mirror of
https://git.mirrors.martin98.com/https://github.com/Ultimaker/Cura
synced 2025-06-29 20:15:14 +08:00
4b4f971222
This should make it a bit easier for others to create a new definition since there is less for them to 'have to know'. Previously they would be required to fill in as category Other, but now they can just leave the category out.
88 lines
3.1 KiB
JSON
88 lines
3.1 KiB
JSON
{
|
|
"id": "bq_witbox",
|
|
"version": 2,
|
|
"name": "BQ Witbox",
|
|
"inherits": "fdmprinter",
|
|
"metadata": {
|
|
"visible": true,
|
|
"author": "BQ",
|
|
"manufacturer": "BQ",
|
|
"file_formats": "text/x-gcode",
|
|
"platform": "bq_witbox_platform.stl",
|
|
"platform_offset": [ 0, -145, -38]
|
|
},
|
|
|
|
"overrides": {
|
|
"machine_name": { "default_value": "BQ Witbox" },
|
|
"machine_start_gcode": {
|
|
"default_value": "; -- START GCODE --\nG21 ;set units to millimetres\nG90 ;set to absolute positioning\nM106 S0 ;set fan speed to zero (turned off)\nG28 X0 Y0 ;move to the X/Y origin (Home)\nG28 Z0 ;move to the Z origin (Home)\nG1 Z15.0 F1200 ;move Z to position 15.0 mm\nG92 E0 ;zero the extruded length\nG1 E20 F200 ;extrude 20mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F7200 ;set feedrate to 120 mm/s\n; -- end of START GCODE --"
|
|
},
|
|
"machine_end_gcode": {
|
|
"default_value": "; -- END GCODE --\nM104 S0 ;set extruder temperature to zero (turned off)\nG91 ;set to relative positioning\nG1 E-20 F300 ;retract the filament a bit to release some of the pressure\nG90 ;set to absolute positioning\nG1 Z200 ;move the platform to the bottom\nG28 X0 Y0 ;move to the X/Y origin (Home)\nM84 ;turn off steppers\n; -- end of END GCODE --"
|
|
},
|
|
"machine_width": {
|
|
"default_value": 297
|
|
},
|
|
"machine_depth": {
|
|
"default_value": 210
|
|
},
|
|
"machine_height": {
|
|
"default_value": 200
|
|
},
|
|
"machine_heated_bed": {
|
|
"default_value": false
|
|
},
|
|
"machine_center_is_zero": {
|
|
"default_value": false
|
|
},
|
|
"machine_gcode_flavor": {
|
|
"default_value": "RepRap (Marlin/Sprinter)"
|
|
},
|
|
"layer_height": {
|
|
"default_value": 0.2
|
|
},
|
|
"layer_height_0": {
|
|
"default_value": 0.2
|
|
},
|
|
"wall_thickness": {
|
|
"default_value": 1
|
|
},
|
|
"top_bottom_thickness": {
|
|
"default_value": 1
|
|
},
|
|
"bottom_thickness": {
|
|
"default_value": 1
|
|
},
|
|
"material_print_temperature": {
|
|
"default_value": 220
|
|
},
|
|
"material_bed_temperature": {
|
|
"default_value": 0
|
|
},
|
|
"material_diameter": {
|
|
"default_value": 1.75
|
|
},
|
|
"speed_print": {
|
|
"default_value": 40
|
|
},
|
|
"speed_infill": {
|
|
"default_value": 40
|
|
},
|
|
"speed_wall": {
|
|
"default_value": 35
|
|
},
|
|
"speed_topbottom": {
|
|
"default_value": 35
|
|
},
|
|
"speed_travel": {
|
|
"default_value": 120
|
|
},
|
|
"speed_layer_0": {
|
|
"default_value": 20
|
|
},
|
|
"support_enable": {
|
|
"default_value": true
|
|
}
|
|
|
|
}
|
|
} |