GitHub-Proxy/Cura
1
0
Fork 0
mirror of https://git.mirrors.martin98.com/https://github.com/Ultimaker/Cura synced 2025-04-22 05:39:37 +08:00
Code Issues Packages Projects Releases Wiki Activity
Cura/plugins/PostProcessingPlugin/scripts/ChangeAtZ.py
Diego Prado Gesto 68acb13853 CURA-4615 Rename to ChangeAtZ also the file, the class name and 
variables.
2018-02-14 17:23:02 +01:00

496 lines
25 KiB
Python
Raw Blame History

# ChangeAtZ script - Change printing parameters at a given height
# This script is the successor of the TweakAtZ plugin for legacy Cura.
# It contains code from the TweakAtZ plugin V1.0-V4.x and from the ExampleScript by Jaime van Kessel, Ultimaker B.V.
# It runs with the PostProcessingPlugin which is released under the terms of the AGPLv3 or higher.
# This script is licensed under the Creative Commons - Attribution - Share Alike (CC BY-SA) terms
#Authors of the ChangeAtZ plugin / script:
# Written by Steven Morlock, smorloc@gmail.com
# Modified by Ricardo Gomez, ricardoga@otulook.com, to add Bed Temperature and make it work with Cura_13.06.04+
# Modified by Stefan Heule, Dim3nsioneer@gmx.ch since V3.0 (see changelog below)
# Modified by Jaime van Kessel (Ultimaker), j.vankessel@ultimaker.com to make it work for 15.10 / 2.x
# Modified by Ruben Dulek (Ultimaker), r.dulek@ultimaker.com, to debug.
##history / changelog:
##V3.0.1: TweakAtZ-state default 1 (i.e. the plugin works without any TweakAtZ comment)
##V3.1: Recognizes UltiGCode and deactivates value reset, fan speed added, alternatively layer no. to tweak at,
## extruder three temperature disabled by "#Ex3"
##V3.1.1: Bugfix reset flow rate
##V3.1.2: Bugfix disable TweakAtZ on Cool Head Lift
##V3.2: Flow rate for specific extruder added (only for 2 extruders), bugfix parser,
## added speed reset at the end of the print
##V4.0: Progress bar, tweaking over multiple layers, M605&M606 implemented, reset after one layer option,
## extruder three code removed, tweaking print speed, save call of Publisher class,
## uses previous value from other plugins also on UltiGCode
##V4.0.1: Bugfix for doubled G1 commands
##V4.0.2: uses Cura progress bar instead of its own
##V4.0.3: Bugfix for cool head lift (contributed by luisonoff)
##V4.9.91: First version for Cura 15.06.x and PostProcessingPlugin
##V4.9.92: Modifications for Cura 15.10
##V4.9.93: Minor bugfixes (input settings) / documentation
##V4.9.94: Bugfix Combobox-selection; remove logger
##V5.0: Bugfix for fall back after one layer and doubled G0 commands when using print speed tweak, Initial version for Cura 2.x
##V5.0.1: Bugfix for calling unknown property 'bedTemp' of previous settings storage and unkown variable 'speed'
##V5.1: API Changes included for use with Cura 2.2
## Uses -
## M220 S<factor in percent> - set speed factor override percentage
## M221 S<factor in percent> - set flow factor override percentage
## M221 S<factor in percent> T<0-#toolheads> - set flow factor override percentage for single extruder
## M104 S<temp> T<0-#toolheads> - set extruder <T> to target temperature <S>
## M140 S<temp> - set bed target temperature
## M106 S<PWM> - set fan speed to target speed <S>
## M605/606 to save and recall material settings on the UM2
from ..Script import Script
#from UM.Logger import Logger
import re
class ChangeAtZ(Script):
version = "5.1.1"
def __init__(self):
super().__init__()
def getSettingDataString(self):
return """{
"name":"ChangeAtZ """ + self.version + """ (Experimental)",
"key":"ChangeAtZ",
"metadata": {},
"version": 2,
"settings":
{
