8d13cfb5d6
This way, if travel moves are not currently visible in the layer view, the travel moves don't get counted with the limits to determine the colour spectrum to grade each line with. Quite often, travel moves had a much greater speed than other moves, like 120mm/s instead of the fastest printed line 60mm/s. This caused all of the layer view to be pushed into the lower end of the spectrum. It makes it hard to distinguish the differences in speed and line width because travel moves influence the spectrum so much. This way, the travel moves only influence the spectrum if they are visible. If they are visible, it might be relevant to the user. Otherwise, the user gets the full spectrum to differentiate between all the line widths and speeds. This currently doesn't update correctly yet. That is something we'll need to fix.
Cura
Ultimaker Cura is a state-of-the-art slicer application to prepare your 3D models for printing with a 3D printer. With hundreds of settings and hundreds of community-managed print profiles, Ultimaker Cura is sure to lead your next project to a success.
Logging Issues
For crashes and similar issues, please attach the following information:
- (On Windows) The log as produced by dxdiag (start -> run -> dxdiag -> save output)
- The Cura GUI log file, located at
%APPDATA%\cura\<Cura version>\cura.log(Windows), or usuallyC:\Users\\<your username>\AppData\Roaming\cura\<Cura version>\cura.log$USER/Library/Application Support/cura/<Cura version>/cura.log(OSX)$USER/.local/share/cura/<Cura version>/cura.log(Ubuntu/Linux)
If the Cura user interface still starts, you can also reach this directory from the application menu in Help -> Show settings folder
For additional support, you could also ask in the #cura channel on FreeNode IRC. For help with development, there is also the #cura-dev channel.
Dependencies
- Uranium Cura is built on top of the Uranium framework.
- CuraEngine This will be needed at runtime to perform the actual slicing.
- fdm_materials Required to load a printer that has swappable material profiles.
- PySerial Only required for USB printing support.
- python-zeroconf Only required to detect mDNS-enabled printers.
Build scripts
Please check out cura-build for detailed building instructions.
Running from Source
Please check our Wiki page for details about running Cura from source.
Plugins
Please check our Wiki page for details about creating and using plugins.
Supported printers
Please check our Wiki page for guidelines about adding support for new machines.
Configuring Cura
Please check out Wiki page about configuration options for developers.
Translating Cura
Please check out Wiki page about how to translate Cura into other languages.
License
Cura is released under the terms of the LGPLv3 or higher. A copy of this license should be included with the software.