qml:822
msgctxt "@option:discardOrKeep"
msgid "Always transfer changed settings to new profile"
msgstr ""

#: resources/qml/Preferences/GeneralPage.qml:856
msgctxt "@label"
msgid "Privacy"
msgstr "Tietosuoja"

#: resources/qml/Preferences/GeneralPage.qml:862
msgctxt "@info:tooltip"
msgid "Should anonymous data about your print be sent to UltiMaker? Note, no models, IP addresses or other personally identifiable information is sent or stored."
msgstr "Pitäisikö anonyymejä tietoja tulosteesta lähettää UltiMakerille? Huomaa, että malleja, IP-osoitteita tai muita henkilökohtaisia tietoja ei lähetetä eikä tallenneta."

#: resources/qml/Preferences/GeneralPage.qml:867
msgctxt "@option:check"
msgid "Send (anonymous) print information"
msgstr "Lähetä (anonyymit) tulostustiedot"

#: resources/qml/Preferences/GeneralPage.qml:897
msgctxt "@label"
msgid "Updates"
msgstr ""

#: resources/qml/Preferences/GeneralPage.qml:904
msgctxt "@info:tooltip"
msgid "Should Cura check for updates when the program is started?"
msgstr "Pitäisikö Curan tarkistaa saatavilla olevat päivitykset, kun ohjelma käynnistetään?"

#: resources/qml/Preferences/GeneralPage.qml:909
msgctxt "@option:check"
msgid "Check for updates on start"
msgstr "Tarkista päivitykset käynnistettäessä"

#: resources/qml/Preferences/GeneralPage.qml:925
msgctxt "@info:tooltip"
msgid "When checking for updates, only check for stable releases."
msgstr ""

#: resources/qml/Preferences/GeneralPage.qml:931
msgctxt "@option:radio"
msgid "Stable releases only"
msgstr ""

#: resources/qml/Preferences/GeneralPage.qml:941
msgctxt "@info:tooltip"
msgid "When checking for updates, check for both stable and for beta releases."
msgstr ""

#: resources/qml/Preferences/GeneralPage.qml:947
msgctxt "@option:radio"
msgid "Stable and Beta releases"
msgstr ""

#: resources/qml/Preferences/GeneralPage.qml:957
msgctxt "@info:tooltip"
msgid "Should an automatic check for new plugins be done every time Cura is started? It is highly recommended that you do not disable this!"
msgstr ""

#: resources/qml/Preferences/GeneralPage.qml:962
msgctxt "@option:check"
msgid "Get notifications for plugin updates"
msgstr ""

#: resources/qml/Preferences/MachinesPage.qml:50
msgctxt "@action:button"
msgid "Add New"
msgstr ""

#: resources/qml/Preferences/MachinesPage.qml:147
#: resources/qml/Preferences/Materials/MaterialsPage.qml:160
#: resources/qml/Preferences/ProfilesPage.qml:294
msgctxt "@action:button"
msgid "Activate"
msgstr "Aktivoi"

#: resources/qml/Preferences/MachinesPage.qml:159
#: resources/qml/Preferences/ProfilesPage.qml:331
msgctxt "@action:button"
msgid "Rename"
msgstr "Nimeä uudelleen"

#: resources/qml/Preferences/Materials/MaterialsPage.qml:72
msgctxt "@label"
msgid "Materials compatible with active printer:"
msgstr ""

#: resources/qml/Preferences/Materials/MaterialsPage.qml:78
#: resources/qml/Preferences/ProfilesPage.qml:94
msgctxt "@action:button"
msgid "Create new"
msgstr ""

#: resources/qml/Preferences/Materials/MaterialsPage.qml:90
#: resources/qml/Preferences/ProfilesPage.qml:88
msgctxt "@action:button"
msgid "Import"
msgstr "Tuo"

#: resources/qml/Preferences/Materials/MaterialsPage.qml:101
msgctxt "@action:button"
msgid "Sync with Printers"
msgstr ""

#: resources/qml/Preferences/Materials/MaterialsPage.qml:174
#: resources/qml/Preferences/ProfilesPage.qml:311
msgctxt "@action:button"
msgid "Duplicate"
msgstr "Jäljennös"

#: resources/qml/Preferences/Materials/MaterialsPage.qml:198
#: resources/qml/Preferences/ProfilesPage.qml:342
msgctxt "@action:button"
msgid "Export"
msgstr "Vie"

#: resources/qml/Preferences/Materials/MaterialsPage.qml:212
#: resources/qml/Preferences/ProfilesPage.qml:392
msgctxt "@title:window"
msgid "Confirm Remove"
msgstr ""

#: resources/qml/Preferences/Materials/MaterialsPage.qml:215
#: resources/qml/Preferences/ProfilesPage.qml:393
msgctxt "@label (%1 is object name)"
msgid "Are you sure you wish to remove %1? This cannot be undone!"
msgstr ""

#: resources/qml/Preferences/Materials/MaterialsPage.qml:228
#: resources/qml/Preferences/Materials/MaterialsPage.qml:238
msgctxt "@title:window"
msgid "Import Material"
msgstr "Tuo materiaali"

#: resources/qml/Preferences/Materials/MaterialsPage.qml:242
msgctxt "@info:status Don't translate the XML tag <filename>!"
msgid "Successfully imported material <filename>%1</filename>"
msgstr "Materiaalin tuominen onnistui: <filename>%1</filename>"