"a_trigger":
{
"label": "Trigger",
"description": "Trigger at height or at layer no.",
"type": "enum",
"options": {"height":"Height","layer_no":"Layer No."},
"default_value": "height"
},
"b_targetZ":
{
"label": "Change Height",
"description": "Z height to change at",
"unit": "mm",
"type": "float",
"default_value": 5.0,
"minimum_value": "0",
"minimum_value_warning": "0.1",
"maximum_value_warning": "230",
"enabled": "a_trigger == 'height'"
},
"b_targetL":
{
"label": "Change Layer",
"description": "Layer no. to change at",
"unit": "",
"type": "int",
"default_value": 1,
"minimum_value": "-100",
"minimum_value_warning": "-1",
"enabled": "a_trigger == 'layer_no'"
},
"c_behavior":
{
"label": "Behavior",
"description": "Select behavior: Change value and keep it for the rest, Change value for single layer only",
"type": "enum",
"options": {"keep_value":"Keep value","single_layer":"Single Layer"},
"default_value": "keep_value"
},
"d_twLayers":
{
"label": "No. Layers",
"description": "No. of layers used to change",
"unit": "",
"type": "int",
"default_value": 1,
"minimum_value": "1",
"maximum_value_warning": "50",
"enabled": "c_behavior == 'keep_value'"
},
"e1_Change_speed":
{
"label": "Change Speed",
"description": "Select if total speed (print and travel) has to be cahnged",
"type": "bool",
"default_value": false
},
"e2_speed":
{
"label": "Speed",
"description": "New total speed (print and travel)",
"unit": "%",
"type": "int",
"default_value": 100,
"minimum_value": "1",
"minimum_value_warning": "10",
"maximum_value_warning": "200",
"enabled": "e1_Change_speed"
},
"f1_Change_printspeed":
{
"label": "Change Print Speed",
"description": "Select if print speed has to be changed",
"type": "bool",
"default_value": false
},
"f2_printspeed":
{
"label": "Print Speed",
"description": "New print speed",
"unit": "%",
"type": "int",
"default_value": 100,
"minimum_value": "1",
"minimum_value_warning": "10",
"maximum_value_warning": "200",
"enabled": "f1_Change_printspeed"
},
"g1_Change_flowrate":
{
"label": "Change Flow Rate",
"description": "Select if flow rate has to be changed",
"type": "bool",
"default_value": false
},
"g2_flowrate":
{
"label": "Flow Rate",
"description": "New Flow rate",
"unit": "%",
"type": "int",
"default_value": 100,
"minimum_value": "1",
"minimum_value_warning": "10",
"maximum_value_warning": "200",
"enabled": "g1_Change_flowrate"
},
"g3_Change_flowrateOne":
{
"label": "Change Flow Rate 1",
"description": "Select if first extruder flow rate has to be changed",
"type": "bool",
"default_value": false
},
"g4_flowrateOne":
{
"label": "Flow Rate One",
"description": "New Flow rate Extruder 1",
"unit": "%",
"type": "int",
"default_value": 100,
"minimum_value": "1",
"minimum_value_warning": "10",
"maximum_value_warning": "200",
"enabled": "g3_Change_flowrateOne"
},
"g5_Change_flowrateTwo":
{
"label": "Change Flow Rate 2",
"description": "Select if second extruder flow rate has to be changed",
"type": "bool",
"default_value": false
},
"g6_flowrateTwo":
{
"label": "Flow Rate two",
"description": "New Flow rate Extruder 2",
"unit": "%",
"type": "int",
"default_value": 100,
"minimum_value": "1",
"minimum_value_warning": "10",
"maximum_value_warning": "200",
"enabled": "g5_Change_flowrateTwo"
},
"h1_Change_bedTemp":
{
"label": "Change Bed Temp",
"description": "Select if Bed Temperature has to be changed",
"type": "bool",
"default_value": false
},
"h2_bedTemp":
{
"label": "Bed Temp",
"description": "New Bed Temperature",
"unit": "C",
"type": "float",
"default_value": 60,
"minimum_value": "0",
