mirror of
https://git.mirrors.martin98.com/https://github.com/Ultimaker/Cura
synced 2025-04-28 23:04:34 +08:00
6022ed0f23
There are no changes to these settings, luckily. This target version is now only here for documentation (like source_version was). It is no longer actually used by the code. Contributes to issue CURA-5929.
158 lines
8.7 KiB
JSON
158 lines
8.7 KiB
JSON
{
|
|
"source_version": "15.04",
|
|
"target_version": "4.5",
|
|
|
|
"translation": {
|
|
"machine_nozzle_size": "nozzle_size",
|
|
"line_width": "wall_thickness if (spiralize == \"True\" or simple_mode == \"True\") else (nozzle_size if (float(wall_thickness) < 0.01) else (wall_thickness if (float(wall_thickness) < float(nozzle_size)) else (nozzle_size if ((int(float(wall_thickness) / (float(nozzle_size) - 0.0001))) == 0) else ((float(wall_thickness) / ((int(float(wall_thickness) / (float(nozzle_size) - 0.0001))) + 1)) if ((float(wall_thickness) / (int(float(wall_thickness) / (float(nozzle_size) - 0.0001)))) > float(nozzle_size) * 1.5) else ((float(wall_thickness) / (int(float(wall_thickness) / (float(nozzle_size) - 0.0001)))))))))",
|
|
"layer_height": "layer_height",
|
|
"layer_height_0": "bottom_thickness",
|
|
"wall_thickness": "wall_thickness",
|
|
"top_thickness": "0 if (solid_top == \"False\") else solid_layer_thickness",
|
|
"bottom_thickness": "0 if (solid_bottom == \"False\") else solid_layer_thickness",
|
|
"infill_sparse_density": "fill_density",
|
|
"infill_overlap": "fill_overlap",
|
|
"infill_before_walls": "False if (perimeter_before_infill == \"True\") else True",
|
|
"material_print_temperature": "print_temperature",
|
|
"material_bed_temperature": "print_bed_temperature",
|
|
"material_diameter": "filament_diameter",
|
|
"material_flow": "filament_flow",
|
|
"retraction_enable": "retraction_enable",
|
|
"retraction_amount": "retraction_amount",
|
|
"retraction_speed": "retraction_speed",
|
|
"retraction_min_travel": "retraction_min_travel",
|
|
"retraction_hop_enabled": "retraction_hop != 0",
|
|
"speed_print": "print_speed",
|
|
"speed_infill": "infill_speed if (float(infill_speed) != 0) else print_speed",
|
|
"speed_wall_0": "inset0_speed if (float(inset0_speed) != 0) else print_speed",
|
|
"speed_wall_x": "insetx_speed if (float(insetx_speed) != 0) else print_speed",
|
|
"speed_topbottom": "solidarea_speed if (float(solidarea_speed) != 0) else print_speed",
|
|
"speed_travel": "travel_speed if (float(travel_speed) != 0) else travel_speed",
|
|
"speed_layer_0": "bottom_layer_speed",
|
|
"retraction_combing": "\"all\" if retraction_combing == \"All\" else \"noskin\" if retraction_combing == \"No Skin\" else \"off\"",
|
|
"cool_fan_enabled": "fan_enabled",
|
|
"cool_fan_speed_min": "fan_speed",
|
|
"cool_fan_speed_max": "fan_speed_max",
|
|
"cool_fan_full_at_height": "fan_full_height",
|
|
"cool_min_layer_time": "cool_min_layer_time",
|
|
"cool_min_speed": "cool_min_feedrate",
|
|
"cool_lift_head": "cool_head_lift",
|
|
"support_enable": "False if (support == \"None\") else True",
|
|
"support_type": "\"buildplate\" if (support == \"Touching buildplate\") else \"everywhere\"",
|
|
"support_angle": "support_angle",
|
|
"support_xy_distance": "support_xy_distance",
|
|
"support_z_distance": "support_z_distance",
|
|
"support_pattern": "support_type.lower()",
|
|
"support_infill_rate": "support_fill_rate",
|
|
"adhesion_type": "\"skirt\" if (platform_adhesion == \"None\") else platform_adhesion.lower()",
|
|
"skirt_line_count": "skirt_line_count",
|
|
"skirt_gap": "skirt_gap",
|
|
"skirt_brim_minimal_length": "skirt_minimal_length",
|
|
"brim_line_count": "brim_line_count",
|
|
"raft_margin": "raft_margin",
|
|
"raft_airgap": "float(raft_airgap_all) + float(raft_airgap)",
