mirror of
https://git.mirrors.martin98.com/https://github.com/Ultimaker/Cura
synced 2025-10-04 09:26:33 +08:00
87072cc0fe
Previously we used the PLA quality files to print Metallic PLA. There were drastic differences in surface quality (matte vs shiny). The temperature increase to 230 addresses the surface differences. We reduced the print speed to stay within the max flowrate of 12 mm^3/s. Additionally, the infill rotation was enabled for Metallic PLA (Similar to Sketch PLA infill). Some other speed adjustments were made (walls, roof, support interface, support bottom). These were paths that got slowed down too much when adjusting the global print speed. These adjustments were made to make up some of the lost speed without sacrificing print quality. The previous support material flow value was set to 90%. We increased it by 2% to limit under-extrusion, which is more pronounced at the higher nozzle temperature. PP-552
211 lines
8.7 KiB
JSON
211 lines
8.7 KiB
JSON
{
|
|
"version": 2,
|
|
"name": "MakerBot Sketch",
|
|
"inherits": "ultimaker",
|
|
"metadata":
|
|
{
|
|
"visible": true,
|
|
"author": "Ultimaker",
|
|
"manufacturer": "Ultimaker B.V.",
|
|
"file_formats": "application/x-makerbot-sketch",
|
|
"platform": "ultimaker_sketch_platform.obj",
|
|
"exclude_materials": [
|
|
"dsm_",
|
|
"Essentium_",
|
|
"imade3d_",
|
|
"chromatik_",
|
|
"3D-Fuel_",
|
|
"bestfilament_",
|
|
"eazao_",
|
|
"emotiontech_",
|
|
"eryone_",
|
|
"eSUN_",
|
|
"Extrudr_",
|
|
"fabtotum_",
|
|
"fdplast_",
|
|
"filo3d_",
|
|
"ultimaker_rapidrinse_175",
|
|
"goofoo_",
|
|
"ideagen3D_",
|
|
"imade3d_",
|
|
"innofill_",
|
|
"layer_one_",
|
|
"leapfrog_",
|
|
"polyflex_pla",
|
|
"polymax_pla",
|
|
"polyplus_pla",
|
|
"polywood_pla",
|
|
"redd_",
|
|
"tizyx_",
|
|
"verbatim_",
|
|
"Vertex_",
|
|
"volumic_",
|
|
"xyzprinting_",
|
|
"zyyx_pro_",
|
|
"octofiber_",
|
|
"fiberlogy_",
|
|
"generic_",
|
|
"ultimaker_asa",
|
|
"ultimaker_abs",
|
|
"ultimaker_nylon",
|
|
"ultimaker_pva",
|
|
"ultimaker_rapidrinse",
|
|
"ultimaker_sr30",
|
|
"ultimaker_petg",
|
|
"basf_",
|
|
"jabil_",
|
|
"polymaker_",
|
|
"ultimaker_rapidrinse",
|
|
"ultimaker_sr30",
|
|
"ultimaker_petg",
|
|
"ultimaker_pva",
|
|
"ultimaker_metallic_pla"
|
|
],
|
|
"has_machine_quality": true,
|
|
"has_materials": true,
|
|
"has_variants": true,
|
|
"machine_extruder_trains": { "0": "ultimaker_sketch_extruder" },
|
|
"preferred_quality_type": "draft",
|
|
"preferred_variant_name": "0.4mm",
|
|
"reference_machine_id": "sketch",
|
|
"supports_network_connection": true,
|
|
"supports_usb_connection": false,
|
|
"variants_name": "Extruder",
|
|
"variants_name_has_translation": true,
|
|
"weight": -1
|
|
},
|
|
"overrides":
|
|
{
|
|
"acceleration_enabled":
|
|
{
|
|
"enabled": false,
|
|
"value": false
|
|
},
|
|
"adhesion_type": { "value": "'skirt'" },
|
|
"brim_width": { "value": "3" },
|
|
"cool_during_extruder_switch":
|
|
{
|
|
"enabled": false,
|
|