#: resources/qml/Preferences/Materials/MaterialsPage.qml:245
msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
msgid "Could not import material <filename>%1</filename>: <message>%2</message>"
msgstr "Materiaalin tuominen epäonnistui: <filename>%1</filename>: <message>%2</message>"

#: resources/qml/Preferences/Materials/MaterialsPage.qml:256
#: resources/qml/Preferences/Materials/MaterialsPage.qml:267
msgctxt "@title:window"
msgid "Export Material"
msgstr "Vie materiaali"

#: resources/qml/Preferences/Materials/MaterialsPage.qml:272
msgctxt "@info:status Don't translate the XML tags <filename> and <message>!"
msgid "Failed to export material to <filename>%1</filename>: <message>%2</message>"
msgstr "Materiaalin vieminen epäonnistui kohteeseen <filename>%1</filename>: <message>%2</message>"

#: resources/qml/Preferences/Materials/MaterialsPage.qml:275
msgctxt "@info:status Don't translate the XML tag <filename>!"
msgid "Successfully exported material to <filename>%1</filename>"
msgstr "Materiaalin vieminen onnistui kohteeseen <filename>%1</filename>"

#: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:18
msgctxt "@title:window"
msgid "Sync materials with printers"
msgstr ""

#: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:49
msgctxt "@title:header"
msgid "Sync materials with printers"
msgstr ""

#: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:55
msgctxt "@text"
msgid "Following a few simple steps, you will be able to synchronize all your material profiles with your printers."
msgstr ""

#: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:77
msgctxt "@button"
msgid "Why do I need to sync material profiles?"
msgstr ""

#: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:86
msgctxt "@button"
msgid "Start"
msgstr ""

#: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:144
msgctxt "@title:header"
msgid "Sign in"
msgstr ""

#: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:150
msgctxt "@text"
msgid "To automatically sync the material profiles with all your printers connected to Digital Factory you need to be signed in in Cura."
msgstr ""

#: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:174
#: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:462
#: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:602
msgctxt "@button"
msgid "Sync materials with USB"
msgstr ""

#: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:207
msgctxt "@title:header"
msgid "The following printers will receive the new material profiles:"
msgstr ""

#: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:214
msgctxt "@title:header"
msgid "Something went wrong when sending the materials to the printers."
msgstr ""

#: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:221
msgctxt "@title:header"
msgid "Material profiles successfully synced with the following printers:"
msgstr ""

#: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:258
#: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:445
msgctxt "@button"
msgid "Troubleshooting"
msgstr ""

#: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:422
msgctxt "@text Asking the user whether printers are missing in a list."
msgid "Printers missing?"
msgstr ""

#: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:424
msgctxt "@text"
msgid "Make sure all your printers are turned ON and connected to Digital Factory."
msgstr ""

#: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:433
msgctxt "@button"
msgid "Refresh List"
msgstr ""

#: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:473
msgctxt "@button"
msgid "Try again"
msgstr ""

#: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:477
#: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:712
msgctxt "@button"
msgid "Done"
msgstr ""

#: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:479
#: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:622
msgctxt "@button"
msgid "Sync"
msgstr ""

#: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:535
msgctxt "@button"
msgid "Syncing"
msgstr ""

#: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:553
msgctxt "@title:header"
msgid "No printers found"
msgstr ""

#: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:574
msgctxt "@text"
msgid "It seems like you don't have any compatible printers connected to Digital Factory. Make sure your printer is connected and it's running the latest firmware."
msgstr ""

#: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:585
msgctxt "@button"
msgid "Learn how to connect your printer to Digital Factory"
msgstr ""

#: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:613
msgctxt "@button"
msgid "Refresh"
msgstr ""

#: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:642
msgctxt "@title:header"
msgid "Sync material profiles via USB"
msgstr ""

#: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:648
msgctxt "@text In the UI this is followed by a list of steps the user needs to take."
msgid "Follow the following steps to load the new material profiles to your printer."
msgstr ""

#: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:679
msgctxt "@text"
msgid "Click the export material archive button."
msgstr ""

#: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:680
msgctxt "@text"
msgid "Save the .umm file on a USB stick."
msgstr ""

#: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:681
msgctxt "@text"
msgid "Insert the USB stick into your printer and launch the procedure to load new material profiles."
msgstr ""

#: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:689
msgctxt "@button"
msgid "How to load new material profiles to my printer"
msgstr ""

#: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:703
#: resources/qml/WelcomePages/AddPrinterByIpContent.qml:299
msgctxt "@button"
msgid "Back"
msgstr ""

#: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:712
msgctxt "@button"
msgid "Export material archive"
msgstr ""

#: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:747
msgctxt "@title:window"
msgid "Export All Materials"
msgstr ""

#: resources/qml/Preferences/Materials/MaterialsView.qml:121
msgctxt "@title:window"
msgid "Confirm Diameter Change"
msgstr ""

#: resources/qml/Preferences/Materials/MaterialsView.qml:122
msgctxt "@label (%1 is a number)"
msgid "The new filament diameter is set to %1 mm, which is not compatible with the current extruder. Do you wish to continue?"
msgstr ""

#: resources/qml/Preferences/Materials/MaterialsView.qml:152
msgctxt "@label"
msgid "Display Name"
msgstr "Näytä nimi"

#: resources/qml/Preferences/Materials/MaterialsView.qml:171
msgctxt "@label"
msgid "Brand"
msgstr "Merkki"

#: resources/qml/Preferences/Materials/MaterialsView.qml:190
msgctxt "@label"
msgid "Material Type"
msgstr "Materiaalin tyyppi"