|
|
"layer_0_z_overlap": "raft_airgap",
|
|
"raft_surface_layers": "raft_surface_layers",
|
|
"raft_surface_thickness": "raft_surface_thickness",
|
|
"raft_surface_line_width": "raft_surface_linewidth",
|
|
"raft_surface_line_spacing": "raft_line_spacing",
|
|
"raft_interface_thickness": "raft_interface_thickness",
|
|
"raft_interface_line_width": "raft_interface_linewidth",
|
|
"raft_interface_line_spacing": "raft_line_spacing",
|
|
"raft_base_thickness": "raft_base_thickness",
|
|
"raft_base_line_width": "raft_base_linewidth",
|
|
"raft_base_line_spacing": "raft_line_spacing",
|
|
"meshfix_union_all": "fix_horrible_union_all_type_a",
|
|
"meshfix_union_all_remove_holes": "fix_horrible_union_all_type_b",
|
|
"meshfix_extensive_stitching": "fix_horrible_extensive_stitching",
|
|
"meshfix_keep_open_polygons": "fix_horrible_use_open_bits",
|
|
"magic_mesh_surface_mode": "\"surface\" if simple_mode else \"normal\"",
|
|
"magic_spiralize": "spiralize",
|
|
"prime_tower_enable": "wipe_tower",
|
|
"prime_tower_size": "math.sqrt(float(wipe_tower_volume) / float(layer_height))",
|
|
"ooze_shield_enabled": "ooze_shield",
|
|
"skin_overlap": "fill_overlap"
|
|
},
|
|
|
|
"defaults": {
|
|
"bottom_layer_speed": "20",
|
|
"bottom_thickness": "0.3",
|
|
"brim_line_count": "20",
|
|
"cool_head_lift": "False",
|
|
"cool_min_feedrate": "10",
|
|
"cool_min_layer_time": "5",
|
|
"fan_enabled": "True",
|
|
"fan_full_height": "0.5",
|
|
"fan_speed": "100",
|
|
"fan_speed_max": "100",
|
|
"filament_diameter": "2.85",
|
|
"filament_diameter2": "0",
|
|
"filament_diameter3": "0",
|
|
"filament_diameter4": "0",
|
|
"filament_diameter5": "0",
|
|
"filament_flow": "100.0",
|
|
"fill_density": "20",
|
|
"fill_overlap": "15",
|
|
"fix_horrible_extensive_stitching": "False",
|
|
"fix_horrible_union_all_type_a": "True",
|
|
"fix_horrible_union_all_type_b": "False",
|
|
"fix_horrible_use_open_bits": "False",
|
|
"infill_speed": "0.0",
|
|
"inset0_speed": "0.0",
|
|
"insetx_speed": "0.0",
|
|
"layer_height": "0.1",
|
|
"layer0_width_factor": "100",
|
|
"nozzle_size": "0.4",
|
|
"object_sink": "0.0",
|
|
"ooze_shield": "False",
|
|
"overlap_dual": "0.15",
|
|
"perimeter_before_infill": "False",
|
|
"platform_adhesion": "None",
|
|
"print_bed_temperature": "70",
|
|
"print_speed": "50",
|
|
"print_temperature": "210",
|
|
"print_temperature2": "0",
|
|
"print_temperature3": "0",
|
|
"print_temperature4": "0",
|
|
"print_temperature5": "0",
|
|
"raft_airgap": "0.22",
|
|
"raft_airgap_all": "0.0",
|
|
"raft_base_linewidth": "1.0",
|
|
"raft_base_thickness": "0.3",
|
|
"raft_interface_linewidth": "0.4",
|
|
"raft_interface_thickness": "0.27",
|
|
"raft_line_spacing": "3.0",
|
|
"raft_margin": "5.0",
|
|
"raft_surface_layers": "2",
|
|
"raft_surface_linewidth": "0.4",
|
|
"raft_surface_thickness": "0.27",
|
|
"retraction_amount": "4.5",
|
|
"retraction_combing": "All",
|
|
"retraction_dual_amount": "16.5",
|
|
"retraction_enable": "True",
|
|
"retraction_hop": "0.0",
|
|
"retraction_min_travel": "1.5",
|
|
"retraction_minimal_extrusion": "0.02",
|
|
"retraction_speed": "40.0",
|
|
"simple_mode": "False",
|
|
"skirt_gap": "3.0",
|
|
"skirt_line_count": "1",
|
|
"skirt_minimal_length": "150.0",
|
|
"solid_bottom": "True",
|
|
"solid_layer_thickness": "0.6",
|
|
"solid_top": "True",
|
|
"solidarea_speed": "0.0",
|
|
"spiralize": "False",
|
|
"support": "None",
|
|
"support_angle": "60",
|
|
"support_dual_extrusion": "Both",
|
|
"support_fill_rate": "15",
|
|
"support_type": "Lines",
|
|
"support_xy_distance": "0.7",
|
|
"support_z_distance": "0.15",
|
|
"travel_speed": "150.0",
|
|
"wall_thickness": "0.8",
|
|
"wipe_tower": "False",
|
|
"wipe_tower_volume": "15"
|
|
}
|
|
} |