mirror of
https://git.mirrors.martin98.com/https://github.com/Ultimaker/Cura
synced 2025-04-28 23:04:34 +08:00
e26e825d83
Because the default in fdmprinter has a formula in the value, the default_value properties wouldn't get used any more.
71 lines
4.3 KiB
JSON
71 lines
4.3 KiB
JSON
{
|
|
"version": 2,
|
|
"name": "FABtotum Personal Fabricator",
|
|
"inherits": "fdmprinter",
|
|
"metadata": {
|
|
"visible": true,
|
|
"author": "FABtotum",
|
|
"manufacturer": "FABtotum",
|
|
"category": "Other",
|
|
"file_formats": "text/x-gcode",
|
|
"platform": "fabtotum_platform.stl",
|
|
"has_machine_quality": true,
|
|
"has_variants": true,
|
|
"variants_name": "Head",
|
|
"preferred_variant_name": "Lite 0.4 mm",
|
|
"preferred_material": "fabtotum_pla",
|
|
"supports_usb_connection": false,
|
|
"machine_extruder_trains":
|
|
{
|
|
"0": "fabtotum_extruder_0"
|
|
}
|
|
},
|
|
"overrides": {
|
|
"machine_name": { "default_value": "FABtotum Personal Fabricator" },
|
|
"machine_start_gcode": {
|
|
"default_value": ";Layer height: {layer_height}\n;Walls: {wall_thickness}\n;Fill: {infill_sparse_density}\n;Top\\Bottom Thickness: {top_bottom_thickness}\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nG4 S1 ;1 millisecond pause to buffer the bep bep \nM300 S2 ;FAB bep bep (start the print, go check the oozing and skirt lines adesion) \nG4 S1 ;1 second pause to reach the printer (run fast)\nG92 E0 ;zero the extruded length \nG1 F200 E35 ;slowly extrude 35mm of filament to clean the nozzle and build up extrusion pressure \nG92 E0 ;zero the extruded length again \n;print"
|
|
},
|
|
"machine_end_gcode": {
|
|
"default_value": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-3 X+5 Y+5 F5000 ;move Z up a bit and retract filament even more\n;end of the print\nM84 ;steppers off\nG90 ;absolute positioning\nM300 S2 ;FAB bep bep (end print)"
|
|
},
|
|
"gantry_height": { "value": "55" },
|
|
"machine_width": { "default_value": 214 },
|
|
"machine_height": { "default_value": 241.5 },
|
|
"machine_depth": { "default_value": 234 },
|
|
"machine_center_is_zero": { "default_value": false },
|
|
"machine_heated_bed": { "default_value": true },
|
|
"machine_head_with_fans_polygon": { "default_value": [[-75, 35], [-75, -18], [18, 35], [18, -18]] },
|
|
"machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
|
|
"machine_max_feedrate_x": { "default_value": 250 },
|
|
"machine_max_feedrate_y": { "default_value": 250 },
|
|
"machine_max_feedrate_z": { "default_value": 15 },
|
|
"machine_max_acceleration_x": { "default_value": 10000 },
|
|
"machine_max_acceleration_y": { "default_value": 10000 },
|
|
"machine_max_acceleration_z": { "default_value": 50 },
|
|
"machine_max_acceleration_e": { "default_value": 100 },
|
|
"machine_acceleration": { "default_value": 4000 },
|
|
"machine_max_jerk_xy": { "default_value": 25.0 },
|
|
"machine_max_jerk_z": { "default_value": 0.4 },
|
|
"machine_max_jerk_e": { "default_value": 1.0 },
|
|
"retraction_hop_enabled": { "default_value": false },
|
|
"material_final_print_temperature": { "value": "material_print_temperature - 5" },
|
|
"material_initial_print_temperature": { "value": "material_print_temperature" },
|
|
"travel_avoid_distance": { "default_value": 1, "value": 1 },
|
|
"speed_travel": { "default_value": 200, "value": 200 },
|
|
"speed_infill": { "value": "round(speed_print * 1.05, 0)" },
|
|
"speed_topbottom": { "value": "round(speed_print * 0.95, 0)" },
|
|
"speed_wall": { "value": "speed_print" },
|
|
"speed_wall_0": { "value": "round(speed_print * 0.9, 0)" },
|
|
"speed_wall_x": { "value": "speed_wall" },
|
|
"speed_layer_0": { "value": "min(round(speed_print * 0.75, 0), 45.0)" },
|
|
"speed_travel_layer_0": { "value": "round(speed_travel * 0.7, 0)" },
|
|
"skirt_brim_speed": { "value": "speed_layer_0" },
|
|
"skirt_line_count": { "default_value": 3 },
|
|
"skirt_brim_minimal_length": { "default_value": 150 },
|
|
"infill_sparse_density": { "default_value": 24 },
|
|
"top_bottom_thickness": { "default_value": 0.6 },
|
|
"support_z_distance": { "default_value": 0.2, "value": "min(2 * layer_height, machine_nozzle_size * 0.75)" },
|
|
"support_interface_enable": { "default_value": true }
|
|
}
|
|
}
|