"minimum_value_warning": "30",
"maximum_value_warning": "120",
"enabled": "h1_Change_bedTemp"
},
"i1_Change_extruderOne":
{
"label": "Change Extruder 1 Temp",
"description": "Select if First Extruder Temperature has to be changed",
"type": "bool",
"default_value": false
},
"i2_extruderOne":
{
"label": "Extruder 1 Temp",
"description": "New First Extruder Temperature",
"unit": "C",
"type": "float",
"default_value": 190,
"minimum_value": "0",
"minimum_value_warning": "160",
"maximum_value_warning": "250",
"enabled": "i1_Change_extruderOne"
},
"i3_Change_extruderTwo":
{
"label": "Change Extruder 2 Temp",
"description": "Select if Second Extruder Temperature has to be changed",
"type": "bool",
"default_value": false
},
"i4_extruderTwo":
{
"label": "Extruder 2 Temp",
"description": "New Second Extruder Temperature",
"unit": "C",
"type": "float",
"default_value": 190,
"minimum_value": "0",
"minimum_value_warning": "160",
"maximum_value_warning": "250",
"enabled": "i3_Change_extruderTwo"
},
"j1_Change_fanSpeed":
{
"label": "Change Fan Speed",
"description": "Select if Fan Speed has to be changed",
"type": "bool",
"default_value": false
},
"j2_fanSpeed":
{
"label": "Fan Speed",
"description": "New Fan Speed (0-255)",
"unit": "PWM",
"type": "int",
"default_value": 255,
"minimum_value": "0",
"minimum_value_warning": "15",
"maximum_value_warning": "255",
"enabled": "j1_Change_fanSpeed"
}
}
}"""
def getValue(self, line, key, default = None): #replace default getvalue due to comment-reading feature
if not key in line or (";" in line and line.find(key) > line.find(";") and
not ";ChangeAtZ" in key and not ";LAYER:" in key):
return default
subPart = line[line.find(key) + len(key):] #allows for string lengths larger than 1
if ";ChangeAtZ" in key:
m = re.search("^[0-4]", subPart)
elif ";LAYER:" in key:
m = re.search("^[+-]?[0-9]*", subPart)
else:
#the minus at the beginning allows for negative values, e.g. for delta printers
m = re.search("^[-]?[0-9]*\.?[0-9]*", subPart)
if m == None:
return default
try:
return float(m.group(0))
except:
return default
def execute(self, data):
#Check which changes should apply
ChangeProp = {"speed": self.getSettingValueByKey("e1_Change_speed"),
"flowrate": self.getSettingValueByKey("g1_Change_flowrate"),
"flowrateOne": self.getSettingValueByKey("g3_Change_flowrateOne"),
"flowrateTwo": self.getSettingValueByKey("g5_Change_flowrateTwo"),
"bedTemp": self.getSettingValueByKey("h1_Change_bedTemp"),
"extruderOne": self.getSettingValueByKey("i1_Change_extruderOne"),
"extruderTwo": self.getSettingValueByKey("i3_Change_extruderTwo"),
"fanSpeed": self.getSettingValueByKey("j1_Change_fanSpeed")}
ChangePrintSpeed = self.getSettingValueByKey("f1_Change_printspeed")
ChangeStrings = {"speed": "M220 S%f\n",
"flowrate": "M221 S%f\n",
"flowrateOne": "M221 T0 S%f\n",
"flowrateTwo": "M221 T1 S%f\n",
"bedTemp": "M140 S%f\n",
"extruderOne": "M104 S%f T0\n",
"extruderTwo": "M104 S%f T1\n",
"fanSpeed": "M106 S%d\n"}
target_values = {"speed": self.getSettingValueByKey("e2_speed"),
"printspeed": self.getSettingValueByKey("f2_printspeed"),
"flowrate": self.getSettingValueByKey("g2_flowrate"),
"flowrateOne": self.getSettingValueByKey("g4_flowrateOne"),
"flowrateTwo": self.getSettingValueByKey("g6_flowrateTwo"),
"bedTemp": self.getSettingValueByKey("h2_bedTemp"),
"extruderOne": self.getSettingValueByKey("i2_extruderOne"),
"extruderTwo": self.getSettingValueByKey("i4_extruderTwo"),
"fanSpeed": self.getSettingValueByKey("j2_fanSpeed")}