"value": false
|
|
},
|
|
"cool_fan_full_at_height": { "value": "layer_height + layer_height_0" },
|
|
"cool_fan_speed": { "value": 100 },
|
|
"cool_fan_speed_0": { "value": 0 },
|
|
"cool_min_layer_time": { "value": 8 },
|
|
"extruder_prime_pos_abs": { "default_value": true },
|
|
"fill_outline_gaps": { "value": false },
|
|
"gantry_height": { "value": "60" },
|
|
"infill_angles": { "value": "[45,45,45,45,45,135,135,135,135,135]" },
|
|
"infill_before_walls": { "value": false },
|
|
"infill_overlap": { "value": 0 },
|
|
"infill_pattern": { "value": "'zigzag'" },
|
|
"infill_sparse_density": { "value": 20 },
|
|
"infill_wipe_dist": { "value": 0 },
|
|
"initial_layer_line_width_factor": { "value": 125 },
|
|
"inset_direction": { "value": "'inside_out'" },
|
|
"jerk_enabled":
|
|
{
|
|
"enabled": false,
|
|
"value": false
|
|
},
|
|
"layer_height_0": { "value": "layer_height * 1.25" },
|
|
"layer_start_x": { "value": "sum(extruderValues('machine_extruder_start_pos_x')) / len(extruderValues('machine_extruder_start_pos_x'))" },
|
|
"layer_start_y": { "value": "sum(extruderValues('machine_extruder_start_pos_y')) / len(extruderValues('machine_extruder_start_pos_y'))" },
|
|
"machine_center_is_zero": { "default_value": true },
|
|
"machine_depth": { "default_value": 150 },
|
|
"machine_end_gcode": { "default_value": "M107; Disable Fan; \n; End of print; \n; End GCode\nM104 S0 T0; Set Toolhead Temp to 0\nM140 S0 T0; Set Platform Temp to 0\nG162 Z F1800; Move to max axes position\nG28 X Y; Home\nM652; Turn off back fan\nM132 X Y Z A B; Set Home Position\nG91; Use Relative Positioning\nM18; Disable Axes\n\n" },
|
|
"machine_extruder_count": { "default_value": 1 },
|
|
"machine_gcode_flavor": { "default_value": "Griffin" },
|
|
"machine_heated_bed": { "default_value": true },
|
|
"machine_height": { "default_value": 150 },
|
|
"machine_max_feedrate_x": { "default_value": 300 },
|
|
"machine_max_feedrate_y": { "default_value": 300 },
|
|
"machine_max_feedrate_z": { "default_value": 40 },
|
|
"machine_min_cool_heat_time_window": { "value": "15" },
|
|
"machine_name": { "default_value": "MakerBot Sketch" },
|
|
"machine_nozzle_cool_down_speed": { "default_value": 0.8 },
|
|
"machine_nozzle_heat_up_speed": { "default_value": 1.4 },
|
|
"machine_start_gcode": { "default_value": "M140 S50 T0; Set Platform Temp\nM104 S220 T0; Set Extruder Temp\nG90; Use Absolute Positioning\nG28; Home\nM132 X Y Z A B; Set Current Position to Home\nG161 X Y F3300; Move to min axes positions\nM7 T0; Wait For Platform to Heat\nM6 T0; Wait For Extruders to Heat\nM651; Turn on back fan\nM907 X100 Y100 Z40 A80 B20; Set Stepper Currents\nM106; Enable Cooling Fan\n; Purge Line\nG92 E0; Reset Extruder Axis Position\nG1 X-26.18 Y-75.90 Z0.200 F420\nG1 X26.18 Y-75.90 E10\nG92 E0; Reset Extruder Axis Position\n; Start GCode\n" },
|
|
"machine_width": { "default_value": 150 },
|
|
"material_bed_temperature":
|
|
{
|
|
"maximum_value": 100,
