mirror of
https://git.mirrors.martin98.com/https://github.com/Ultimaker/Cura
synced 2025-08-15 22:15:52 +08:00
9dea00e399
S6/S8: Set xy_offset to 0.1mm to compensate (cyclinder outer walls 0.2mm to small)
S6/S8: Travel speed to 500mm/s (this is PP-606)
S6/S8: Maximum first layer speed is 50mm/s to improve adhesion reliability and bottom layer quality
PLA: Reduce intial and final nozzle temperature with 10C (195C) to reduce oozing on model
PETG: Unretract speed from 45mm/s to 15mm/s to reduce bubbles in the walls
PVA: Increase prime tower purge volume from 10.0mm3 to 20mm3 to improve tower stability (esp in combi with high temp model materials)
PC and CPE+: Reduce warping
- Alternating wall
- 10C higher nozzle temperature (PC:290C, CPE+: 280C) to remelt the line below
- Keep initial and final temperature the same
- 5C higher bed temperature (PC:115C, CPE+: 280C) to increase bed adhesion
- Chamber temperature 50C (max value S line)
PP-625
Ultimaker Cura
State-of-the-art slicer app to prepare
your 3D models for your 3D printer.
With hundreds of settings & community-managed print profiles,
Ultimaker Cura is sure to lead your next project to a success.
Contribute Printer Profiles? -- Please look here first.
Contribute Translations? -- Please look here first.
