mirror of
https://git.mirrors.martin98.com/https://github.com/Ultimaker/Cura
synced 2025-08-05 20:06:06 +08:00
9088ab23f4
In the initial PR for PP-71 I only cleaned up material_final_print_temperatures, but now the material_initial_print_temperatures are also coming into play, so I cleaned those as well. From research for PP-123 I know this is a safe change. Due to this cleanup the cool_min_temperature can now always follow the ultimaker default settings.
44 lines
1.2 KiB
INI
44 lines
1.2 KiB
INI
[general]
|
|
definition = ultimaker_s3
|
|
name = Fine - Experimental
|
|
version = 4
|
|
|
|
[metadata]
|
|
is_experimental = True
|
|
material = generic_pp
|
|
quality_type = normal
|
|
setting_version = 21
|
|
type = quality
|
|
variant = AA 0.25
|
|
weight = 0
|
|
|
|
[values]
|
|
brim_width = 10
|
|
infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral'
|
|
infill_wipe_dist = 0.1
|
|
machine_min_cool_heat_time_window = 15
|
|
material_final_print_temperature = =material_print_temperature - 10
|
|
material_initial_print_temperature = =material_print_temperature - 10
|
|
material_print_temperature = =default_material_print_temperature - 15
|
|
multiple_mesh_overlap = 0
|
|
prime_tower_enable = False
|
|
prime_tower_size = 16
|
|
prime_tower_wipe_enabled = True
|
|
retraction_count_max = 15
|
|
retraction_extra_prime_amount = 0.2
|
|
retraction_hop = 2
|
|
retraction_hop_only_when_collides = True
|
|
retraction_min_travel = 0.8
|
|
retraction_prime_speed = 15
|
|
speed_print = 25
|
|
speed_wall = =math.ceil(speed_print * 25 / 25)
|
|
speed_wall_0 = =math.ceil(speed_wall * 25 / 25)
|
|
support_angle = 50
|
|
switch_extruder_prime_speed = 15
|
|
switch_extruder_retraction_amount = 20
|
|
switch_extruder_retraction_speeds = 35
|
|
top_bottom_thickness = 1
|
|
travel_avoid_distance = 3
|
|
wall_0_inset = 0
|
|
|