|
|
"maximum_value_warning": 70
|
|
},
|
|
"material_bed_temperature_layer_0":
|
|
{
|
|
"maximum_value": 100,
|
|
"maximum_value_warning": 70
|
|
},
|
|
"material_diameter": { "default_value": 1.75 },
|
|
"material_flow": { "default_value": 100 },
|
|
"material_print_temperature":
|
|
{
|
|
"maximum_value": 240,
|
|
"maximum_value_warning": 230
|
|
},
|
|
"min_bead_width":
|
|
{
|
|
"minimum_value": "line_width * 0.5",
|
|
"minimum_value_warning": "line_width * 0.75",
|
|
"value": "line_width"
|
|
},
|
|
"min_wall_line_width":
|
|
{
|
|
"minimum_value": "line_width * 0.5",
|
|
"minimum_value_warning": "line_width * 0.75",
|
|
"value": "line_width"
|
|
},
|
|
"multiple_mesh_overlap": { "value": "0" },
|
|
"optimize_wall_printing_order": { "value": "True" },
|
|
"prime_blob_enable":
|
|
{
|
|
"default_value": true,
|
|
"enabled": true,
|
|
"value": "resolveOrValue('print_sequence') != 'one_at_a_time'"
|
|
},
|
|
"print_sequence": { "enabled": false },
|
|
"raft_margin": { "value": "5" },
|
|
"retract_at_layer_change": { "value": true },
|
|
"retraction_amount":
|
|
{
|
|
"maximum_value": 6,
|
|
"maximum_value_warning": 5.75,
|
|
"value": 5.5
|
|
},
|
|
"retraction_combing": { "value": "'no_outer_surfaces'" },
|
|
"retraction_min_travel": { "value": "2 * line_width" },
|
|
"retraction_prime_speed": { "value": "15" },
|
|
"retraction_speed": { "value": "25" },
|
|
"roofing_material_flow": { "value": 100 },
|
|
"skin_material_flow": { "value": 95 },
|
|
"skin_material_flow_layer_0": { "value": 100 },
|
|
"skirt_brim_line_width": { "value": 1 },
|
|
"skirt_brim_speed": { "value": 15 },
|
|
"skirt_height": { "value": 3 },
|
|
"speed_print": { "value": 50 },
|
|
"speed_roofing": { "value": "0.8 * speed_print" },
|
|
"speed_support": { "value": "0.7 * speed_print" },
|
|
"speed_support_interface": { "value": "speed_topbottom" },
|
|
"speed_topbottom": { "value": "speed_roofing" },
|
|
"speed_travel": { "value": 80 },
|
|
"speed_wall": { "value": "0.5 * speed_print" },
|
|
"speed_wall_0": { "value": "1 * speed_wall" },
|
|
"speed_wall_x": { "value": "1 * speed_wall" },
|
|
"speed_z_hop": { "value": 10 },
|
|
"support_angle": { "value": "45" },
|
|
"support_structure": { "value": "'tree'" },
|
|
"top_bottom_thickness": { "value": "4 * layer_height" },
|
|
"travel_avoid_distance": { "value": "machine_nozzle_tip_outer_diameter / 2 * 1.5" },
|
|
"travel_avoid_supports": { "value": true },
|
|
"wall_0_inset": { "value": "0" },
|
|
"wall_0_material_flow_layer_0": { "value": "1 * material_flow" },
|
|
"wall_thickness": { "value": "2 * machine_nozzle_size" },
|
|
"wall_x_material_flow": { "value": "0.95 * material_flow" },
|
|
"wall_x_material_flow_layer_0": { "value": "1 * material_flow" },
|
|
"xy_offset": { "value": 0 },
|
|
"xy_offset_layer_0": { "value": 0 },
|
|
"z_seam_corner": { "value": "'z_seam_corner_any'" },
|
|
"zig_zaggify_infill": { "value": "gradual_infill_steps == 0" }
|
|
}
|
|
} |