old = {"speed": -1, "flowrate": -1, "flowrateOne": -1, "flowrateTwo": -1, "platformTemp": -1, "extruderOne": -1,
"extruderTwo": -1, "bedTemp": -1, "fanSpeed": -1, "state": -1}
twLayers = self.getSettingValueByKey("d_twLayers")
if self.getSettingValueByKey("c_behavior") == "single_layer":
behavior = 1
else:
behavior = 0
try:
twLayers = max(int(twLayers),1) #for the case someone entered something as "funny" as -1
except:
twLayers = 1
pres_ext = 0
done_layers = 0
z = 0
x = None
y = None
layer = -100000 #layer no. may be negative (raft) but never that low
# state 0: deactivated, state 1: activated, state 2: active, but below z,
# state 3: active and partially executed (multi layer), state 4: active and passed z
state = 1
# IsUM2: Used for reset of values (ok for Marlin/Sprinter),
# has to be set to 1 for UltiGCode (work-around for missing default values)
IsUM2 = False
oldValueUnknown = False
TWinstances = 0
if self.getSettingValueByKey("a_trigger") == "layer_no":
targetL_i = int(self.getSettingValueByKey("b_targetL"))
targetZ = 100000
else:
targetL_i = -100000
targetZ = self.getSettingValueByKey("b_targetZ")
index = 0
for active_layer in data:
modified_gcode = ""
lines = active_layer.split("\n")
for line in lines:
if ";Generated with Cura_SteamEngine" in line:
TWinstances += 1
modified_gcode += ";ChangeAtZ instances: %d\n" % TWinstances
if not ("M84" in line or "M25" in line or ("G1" in line and ChangePrintSpeed and (state==3 or state==4)) or
";ChangeAtZ instances:" in line):
modified_gcode += line + "\n"
IsUM2 = ("FLAVOR:UltiGCode" in line) or IsUM2 #Flavor is UltiGCode!
if ";ChangeAtZ-state" in line: #checks for state change comment
state = self.getValue(line, ";ChangeAtZ-state", state)
if ";ChangeAtZ instances:" in line:
try:
tempTWi = int(line[20:])
except:
tempTWi = TWinstances
TWinstances = tempTWi
if ";Small layer" in line: #checks for begin of Cool Head Lift
old["state"] = state
state = 0
if ";LAYER:" in line: #new layer no. found
if state == 0:
state = old["state"]
layer = self.getValue(line, ";LAYER:", layer)
if targetL_i > -100000: #target selected by layer no.
if (state == 2 or targetL_i == 0) and layer == targetL_i: #determine targetZ from layer no.; checks for change on layer 0
state = 2
targetZ = z + 0.001
if (self.getValue(line, "T", None) is not None) and (self.getValue(line, "M", None) is None): #looking for single T-cmd
pres_ext = self.getValue(line, "T", pres_ext)
if "M190" in line or "M140" in line and state < 3: #looking for bed temp, stops after target z is passed
old["bedTemp"] = self.getValue(line, "S", old["bedTemp"])
if "M109" in line or "M104" in line and state < 3: #looking for extruder temp, stops after target z is passed
if self.getValue(line, "T", pres_ext) == 0:
old["extruderOne"] = self.getValue(line, "S", old["extruderOne"])
elif self.getValue(line, "T", pres_ext) == 1:
old["extruderTwo"] = self.getValue(line, "S", old["extruderTwo"])
if "M107" in line: #fan is stopped; is always updated in order not to miss switch off for next object
old["fanSpeed"] = 0
if "M106" in line and state < 3: #looking for fan speed
old["fanSpeed"] = self.getValue(line, "S", old["fanSpeed"])
if "M221" in line and state < 3: #looking for flow rate
tmp_extruder = self.getValue(line,"T",None)
if tmp_extruder == None: #check if extruder is specified
old["flowrate"] = self.getValue(line, "S", old["flowrate"])
elif tmp_extruder == 0: #first extruder
old["flowrateOne"] = self.getValue(line, "S", old["flowrateOne"])
elif tmp_extruder == 1: #second extruder
old["flowrateOne"] = self.getValue(line, "S", old["flowrateOne"])