#: resources/qml/Preferences/Materials/MaterialsView.qml:210
msgctxt "@label"
msgid "Color"
msgstr "Väri"

#: resources/qml/Preferences/Materials/MaterialsView.qml:262
msgctxt "@title"
msgid "Material color picker"
msgstr ""

#: resources/qml/Preferences/Materials/MaterialsView.qml:275
msgctxt "@label"
msgid "Properties"
msgstr "Ominaisuudet"

#: resources/qml/Preferences/Materials/MaterialsView.qml:286
msgctxt "@label"
msgid "Density"
msgstr "Tiheys"

#: resources/qml/Preferences/Materials/MaterialsView.qml:319
msgctxt "@label"
msgid "Diameter"
msgstr "Läpimitta"

#: resources/qml/Preferences/Materials/MaterialsView.qml:369
msgctxt "@label"
msgid "Filament Cost"
msgstr "Tulostuslangan hinta"

#: resources/qml/Preferences/Materials/MaterialsView.qml:401
msgctxt "@label"
msgid "Filament weight"
msgstr "Tulostuslangan paino"

#: resources/qml/Preferences/Materials/MaterialsView.qml:433
msgctxt "@label"
msgid "Filament length"
msgstr "Tulostuslangan pituus"

#: resources/qml/Preferences/Materials/MaterialsView.qml:451
msgctxt "@label"
msgid "Cost per Meter"
msgstr "Hinta metriä kohden"

#: resources/qml/Preferences/Materials/MaterialsView.qml:465
msgctxt "@label"
msgid "This material is linked to %1 and shares some of its properties."
msgstr "Materiaali on linkitetty kohteeseen %1 ja niillä on joitain samoja ominaisuuksia."

#: resources/qml/Preferences/Materials/MaterialsView.qml:472
msgctxt "@label"
msgid "Unlink Material"
msgstr "Poista materiaalin linkitys"

#: resources/qml/Preferences/Materials/MaterialsView.qml:485
msgctxt "@label"
msgid "Description"
msgstr "Kuvaus"

#: resources/qml/Preferences/Materials/MaterialsView.qml:503
msgctxt "@label"
msgid "Adhesion Information"
msgstr "Tarttuvuustiedot"

#: resources/qml/Preferences/Materials/MaterialsView.qml:642
msgctxt "@title"
msgid "Information"
msgstr "Tiedot"

#: resources/qml/Preferences/Materials/MaterialsView.qml:647
#: resources/qml/PrintSetupSelector/PrintSetupSelector.qml:18
msgctxt "@label"
msgid "Print settings"
msgstr "Tulostusasetukset"

#: resources/qml/Preferences/ProfilesPage.qml:59
msgctxt "@label"
msgid "Profiles compatible with active printer:"
msgstr ""

#: resources/qml/Preferences/ProfilesPage.qml:98
msgctxt "@action:tooltip"
msgid "Create new profile from current settings/overrides"
msgstr ""

#: resources/qml/Preferences/ProfilesPage.qml:125
msgctxt "@action:label"
msgid "Some settings from current profile were overwritten."
msgstr ""

#: resources/qml/Preferences/ProfilesPage.qml:140
msgctxt "@action:button"
msgid "Update profile."
msgstr ""

#: resources/qml/Preferences/ProfilesPage.qml:143
msgctxt "@action:tooltip"
msgid "Update profile with current settings/overrides"
msgstr ""

#: resources/qml/Preferences/ProfilesPage.qml:148
msgctxt "@action:button"
msgid "Discard current changes"
msgstr "Hylkää tehdyt muutokset"

#: resources/qml/Preferences/ProfilesPage.qml:158
msgctxt "@action:label"
msgid "This profile uses the defaults specified by the printer, so it has no settings/overrides in the list below."
msgstr "Tässä profiilissa käytetään tulostimen oletusarvoja, joten siinä ei ole alla olevan listan asetuksia tai ohituksia."

#: resources/qml/Preferences/ProfilesPage.qml:165
msgctxt "@action:label"
msgid "Your current settings match the selected profile."
msgstr "Nykyiset asetukset vastaavat valittua profiilia."

#: resources/qml/Preferences/ProfilesPage.qml:175
msgctxt "@title:tab"
msgid "Global Settings"
msgstr "Yleiset asetukset"

#: resources/qml/Preferences/ProfilesPage.qml:278
msgctxt "@title:window"
msgid "Create Profile"
msgstr "Luo profiili"

#: resources/qml/Preferences/ProfilesPage.qml:280
msgctxt "@info"
msgid "Please provide a name for this profile."
msgstr ""

#: resources/qml/Preferences/ProfilesPage.qml:352
#: resources/qml/Preferences/ProfilesPage.qml:368
msgctxt "@title:window"
msgid "Export Profile"
msgstr "Profiilin vienti"

#: resources/qml/Preferences/ProfilesPage.qml:382
msgctxt "@title:window"
msgid "Duplicate Profile"
msgstr "Monista profiili"

#: resources/qml/Preferences/ProfilesPage.qml:409
msgctxt "@title:window"
msgid "Rename Profile"
msgstr "Nimeä profiili uudelleen"

#: resources/qml/Preferences/ProfilesPage.qml:422
#: resources/qml/Preferences/ProfilesPage.qml:429
msgctxt "@title:window"
msgid "Import Profile"
msgstr "Profiilin tuonti"

