mirror of
https://git.mirrors.martin98.com/https://github.com/Ultimaker/Cura
synced 2025-04-28 23:04:34 +08:00
82570ee35f
* Getting a rid of M800: This removes M800 completely. The problem is basically that M800 sets the temperature to 200deg. As a result we tell the firmware to heat up to e.g. 205deg, then M800 kicks in and sets the temperature to 200deg and then we heat up to 205deg again. Therefore I looked into the firmware and extracted all g-code lines except the one which tells to go to 200deg. * Getting independent of bq's fork and therefore adding compatibility to Marlin We use standard g-code, which is safe to be used with both firmware. Note: This change might be also interesting for other bq products, but can't test on them. Therefore it is up to bq and/or the owners of these products to contribute and correct this here, as I did.
50 lines
2.4 KiB
JSON
50 lines
2.4 KiB
JSON
{
|
|
"version": 2,
|
|
"name": "BQ Hephestos 2",
|
|
"inherits": "fdmprinter",
|
|
"metadata": {
|
|
"visible": true,
|
|
"author": "BQ",
|
|
"manufacturer": "BQ",
|
|
"platform": "bq_hephestos_2_platform.stl",
|
|
"platform_offset": [6, 1320, 0 ],
|
|
"file_formats": "text/x-gcode",
|
|
"machine_extruder_trains":
|
|
{
|
|
"0": "bq_hephestos_2_extruder_0"
|
|
}
|
|
},
|
|
|
|
"overrides": {
|
|
"machine_name": { "default_value": "BQ Hephestos 2" },
|
|
"machine_start_gcode": { "default_value": "; -- START GCODE --\nM104 S{material_print_temperature}\nG28 ; Zero-ing position\nG29 ; Auto bed-leveling\nG0 X4 Y297 Z15 F4000 ; Fast move to BQ's start position\nG90 ; Set to Absolute Positioning\nG92 E0 ; Reset extruder 0\nG1 F1800 ; Set default feedrate\nM109 S{material_print_temperature} ; Makes sure the temperature is correct before printing\n; -- end of START GCODE --" },
|
|
"machine_end_gcode": { "default_value": "; -- END GCODE --\nM801 ; Marlin G-CODE to fire end print procedure\n; -- end of END GCODE --" },
|
|
"machine_width": { "default_value": 210 },
|
|
"machine_depth": { "default_value": 297 },
|
|
"machine_height": { "default_value": 220 },
|
|
"machine_heated_bed": { "default_value": false },
|
|
"machine_center_is_zero": { "default_value": false },
|
|
"material_print_temperature": { "default_value": 210 },
|
|
"material_bed_temperature": { "default_value": 0 },
|
|
"layer_height": { "default_value": 0.2 },
|
|
"layer_height_0": { "default_value": 0.2 },
|
|
"wall_line_count": { "default_value": 3 },
|
|
"wall_thickness": { "default_value": 1.2 },
|
|
"top_bottom_thickness": { "default_value": 1.2 },
|
|
"infill_sparse_density": { "default_value": 20 },
|
|
"infill_overlap": { "default_value": 15 },
|
|
"speed_print": { "default_value": 60 },
|
|
"speed_travel": { "default_value": 160 },
|
|
"speed_layer_0": { "default_value": 30 },
|
|
"speed_wall_x": { "default_value": 35 },
|
|
"speed_wall_0": { "default_value": 30 },
|
|
"speed_infill": { "default_value": 80 },
|
|
"speed_topbottom": { "default_value": 35 },
|
|
"skirt_brim_speed": { "default_value": 35 },
|
|
"skirt_line_count": { "default_value": 4 },
|
|
"skirt_brim_minimal_length": { "default_value": 30 },
|
|
"skirt_gap": { "default_value": 6 },
|
|
"cool_fan_full_at_height": { "default_value": 0.4 }
|
|
}
|
|
}
|