mirror of
https://git.mirrors.martin98.com/https://github.com/Ultimaker/Cura
synced 2025-06-29 22:25:11 +08:00
5392b8f65c
Even though it was commented-out, it was still being detected and made Cura think that the start g-code was heating up the nozzles by itself. I've removed the lines so that the normal temperature commands get inserted by Cura automatically.
101 lines
3.4 KiB
JSON
101 lines
3.4 KiB
JSON
{
|
|
"id": "rigidbot",
|
|
"version": 2,
|
|
"name": "RigidBot",
|
|
"inherits": "fdmprinter",
|
|
"metadata": {
|
|
"visible": true,
|
|
"author": "RBC",
|
|
"manufacturer": "RigidBot",
|
|
"category": "Other",
|
|
"file_formats": "text/x-gcode",
|
|
"platform": "rigidbot_platform.stl"
|
|
},
|
|
|
|
"overrides": {
|
|
"machine_name": { "default_value": "RigidBot" },
|
|
"machine_width": {
|
|
"default_value": 254
|
|
},
|
|
"machine_depth": {
|
|
"default_value": 254
|
|
},
|
|
"machine_height": {
|
|
"default_value": 254
|
|
},
|
|
"machine_heated_bed": {
|
|
"default_value": true
|
|
},
|
|
"machine_nozzle_heat_up_speed": {
|
|
"default_value": 2
|
|
},
|
|
"machine_nozzle_cool_down_speed": {
|
|
"default_value": 2
|
|
},
|
|
"gantry_height": {
|
|
"default_value": 0
|
|
},
|
|
"machine_gcode_flavor": {
|
|
"default_value": "RepRap (Marlin/Sprinter)"
|
|
},
|
|
"machine_start_gcode": {
|
|
"default_value": ";Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {infill_sparse_density}\nG21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nM205 X8 ;X/Y Jerk settings\nG1 Z15.0 F{speed_travel} ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E7 ;extrude 3mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F{speed_travel}\n;Put printing message on LCD screen\nM117 Rigibot Printing..."
|
|
},
|
|
"machine_end_gcode": {
|
|
"default_value": ";End GCode\nM104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+10 E-1 X-20 Y-20 F{speed_travel} ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nG1 Y230 F3000 ;move Y so the head is out of the way and Plate is moved forward\nM84 ;steppers off\nG90 ;absolute positioning"
|
|
},
|
|
"layer_height": {
|
|
"default_value": 0.2
|
|
},
|
|
"wall_thickness": {
|
|
"default_value": 0.8
|
|
},
|
|
"top_bottom_thickness": {
|
|
"default_value": 0.3
|
|
},
|
|
"material_print_temperature": {
|
|
"default_value": 195
|
|
},
|
|
"material_bed_temperature": {
|
|
"default_value": 60
|
|
},
|
|
"material_diameter": {
|
|
"default_value": 1.75
|
|
},
|
|
"speed_print": {
|
|
"default_value": 60
|
|
},
|
|
"speed_infill": {
|
|
"default_value": 100
|
|
},
|
|
"speed_topbottom": {
|
|
"default_value": 15
|
|
},
|
|
"speed_travel": {
|
|
"default_value": 150
|
|
},
|
|
"speed_layer_0": {
|
|
"default_value": 15,
|
|
"minimum_value": "0.1"
|
|
},
|
|
"infill_overlap": {
|
|
"default_value": 10
|
|
},
|
|
"cool_fan_enabled": {
|
|
"default_value": false
|
|
},
|
|
"cool_fan_speed": {
|
|
"default_value": 0
|
|
},
|
|
"skirt_line_count": {
|
|
"default_value": 3
|
|
},
|
|
"skirt_gap": {
|
|
"default_value": 4
|
|
},
|
|
"skirt_brim_minimal_length": {
|
|
"default_value": 200
|
|
}
|
|
}
|
|
}
|