#: resources/qml/Preferences/SettingVisibilityItem.qml:56
msgctxt "@item:tooltip"
msgid "This setting has been hidden by the active machine and will not be visible."
msgstr ""

#: resources/qml/Preferences/SettingVisibilityItem.qml:73
msgctxt "@item:tooltip %1 is list of setting names"
msgid "This setting has been hidden by the value of %1. Change the value of that setting to make this setting visible."
msgid_plural "This setting has been hidden by the values of %1. Change the values of those settings to make this setting visible."
msgstr[0] ""
msgstr[1] ""

#: resources/qml/Preferences/SettingVisibilityPage.qml:13
msgctxt "@title:tab"
msgid "Setting Visibility"
msgstr "Näkyvyyden asettaminen"

#: resources/qml/Preferences/SettingVisibilityPage.qml:55
msgctxt "@label:textbox"
msgid "Check all"
msgstr "Tarkista kaikki"

#: resources/qml/PrintMonitor.qml:156
msgctxt "@label"
msgid "Active print"
msgstr "Aktiivinen tulostustyö"

#: resources/qml/PrintMonitor.qml:164
msgctxt "@label"
msgid "Job Name"
msgstr "Työn nimi"

#: resources/qml/PrintMonitor.qml:172
msgctxt "@label"
msgid "Printing Time"
msgstr "Tulostusaika"

#: resources/qml/PrintMonitor.qml:180
msgctxt "@label"
msgid "Estimated time left"
msgstr "Aikaa jäljellä arviolta"

#: resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:46
msgctxt "@label"
msgid "Profile"
msgstr ""

#: resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:136
msgctxt "@tooltip"
msgid ""
"Some setting/override values are different from the values stored in the profile.\n"
"\n"
"Click to open the profile manager."
msgstr ""
"Jotkut asetusten ja ohitusten arvot eroavat profiiliin tallennetuista arvoista.\n"
"\n"
"Avaa profiilin hallinta napsauttamalla."

#: resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:158
msgctxt "@label:header"
msgid "Custom profiles"
msgstr ""

#: resources/qml/PrintSetupSelector/PrintSetupSelector.qml:20
msgctxt "@label shown when we load a Gcode file"
msgid "Print setup disabled. G-code file can not be modified."
msgstr ""

#: resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:179
msgctxt "@button"
msgid "Recommended"
msgstr ""

#: resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13
msgctxt "@label:Should be short"
msgid "On"
msgstr ""

#: resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14
msgctxt "@label:Should be short"
msgid "Off"
msgstr ""

#: resources/qml/PrintSetupSelector/ProfileWarningReset.qml:65
msgctxt "@info, %1 is the name of the custom profile"
msgid "<b>%1</b> custom profile is active and you overwrote some settings."
msgstr ""

#: resources/qml/PrintSetupSelector/ProfileWarningReset.qml:78
msgctxt "@info, %1 is the name of the custom profile"
msgid "<b>%1</b> custom profile is overriding some settings."
msgstr ""

#: resources/qml/PrintSetupSelector/ProfileWarningReset.qml:92
msgctxt "@info %1 is the name of a profile"
msgid "Recommended settings (for <b>%1</b>) were altered."
msgstr ""

#: resources/qml/PrintSetupSelector/ProfileWarningReset.qml:106
msgctxt "@info %1 is the name of a profile"
msgid "Some setting-values defined in <b>%1</b> were overridden."
msgstr ""

#: resources/qml/PrintSetupSelector/ProfileWarningReset.qml:137
msgctxt "@info"
msgid "Reset to defaults."
msgstr ""

#: resources/qml/PrintSetupSelector/ProfileWarningReset.qml:178
msgctxt "@info"
msgid "Compare and save."
msgstr ""

#: resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:15
msgctxt "@label"
msgid "Adhesion"
msgstr ""

#: resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:20
msgctxt "@label"
msgid "Enable printing a brim or raft. This will add a flat area around or under your object which is easy to cut off afterwards."
msgstr "Ota reunuksen tai pohjaristikon tulostus käyttöön. Tämä lisää kappaleen ympärille tai alle tasaisen alueen, joka on helppo leikata pois myöhemmin."

#: resources/qml/PrintSetupSelector/Recommended/RecommendedPrintSetup.qml:102
msgctxt "@label"
msgid "Recommended print settings"
msgstr ""

#: resources/qml/PrintSetupSelector/Recommended/RecommendedPrintSetup.qml:111
msgctxt "@button"
msgid "Show Custom"
msgstr ""

#: resources/qml/PrintSetupSelector/Recommended/RecommendedResolutionSelector.qml:27
msgctxt "@label"
msgid "Resolution"
msgstr ""

#: resources/qml/PrintSetupSelector/Recommended/RecommendedStrengthSelector.qml:16
msgctxt "@label"
msgid "Strength"
msgstr ""

#: resources/qml/PrintSetupSelector/Recommended/RecommendedStrengthSelector.qml:20
msgctxt "@label"
msgid "The following settings define the strength of your part."
msgstr ""

#: resources/qml/PrintSetupSelector/Recommended/RecommendedStrengthSelector.qml:34
msgctxt "infill_sparse_density description"
msgid "Infill Density"
msgstr ""

#: resources/qml/PrintSetupSelector/Recommended/RecommendedStrengthSelector.qml:35
msgctxt "@label"
msgid "Adjusts the density of infill of the print."
msgstr ""

#: resources/qml/PrintSetupSelector/Recommended/RecommendedStrengthSelector.qml:54
msgctxt "@action:label"
msgid "Infill Pattern"
msgstr ""

