696844f1cf
Things to note: * Since there is no VersionUpgrader from 4.8 to 4.9, this versionUpgrader attempts to upgrade files made in 4.8. This means that it touches files with setting_version = 16. * The upgrade of the setting_version to 18 is currently commented out because we are not entirely sure that 18 will be the setting_version in 5.0. * This versionUpgrader removes the following three settings that were removed in libArachne * "Compensate Wall Overlaps" * "Compensate Outer Wall Overlaps" * "Compensate Inner Wall Overlaps" * The VersionUpgrader also disabled Fuzzy Skin from any profiles that may have it enabled, as fuzzy skin currently doesn't work in libArachne. * The printer definitions have NOT been updated to the new setting_version to avoid having to deal with an enormous merge conflict in case the setting_version of 5.0 is something other than 18. * Since the VersionUpgrader does not alter the setting_version, it will run every time Cura starts. In short, this versionUpgrader runs and removes the deleted settings but it does not really change the setting_version of any files. Contributes to CURA-7683 and CURA-7656
Cura
Ultimaker Cura is a state-of-the-art slicer application to prepare your 3D models for printing with a 3D printer. With hundreds of settings and hundreds of community-managed print profiles, Ultimaker Cura is sure to lead your next project to a success.
Logging Issues
For crashes and similar issues, please attach the following information:
- (On Windows) The log as produced by dxdiag (start -> run -> dxdiag -> save output)
- The Cura GUI log file, located at
%APPDATA%\cura\<Cura version>\cura.log(Windows), or usuallyC:\Users\\<your username>\AppData\Roaming\cura\<Cura version>\cura.log$USER/Library/Application Support/cura/<Cura version>/cura.log(OSX)$USER/.local/share/cura/<Cura version>/cura.log(Ubuntu/Linux)
If the Cura user interface still starts, you can also reach this directory from the application menu in Help -> Show settings folder
For additional support, you could also ask in the #cura channel on FreeNode IRC. For help with development, there is also the #cura-dev channel.
Dependencies
- Uranium Cura is built on top of the Uranium framework.
- CuraEngine This will be needed at runtime to perform the actual slicing.
- fdm_materials Required to load a printer that has swappable material profiles.
- PySerial Only required for USB printing support.
- python-zeroconf Only required to detect mDNS-enabled printers.
Build scripts
Please checkout cura-build for detailed building instructions.
Running from Source
Please check our Wiki page for details about running Cura from source.
Plugins
Please check our Wiki page for details about creating and using plugins.
Supported printers
Please check our Wiki page for guidelines about adding support for new machines.
Configuring Cura
Please check out Wiki page about configuration options for developers.
Translating Cura
Please check out Wiki page about how to translate Cura into other languages.
License
Cura is released under the terms of the LGPLv3 or higher. A copy of this license should be included with the software.