mirror of
https://git.mirrors.martin98.com/https://github.com/Ultimaker/Cura
synced 2025-08-05 20:46:11 +08:00
ec00e5b721
Also convert the values for prime_tower_min_volume to make it behave similar to what the minimum volume used to be. This feature fixed a bug with the computation from volume to thickness. Now it's correct but we have to correct the old values to be still the same (approximately) as what used to be the end result. Contributes to issue CURA-5457.
72 lines
1.5 KiB
INI
72 lines
1.5 KiB
INI
[general]
|
|
version = 4
|
|
name = gMax 1.5+ Dual Thin Layers
|
|
definition = gmax15plus_dual
|
|
|
|
[metadata]
|
|
setting_version = 5
|
|
type = quality
|
|
quality_type = high
|
|
weight = 0
|
|
|
|
[values]
|
|
layer_height = 0.16
|
|
layer_height_0 = 0.2
|
|
|
|
infill_before_walls = False
|
|
infill_overlap = 20
|
|
infill_pattern = grid
|
|
|
|
speed_slowdown_layers = 1
|
|
acceleration_enabled = True
|
|
acceleration_print = 400
|
|
acceleration_travel = 700
|
|
|
|
coasting_enable = False
|
|
coasting_volume = 0.0625
|
|
|
|
retraction_combing = off
|
|
retraction_amount = 0.75
|
|
retraction_speed = 70
|
|
material_flow = 98
|
|
material_diameter = 1.75
|
|
|
|
support_use_towers = False
|
|
support_z_distance = 0.2
|
|
support_xy_distance = 1.5
|
|
support_join_distance = 10
|
|
support_interface_enable = True
|
|
support_interface_pattern = lines
|
|
|
|
adhesion_type = skirt
|
|
skirt_gap = 2
|
|
|
|
cool_fan_speed = 70
|
|
cool_fan_speed_max = 85
|
|
skin_overlap = 10
|
|
speed_print = 40
|
|
speed_infill = =math.ceil(speed_print * 0.85)
|
|
speed_layer_0 = =math.ceil(speed_print * 0.4)
|
|
speed_topbottom = =math.ceil(speed_print * 0.75)
|
|
speed_wall = =math.ceil(speed_print * 0.5)
|
|
speed_wall_x = =math.ceil(speed_print * 0.7)
|
|
|
|
top_bottom_pattern = lines
|
|
top_layers = 4
|
|
top_thickness = 1
|
|
bottom_layers = 2
|
|
wall_line_count = 2
|
|
z_seam_corner = z_seam_corner_none
|
|
|
|
ooze_shield_angle = 20
|
|
ooze_shield_dist = 4
|
|
ooze_shield_enabled = True
|
|
prime_tower_enable = False
|
|
prime_tower_position_x = 350
|
|
prime_tower_position_y = 350
|
|
prime_tower_min_volume = 18
|
|
switch_extruder_retraction_amount = 6
|
|
switch_extruder_retraction_speeds = 60
|
|
|
|
material_standby_temperature = =material_print_temperature - 10
|