#: resources/qml/PrintSetupSelector/Recommended/RecommendedStrengthSelector.qml:56
msgctxt "@label"
msgid ""
"The pattern of the infill material of the print:\n"
"\n"
"For quick prints of non functional model choose line, zig zag or lightning infill.\n"
"\n"
"For functional part not subjected to a lot of stress we recommend grid or triangle or tri hexagon.\n"
"\n"
"For functional 3D prints which require high strength in multiple directions use cubic, cubic subdivision, quarter cubic, octet, and gyroid."
msgstr ""

#: resources/qml/PrintSetupSelector/Recommended/RecommendedStrengthSelector.qml:67
msgctxt "@action:label"
msgid "Shell Thickness"
msgstr ""

#: resources/qml/PrintSetupSelector/Recommended/RecommendedStrengthSelector.qml:68
msgctxt "@label"
msgid "Defines the thickness of your part side walls, roof and floor."
msgstr ""

#: resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:16
msgctxt "@label"
msgid "Support"
msgstr ""

#: resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:21
msgctxt "@label"
msgid "Generate structures to support parts of the model which have overhangs. Without these structures, these parts would collapse during printing."
msgstr "Muodosta rakenteita, jotka tukevat mallin ulokkeita sisältäviä osia. Ilman tukirakenteita kyseiset osat luhistuvat tulostuksen aikana."

#: resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:40
msgctxt "@action:label"
msgid "Support Type"
msgstr ""

#: resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:41
msgctxt "@label"
msgid ""
"Chooses between the techniques available to generate support. \n"
"\n"
"\"Normal\" support creates a support structure directly below the overhanging parts and drops those areas straight down. \n"
"\n"
"\"Tree\" support creates branches towards the overhanging areas that support the model on the tips of those branches, and allows the branches to crawl around the model to support it from the build plate as much as possible."
msgstr ""

#: resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:53
msgctxt "@action:label"
msgid "Print with"
msgstr ""

#: resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:54
msgctxt "@label"
msgid "The extruder train to use for printing the support. This is used in multi-extrusion."
msgstr ""

#: resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:67
msgctxt "@action:label"
msgid "Placement"
msgstr ""

#: resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:68
msgctxt "support_type description"
msgid "Adjusts the placement of the support structures. The placement can be set to touching build plate or everywhere. When set to everywhere the support structures will also be printed on the model."
msgstr ""

#: resources/qml/PrintSetupSelector/Recommended/UnsupportedProfileIndication.qml:31
msgctxt "@error"
msgid "Configuration not supported"
msgstr ""

#: resources/qml/PrintSetupSelector/Recommended/UnsupportedProfileIndication.qml:39
msgctxt "@message:text %1 is the name the printer uses for 'nozzle'."
msgid "No profiles are available for the selected material/%1 configuration. Please change your configuration."
msgstr ""

#: resources/qml/PrintSetupSelector/Recommended/UnsupportedProfileIndication.qml:47
msgctxt "@button:label"
msgid "Learn more"
msgstr ""

#: resources/qml/PrinterOutput/ExtruderBox.qml:40
msgctxt "@label"
msgid "Extruder"
msgstr "Suulake"

#: resources/qml/PrinterOutput/ExtruderBox.qml:70
msgctxt "@tooltip"
msgid "The target temperature of the hotend. The hotend will heat up or cool down towards this temperature. If this is 0, the hotend heating is turned off."
msgstr "Kuuman pään kohdelämpötila. Kuuma pää lämpenee tai viilenee kohti tätä lämpötilaa. Jos asetus on 0, kuuman pään lämmitys sammutetaan."

#: resources/qml/PrinterOutput/ExtruderBox.qml:105
msgctxt "@tooltip"
msgid "The current temperature of this hotend."
msgstr ""

#: resources/qml/PrinterOutput/ExtruderBox.qml:182
msgctxt "@tooltip of temperature input"
msgid "The temperature to pre-heat the hotend to."
msgstr ""

#: resources/qml/PrinterOutput/ExtruderBox.qml:271
#: resources/qml/PrinterOutput/HeatedBedBox.qml:259
msgctxt "@button Cancel pre-heating"
msgid "Cancel"
msgstr "Peruuta"

#: resources/qml/PrinterOutput/ExtruderBox.qml:274
#: resources/qml/PrinterOutput/HeatedBedBox.qml:263
msgctxt "@button"
msgid "Pre-heat"
msgstr "Esilämmitä"

#: resources/qml/PrinterOutput/ExtruderBox.qml:297
msgctxt "@tooltip of pre-heat"
msgid "Heat the hotend in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the hotend to heat up when you're ready to print."
msgstr ""

#: resources/qml/PrinterOutput/ExtruderBox.qml:335
msgctxt "@tooltip"
msgid "The colour of the material in this extruder."
msgstr "Tämän suulakkeen materiaalin väri."

#: resources/qml/PrinterOutput/ExtruderBox.qml:367
msgctxt "@tooltip"
msgid "The material in this extruder."
msgstr "Tämän suulakkeen materiaali."

#: resources/qml/PrinterOutput/ExtruderBox.qml:400
msgctxt "@tooltip"
msgid "The nozzle inserted in this extruder."
msgstr "Tähän suulakkeeseen liitetty suutin."

