mirror of
https://git.mirrors.martin98.com/https://github.com/Ultimaker/Cura
synced 2025-04-28 23:04:34 +08:00
e26e825d83
Because the default in fdmprinter has a formula in the value, the default_value properties wouldn't get used any more.
57 lines
3.5 KiB
JSON
57 lines
3.5 KiB
JSON
{
|
|
"id": "gmax15plus_dual",
|
|
"version": 2,
|
|
"name": "gMax 1.5 Plus Dual Extruder",
|
|
"inherits": "fdmprinter",
|
|
"metadata": {
|
|
"visible": true,
|
|
"author": "GTL_180109",
|
|
"manufacturer": "gCreate",
|
|
"category": "Other",
|
|
"file_formats": "text/x-gcode",
|
|
"platform": "gmax_1-5_xt-plus_s3d_full model_150707.stl",
|
|
"has_variants": true,
|
|
"variants_name": "Hotend",
|
|
"preferred_variant_name": "0.5mm E3D (Default)",
|
|
"preferred_quality_type": "gmax15plus_global_dual_normal",
|
|
"machine_extruder_trains": {
|
|
"0": "gmax15plus_dual_extruder_0",
|
|
"1": "gmax15plus_dual_extruder_1"
|
|
}
|
|
},
|
|
|
|
"overrides": {
|
|
"machine_name": { "default_value": "gMax 1.5 Plus Dual Extruder" },
|
|
"machine_extruder_count": { "default_value": 2 },
|
|
"machine_heated_bed": { "default_value": false },
|
|
"machine_width": { "default_value": 406 },
|
|
"machine_depth": { "default_value": 406 },
|
|
"machine_height": { "default_value": 533 },
|
|
"machine_center_is_zero": { "default_value": false },
|
|
"material_diameter": { "default_value": 1.75 },
|
|
"machine_nozzle_size": { "default_value": 0.5 },
|
|
"layer_height": { "default_value": 0.2 },
|
|
"layer_height_0": { "default_value": 0.3 },
|
|
"retraction_amount": { "default_value": 1 },
|
|
"retraction_speed": { "default_value": 70},
|
|
"adhesion_type": { "default_value": "skirt" },
|
|
"gantry_height": { "value": "50" },
|
|
"speed_print": { "default_value": 50 },
|
|
"speed_travel": { "default_value": 70 },
|
|
"machine_max_acceleration_x": { "default_value": 600 },
|
|
"machine_max_acceleration_y": { "default_value": 600 },
|
|
"machine_max_acceleration_z": { "default_value": 30 },
|
|
"machine_max_acceleration_e": { "default_value": 10000 },
|
|
"machine_max_jerk_xy": { "default_value": 8 },
|
|
"machine_max_jerk_z": { "default_value": 0.4 },
|
|
"machine_max_jerk_e": { "default_value": 5.0 },
|
|
"machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
|
|
"machine_start_gcode": { "default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 ;Home X/Y/Z\nM104 S{material_print_temperature} T0 ; Preheat Left Extruder\nM104 S{material_print_temperature} T1 ; Preheat Right Extruder\nM109 S{material_print_temperature} T0 ; Preheat Left Extruder\nM109 S{material_print_temperature} T1 ; Preheat Right Extruder\nG91 ;relative positioning\nG90 ;absolute positioning\nM218 T1 X34.3 Y0; Set 2nd extruder offset. This can be changed later if needed\nG1 Z25.0 F9000 ;raise nozzle 25mm\nG92 E0 ;zero the extruded length again\nG1 F9000\n;Put printing message on LCD screen\nM117 Printing..." },
|
|
"machine_end_gcode": { "default_value": "M104 S0 T0;Left extruder off\nM104 S0 T1; Right extruder off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning" },
|
|
"material_print_temperature": { "default_value": 202 },
|
|
"wall_thickness": { "default_value": 1 },
|
|
"top_bottom_thickness": { "default_value": 1 },
|
|
"bottom_thickness": { "default_value": 1 }
|
|
}
|
|
}
|