if ("M84" in line or "M25" in line):
if state>0 and ChangeProp["speed"]: #"finish" commands for UM Original and UM2
modified_gcode += "M220 S100 ; speed reset to 100% at the end of print\n"
modified_gcode += "M117 \n"
modified_gcode += line + "\n"
if "G1" in line or "G0" in line:
newZ = self.getValue(line, "Z", z)
x = self.getValue(line, "X", None)
y = self.getValue(line, "Y", None)
e = self.getValue(line, "E", None)
f = self.getValue(line, "F", None)
if 'G1' in line and ChangePrintSpeed and (state==3 or state==4):
# check for pure print movement in target range:
if x != None and y != None and f != None and e != None and newZ==z:
modified_gcode += "G1 F%d X%1.3f Y%1.3f E%1.5f\n" % (int(f / 100.0 * float(target_values["printspeed"])), self.getValue(line, "X"),
self.getValue(line, "Y"), self.getValue(line, "E"))
else: #G1 command but not a print movement
modified_gcode += line + "\n"
# no changing on retraction hops which have no x and y coordinate:
if (newZ != z) and (x is not None) and (y is not None):
z = newZ
if z < targetZ and state == 1:
state = 2
if z >= targetZ and state == 2:
state = 3
done_layers = 0
for key in ChangeProp:
if ChangeProp[key] and old[key]==-1: #old value is not known
oldValueUnknown = True
if oldValueUnknown: #the changing has to happen within one layer
twLayers = 1
if IsUM2: #Parameters have to be stored in the printer (UltiGCode=UM2)
modified_gcode += "M605 S%d;stores parameters before changing\n" % (TWinstances-1)
if behavior == 1: #single layer change only and then reset
twLayers = 1
if ChangePrintSpeed and behavior == 0:
twLayers = done_layers + 1
if state==3:
if twLayers-done_layers>0: #still layers to go?
if targetL_i > -100000:
modified_gcode += ";ChangeAtZ V%s: executed at Layer %d\n" % (self.version,layer)
modified_gcode += "M117 Printing... ch@L%4d\n" % layer
else:
modified_gcode += (";ChangeAtZ V%s: executed at %1.2f mm\n" % (self.version,z))
modified_gcode += "M117 Printing... ch@%5.1f\n" % z
for key in ChangeProp:
if ChangeProp[key]:
modified_gcode += ChangeStrings[key] % float(old[key]+(float(target_values[key])-float(old[key]))/float(twLayers)*float(done_layers+1))
done_layers += 1
else:
state = 4
if behavior == 1: #reset values after one layer
if targetL_i > -100000:
modified_gcode += ";ChangeAtZ V%s: reset on Layer %d\n" % (self.version,layer)
else:
modified_gcode += ";ChangeAtZ V%s: reset at %1.2f mm\n" % (self.version,z)
if IsUM2 and oldValueUnknown: #executes on UM2 with Ultigcode and machine setting
modified_gcode += "M606 S%d;recalls saved settings\n" % (TWinstances-1)
else: #executes on RepRap, UM2 with Ultigcode and Cura setting
for key in ChangeProp:
if ChangeProp[key]:
modified_gcode += ChangeStrings[key] % float(old[key])
# re-activates the plugin if executed by pre-print G-command, resets settings:
if (z < targetZ or layer == 0) and state >= 3: #resets if below change level or at level 0
state = 2
done_layers = 0
if targetL_i > -100000:
modified_gcode += ";ChangeAtZ V%s: reset below Layer %d\n" % (self.version,targetL_i)
else:
modified_gcode += ";ChangeAtZ V%s: reset below %1.2f mm\n" % (self.version,targetZ)
if IsUM2 and oldValueUnknown: #executes on UM2 with Ultigcode and machine setting
modified_gcode += "M606 S%d;recalls saved settings\n" % (TWinstances-1)
else: #executes on RepRap, UM2 with Ultigcode and Cura setting
for key in ChangeProp:
if ChangeProp[key]:
modified_gcode += ChangeStrings[key] % float(old[key])
data[index] = modified_gcode
index += 1
return data
Reference in New Issue View Git Blame Copy Permalink