#: resources/qml/PrinterOutput/HeatedBedBox.qml:25
msgctxt "@label"
msgid "Build plate"
msgstr "Alusta"

#: resources/qml/PrinterOutput/HeatedBedBox.qml:55
msgctxt "@tooltip"
msgid "The target temperature of the heated bed. The bed will heat up or cool down towards this temperature. If this is 0, the bed heating is turned off."
msgstr "Lämmitettävän pöydän kohdelämpötila. Pöytä lämpenee tai viilenee kohti tätä lämpötilaa. Jos asetus on 0, pöydän lämmitys sammutetaan."

#: resources/qml/PrinterOutput/HeatedBedBox.qml:88
msgctxt "@tooltip"
msgid "The current temperature of the heated bed."
msgstr "Lämmitettävän pöydän nykyinen lämpötila."

#: resources/qml/PrinterOutput/HeatedBedBox.qml:162
msgctxt "@tooltip of temperature input"
msgid "The temperature to pre-heat the bed to."
msgstr "Lämmitettävän pöydän esilämmityslämpötila."

#: resources/qml/PrinterOutput/HeatedBedBox.qml:286
msgctxt "@tooltip of pre-heat"
msgid "Heat the bed in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the bed to heat up when you're ready to print."
msgstr "Lämmitä pöytä ennen tulostusta. Voit edelleen säätää tulostinta sen lämmitessä, eikä sinun tarvitse odottaa pöydän lämpiämistä, kun olet valmis tulostamaan."

#: resources/qml/PrinterOutput/ManualPrinterControl.qml:51
msgctxt "@label"
msgid "Printer control"
msgstr ""

#: resources/qml/PrinterOutput/ManualPrinterControl.qml:66
msgctxt "@label"
msgid "Jog Position"
msgstr ""

#: resources/qml/PrinterOutput/ManualPrinterControl.qml:82
msgctxt "@label"
msgid "X/Y"
msgstr ""

#: resources/qml/PrinterOutput/ManualPrinterControl.qml:162
msgctxt "@label"
msgid "Z"
msgstr ""

#: resources/qml/PrinterOutput/ManualPrinterControl.qml:217
msgctxt "@label"
msgid "Jog Distance"
msgstr ""

#: resources/qml/PrinterOutput/ManualPrinterControl.qml:257
msgctxt "@label"
msgid "Send G-code"
msgstr ""

#: resources/qml/PrinterOutput/ManualPrinterControl.qml:319
msgctxt "@tooltip of G-code command input"
msgid "Send a custom G-code command to the connected printer. Press 'enter' to send the command."
msgstr ""

#: resources/qml/PrinterOutput/OutputDeviceHeader.qml:55
msgctxt "@info:status"
msgid "The printer is not connected."
msgstr "Tulostinta ei ole yhdistetty."

#: resources/qml/PrinterSelector/MachineListButton.qml:34
msgctxt "@label"
msgid "Hide all connected printers"
msgstr ""

#: resources/qml/PrinterSelector/MachineListButton.qml:47
msgctxt "@label"
msgid "Show all connected printers"
msgstr ""

#: resources/qml/PrinterSelector/MachineSelector.qml:64
msgctxt "@status"
msgid "The cloud printer is offline. Please check if the printer is turned on and connected to the internet."
msgstr ""

#: resources/qml/PrinterSelector/MachineSelector.qml:68
msgctxt "@status"
msgid "This printer is not linked to your account. Please visit the Ultimaker Digital Factory to establish a connection."
msgstr ""

#: resources/qml/PrinterSelector/MachineSelector.qml:73
msgctxt "@status"
msgid "The cloud connection is currently unavailable. Please sign in to connect to the cloud printer."
msgstr ""

#: resources/qml/PrinterSelector/MachineSelector.qml:78
msgctxt "@status"
msgid "The cloud connection is currently unavailable. Please check your internet connection."
msgstr ""

#: resources/qml/PrinterSelector/MachineSelectorList.qml:30
#: resources/qml/PrinterSelector/MachineSelectorList.qml:32
msgctxt "@label"
msgid "Other printers"
msgstr ""

#: resources/qml/ProfileOverview.qml:36
msgctxt "@title:column"
msgid "Setting"
msgstr "Asetus"

#: resources/qml/ProfileOverview.qml:37
msgctxt "@title:column"
msgid "Profile"
msgstr "Profiili"

#: resources/qml/ProfileOverview.qml:38
msgctxt "@title:column"
msgid "Current"
msgstr "Nykyinen"

#: resources/qml/ProfileOverview.qml:39
msgctxt "@title:column Unit of measurement"
msgid "Unit"
msgstr ""

#: resources/qml/SearchBar.qml:17
msgctxt "@placeholder"
msgid "Search"
msgstr ""

#: resources/qml/Settings/SettingCategory.qml:115
msgctxt "@label"
msgid ""
"Some hidden settings use values different from their normal calculated value.\n"
"\n"
"Click to make these settings visible."
msgstr ""
"Jotkin piilotetut asetukset käyttävät arvoja, jotka eroavat normaaleista lasketuista arvoista.\n"
"\n"
"Tee asetuksista näkyviä napsauttamalla."

