mirror of
https://git.mirrors.martin98.com/https://github.com/Ultimaker/Cura
synced 2025-08-06 00:46:02 +08:00
cf922295db
A lot was changed in support. The short of it is that we now think towers should be on by default, but aren't _completely_ certain about it. It makes more sense to do make this change before the beta rather than just before stable, so we have a chance to revert should it prove disastrous.
109 lines
5.4 KiB
JSON
109 lines
5.4 KiB
JSON
{
|
|
"version": 2,
|
|
"name": "Eryone ER20",
|
|
"inherits": "fdmprinter",
|
|
"metadata":
|
|
{
|
|
"visible": true,
|
|
"author": "Eryone3d",
|
|
"manufacturer": "Eryone",
|
|
"file_formats": "text/x-gcode",
|
|
"platform": "eryone_er20_plateform.stl",
|
|
"has_machine_quality": true,
|
|
"machine_extruder_trains": { "0": "eryone_er20_extruder_0" },
|
|
"preferred_quality_type": "high"
|
|
},
|
|
"overrides":
|
|
{
|
|
"acceleration_enabled": { "value": true },
|
|
"acceleration_travel": { "value": 1800 },
|
|
"adhesion_type": { "value": "'brim'" },
|
|
"bottom_layers": { "value": "4" },
|
|
"bottom_thickness": { "value": "layer_height * 4" },
|
|
"brim_width": { "value": 5 },
|
|
"cool_fan_full_at_height": { "value": 0.5 },
|
|
"cool_fan_speed": { "value": 100 },
|
|
"cool_fan_speed_0": { "value": 100 },
|
|
"default_material_bed_temperature": { "value": 60 },
|
|
"default_material_print_temperature": { "value": 205 },
|
|
"gantry_height": { "value": "0" },
|
|
"infill_before_walls": { "value": false },
|
|
"infill_overlap":
|
|
{
|
|
"maximum_value_warning": 100,
|
|
"minimum_value_warning": -50,
|
|
"value": "25 if infill_sparse_density < 95 and infill_pattern != 'concentric' else 0"
|
|
},
|
|
"infill_pattern": { "value": "'grid'" },
|
|
"infill_sparse_density": { "value": 20 },
|
|
"initial_layer_line_width_factor": { "value": 105 },
|
|
"machine_center_is_zero": { "default_value": false },
|
|
"machine_depth": { "default_value": 220 },
|
|
"machine_end_gcode": { "default_value": "G91 ;Relative positioning\nG1 Z5 F720 ;Raise Z\nG1 E-5 F300 ;Retract a bit to protect nozzle\nM104 S0 ;Turn off extruder\nM140 S0 ;Turn off bed\nM107 ;Turn off all fans\nG90 ;Absolute positioning\nG1 X230 Y200 F4800 ;Parking the hotend\nM84 X Y E ;All steppers off but left Z\n" },
|
|
"machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
|
|
"machine_head_with_fans_polygon":
|
|
{
|
|
"default_value": [
|
|
[-10, -10],
|
|
[-10, 10],
|
|
[10, 10],
|
|
[10, -10]
|
|
]
|
|
},
|
|
"machine_heated_bed": { "default_value": true },
|
|
"machine_height": { "default_value": 200 },
|
|
"machine_name": { "default_value": "Eryone ER20" },
|
|
"machine_start_gcode": { "default_value": "G21 ;Metric values\nG90 ;Absolute positioning\nM82 ;Set extruder to absolute mode\nM107 ;Start with the fan off\nG28 ;Homing the hotend\nG29 ;Auto bed leveling detecting\nG92 E0 ;Reset the extruded length\nG1 F200 E3 ;Extrude 3mm of filament\nG92 E0 ;Reset the extruded length again\nG1 Y-3 F1200 ;Move y axis to prime\nG1 X150 F6000 ;Move x axis to prime\nG1 Z0.2 F720 ;Move z axis to prime\nG1 X80.0 E8.0 F900 ;Prime line\nG1 X20.0 E10.0 F700 ;Prime line\nG92 E0 ;Reset the extruded length\nG5 ;Enable resume from power failure\nM117 Printing...\n" },
|
|
"machine_width": { "default_value": 250 },
|
|
"material_bed_temperature_layer_0": { "value": 65 },
|
|
"material_final_print_temperature": { "value": 205 },
|
|
"material_initial_print_temperature": { "value": 205 },
|
|
"material_print_temperature_layer_0": { "value": 215 },
|
|
"optimize_wall_printing_order": { "default_value": true },
|
|
"retract_at_layer_change": { "value": true },
|
|
"retraction_amount": { "default_value": 4 },
|
|
"retraction_combing": { "value": "'noskin'" },
|
|
"retraction_hop": { "value": 0.075 },
|
|
"retraction_hop_enabled": { "value": false },
|
|
"retraction_hop_only_when_collides": { "value": true },
|
|
"retraction_min_travel": { "value": 1.5 },
|
|
"retraction_prime_speed":
|
|
{
|
|
"maximum_value_warning": 130,
|
|
"value": "math.ceil(retraction_speed * 0.4)"
|
|
},
|
|
"retraction_retract_speed": { "maximum_value_warning": 130 },
|
|
"retraction_speed":
|
|
{
|
|
"default_value": 85,
|
|
"maximum_value_warning": 100
|
|
},
|
|
"skin_overlap": { "value": 10 },
|
|
"skirt_brim_speed": { "value": 40 },
|
|
"skirt_gap": { "value": 5 },
|
|
"skirt_line_count": { "value": 3 },
|
|
"smooth_spiralized_contours": { "value": false },
|
|
"speed_layer_0": { "value": "20" },
|
|
"speed_topbottom": { "value": "math.ceil(speed_print * 20 / 50)" },
|
|
"speed_travel": { "value": "150" },
|
|
"speed_wall": { "value": "speed_print" },
|
|
"speed_wall_0": { "value": "math.ceil(speed_print * 30 / 50)" },
|
|
"speed_wall_x": { "value": "speed_print" },
|
|
"support_angle": { "value": 50 },
|
|
"support_enable": { "default_value": false },
|
|
"support_interface_enable": { "value": true },
|
|
"support_pattern": { "value": "'triangles'" },
|
|
"support_roof_enable": { "value": true },
|
|
"support_type": { "value": "'everywhere'" },
|
|
"support_xy_distance": { "value": 0.7 },
|
|
"support_xy_distance_overhang": { "value": 0.2 },
|
|
"support_z_distance": { "value": 0.3 },
|
|
"top_layers": { "value": "5" },
|
|
"top_thickness": { "value": "layer_height * 5" },
|
|
"travel_retract_before_outer_wall": { "value": true },
|
|
"wall_line_count": { "value": 3 },
|
|
"wall_thickness": { "value": "1.2" },
|
|
"z_seam_corner": { "value": "'z_seam_corner_inner'" },
|
|
"z_seam_type": { "value": "'shortest'" }
|
|
}
|
|
} |