#: resources/qml/Settings/SettingItem.qml:84
msgctxt "@label"
msgid "This setting is not used because all the settings that it influences are overridden."
msgstr ""

#: resources/qml/Settings/SettingItem.qml:89
msgctxt "@label Header for list of settings."
msgid "Affects"
msgstr "Koskee seuraavia"

#: resources/qml/Settings/SettingItem.qml:94
msgctxt "@label Header for list of settings."
msgid "Affected By"
msgstr "Riippuu seuraavista"

#: resources/qml/Settings/SettingItem.qml:196
msgctxt "@label"
msgid "This setting is always shared between all extruders. Changing it here will change the value for all extruders."
msgstr ""

#: resources/qml/Settings/SettingItem.qml:200
msgctxt "@label"
msgid "This setting is resolved from conflicting extruder-specific values:"
msgstr ""

#: resources/qml/Settings/SettingItem.qml:240
msgctxt "@label"
msgid ""
"This setting has a value that is different from the profile.\n"
"\n"
"Click to restore the value of the profile."
msgstr ""
"Tämän asetuksen arvo eroaa profiilin arvosta.\n"
"\n"
"Palauta profiilin arvo napsauttamalla."

#: resources/qml/Settings/SettingItem.qml:340
msgctxt "@label"
msgid ""
"This setting is normally calculated, but it currently has an absolute value set.\n"
"\n"
"Click to restore the calculated value."
msgstr ""
"Tämä asetus on normaalisti laskettu, mutta sillä on tällä hetkellä absoluuttinen arvo.\n"
"\n"
"Palauta laskettu arvo napsauttamalla."

#: resources/qml/Settings/SettingView.qml:48
msgctxt "@label:textbox"
msgid "Search settings"
msgstr ""

#: resources/qml/Settings/SettingView.qml:395
msgctxt "@action:menu"
msgid "Copy value to all extruders"
msgstr "Kopioi arvo kaikkiin suulakepuristimiin"

#: resources/qml/Settings/SettingView.qml:404
msgctxt "@action:menu"
msgid "Copy all changed values to all extruders"
msgstr ""

#: resources/qml/Settings/SettingView.qml:440
msgctxt "@action:menu"
msgid "Hide this setting"
msgstr "Piilota tämä asetus"

#: resources/qml/Settings/SettingView.qml:453
msgctxt "@action:menu"
msgid "Don't show this setting"
msgstr "Älä näytä tätä asetusta"

#: resources/qml/Settings/SettingView.qml:457
msgctxt "@action:menu"
msgid "Keep this setting visible"
msgstr "Pidä tämä asetus näkyvissä"

#: resources/qml/Toolbar.qml:142
msgctxt "@label %1 is filled in with the name of an extruder"
msgid "Print Selected Model with %1"
msgid_plural "Print Selected Models with %1"
msgstr[0] "Tulosta valittu malli asetuksella %1"
msgstr[1] "Tulosta valitut mallit asetuksella %1"

#: resources/qml/ViewOrientationControls.qml:25
msgctxt "@info:tooltip"
msgid "3D View"
msgstr ""

#: resources/qml/ViewOrientationControls.qml:38
msgctxt "@info:tooltip"
msgid "Front View"
msgstr ""

#: resources/qml/ViewOrientationControls.qml:51
msgctxt "@info:tooltip"
msgid "Top View"
msgstr ""

#: resources/qml/ViewOrientationControls.qml:64
msgctxt "@info:tooltip"
msgid "Left View"
msgstr ""

#: resources/qml/ViewOrientationControls.qml:77
msgctxt "@info:tooltip"
msgid "Right View"
msgstr ""

#: resources/qml/ViewsSelector.qml:50
msgctxt "@label"
msgid "View type"
msgstr ""

#: resources/qml/WelcomePages/AddCloudPrintersView.qml:47
msgctxt "@label"
msgid "Add a Cloud printer"
msgstr ""

#: resources/qml/WelcomePages/AddCloudPrintersView.qml:73
msgctxt "@label"
msgid "Waiting for Cloud response"
msgstr ""

#: resources/qml/WelcomePages/AddCloudPrintersView.qml:83
msgctxt "@label"
msgid "No printers found in your account?"
msgstr ""

#: resources/qml/WelcomePages/AddCloudPrintersView.qml:117
msgctxt "@label"
msgid "The following printers in your account have been added in Cura:"
msgstr ""

#: resources/qml/WelcomePages/AddCloudPrintersView.qml:186
msgctxt "@button"
msgid "Add printer manually"
msgstr ""

#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:214
msgctxt "@label"
msgid "Manufacturer"
msgstr ""

#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:225
msgctxt "@label"
msgid "Profile author"
msgstr ""

#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:237
msgctxt "@label"
msgid "Printer name"
msgstr ""

#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:243
msgctxt "@text"
msgid "Please name your printer"
msgstr ""

#: resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:43
msgctxt "@label"
msgid "There is no printer found over your network."
msgstr ""

#: resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:162
msgctxt "@label"
msgid "Refresh"
msgstr ""

#: resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:173
msgctxt "@label"
msgid "Add printer by IP"
msgstr ""

#: resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:205
msgctxt "@label"
msgid "Troubleshooting"
msgstr ""

#: resources/qml/WelcomePages/AddPrinterByIpContent.qml:70
msgctxt "@label"
msgid "Add printer by IP address"
msgstr ""

#: resources/qml/WelcomePages/AddPrinterByIpContent.qml:128
msgctxt "@text"
msgid "Enter your printer's IP address."
msgstr ""

#: resources/qml/WelcomePages/AddPrinterByIpContent.qml:150
msgctxt "@button"
msgid "Add"
msgstr ""

#: resources/qml/WelcomePages/AddPrinterByIpContent.qml:195
msgctxt "@label"
msgid "Could not connect to device."
msgstr ""

#: resources/qml/WelcomePages/AddPrinterByIpContent.qml:196
#: resources/qml/WelcomePages/AddPrinterByIpContent.qml:201
msgctxt "@label"
msgid "Can't connect to your UltiMaker printer?"
msgstr ""

#: resources/qml/WelcomePages/AddPrinterByIpContent.qml:200
msgctxt "@label"
msgid "The printer at this address has not responded yet."
msgstr ""

#: resources/qml/WelcomePages/AddPrinterByIpContent.qml:231
msgctxt "@label"
msgid "This printer cannot be added because it's an unknown printer or it's not the host of a group."
msgstr ""

#: resources/qml/WelcomePages/AddPrinterByIpContent.qml:312
msgctxt "@button"
msgid "Connect"
msgstr ""

#: resources/qml/WelcomePages/AddThirdPartyPrinter.qml:29
msgctxt "@label"
msgid "Add a networked printer"
msgstr ""

#: resources/qml/WelcomePages/AddThirdPartyPrinter.qml:78
msgctxt "@label"
msgid "Add a non-networked printer"
msgstr ""

#: resources/qml/WelcomePages/AddThirdPartyPrinter.qml:102
msgctxt "@button"
msgid "Add UltiMaker printer via Digital Factory"
msgstr ""

#: resources/qml/WelcomePages/AddUltimakerOrThirdPartyPrinter.qml:29
msgctxt "@label"
msgid "In order to start using Cura you will need to configure a printer."
msgstr ""

#: resources/qml/WelcomePages/AddUltimakerOrThirdPartyPrinter.qml:36
msgctxt "@label"
msgid "What printer would you like to setup?"
msgstr ""

#: resources/qml/WelcomePages/AddUltimakerOrThirdPartyPrinter.qml:55
msgctxt "@button"
msgid "UltiMaker printer"
msgstr ""

#: resources/qml/WelcomePages/AddUltimakerOrThirdPartyPrinter.qml:64
msgctxt "@button"
msgid "Non UltiMaker printer"
msgstr ""

#: resources/qml/WelcomePages/AddUltimakerOrThirdPartyPrinter.qml:73
msgctxt "@button"
msgid "Learn more about adding printers to Cura"
msgstr ""

#: resources/qml/WelcomePages/AddUltimakerOrThirdPartyPrinterStack.qml:29
msgctxt "@label"
msgid "Add printer"
msgstr "Lisää tulostin"

#: resources/qml/WelcomePages/AddUltimakerPrinter.qml:33
msgctxt "@label"
msgid "New UltiMaker printers can be connected to Digital Factory and monitored remotely."
msgstr ""

#: resources/qml/WelcomePages/AddUltimakerPrinter.qml:70
msgctxt "@label"
msgid "If you are trying to add a new UltiMaker printer to Cura"
msgstr ""

#: resources/qml/WelcomePages/AddUltimakerPrinter.qml:80
msgctxt "@info"
msgid "Sign in into UltiMaker Digital Factory"
msgstr ""

#: resources/qml/WelcomePages/AddUltimakerPrinter.qml:81
msgctxt "@info"
msgid "Follow the procedure to add a new printer"
msgstr ""

#: resources/qml/WelcomePages/AddUltimakerPrinter.qml:82
msgctxt "@info"
msgid "Your new printer will automatically appear in Cura"
msgstr ""

#: resources/qml/WelcomePages/AddUltimakerPrinter.qml:100
msgctxt "@button"
msgid "Learn more"
msgstr ""

#: resources/qml/WelcomePages/AddUltimakerPrinter.qml:121
msgctxt "@button"
msgid "Add local printer"
msgstr ""

#: resources/qml/WelcomePages/AddUltimakerPrinter.qml:129
msgctxt "@button"
msgid "Sign in to Digital Factory"
msgstr ""

#: resources/qml/WelcomePages/AddUltimakerPrinter.qml:133
msgctxt "@button"
msgid "Waiting for new printers"
msgstr ""

#: resources/qml/WelcomePages/ChangelogContent.qml:24
msgctxt "@label"
msgid "Release Notes"
msgstr ""

#: resources/qml/WelcomePages/CloudContent.qml:123
msgctxt "@text"
msgid "Add material settings and plugins from the Marketplace"
msgstr ""

#: resources/qml/WelcomePages/CloudContent.qml:149
msgctxt "@text"
msgid "Backup and sync your material settings and plugins"
msgstr ""

#: resources/qml/WelcomePages/CloudContent.qml:175
msgctxt "@text"
msgid "Share ideas and get help from 48,000+ users in the UltiMaker Community"
msgstr ""

#: resources/qml/WelcomePages/CloudContent.qml:189
msgctxt "@button"
msgid "Skip"
msgstr ""

#: resources/qml/WelcomePages/CloudContent.qml:201
msgctxt "@text"
msgid "Create a free UltiMaker Account"
msgstr ""

#: resources/qml/WelcomePages/DropDownWidget.qml:93
msgctxt "@label"
msgid "Empty"
msgstr ""

#: resources/qml/WelcomePages/UserAgreementContent.qml:23
msgctxt "@label"
msgid "User Agreement"
msgstr ""

#: resources/qml/WelcomePages/UserAgreementContent.qml:67
msgctxt "@button"
msgid "Decline and close"
msgstr ""

#: resources/qml/WelcomePages/WhatsNewContent.qml:28
msgctxt "@label"
msgid "What's New"
msgstr ""

#: resources/qml/Widgets/ComboBox.qml:18
msgctxt "@label"
msgid "No items to select from"
msgstr ""