mirror of
https://git.mirrors.martin98.com/https://github.com/Ultimaker/Cura
synced 2025-04-28 23:04:34 +08:00
e26e825d83
Because the default in fdmprinter has a formula in the value, the default_value properties wouldn't get used any more.
53 lines
2.2 KiB
JSON
53 lines
2.2 KiB
JSON
{
|
|
"version": 2,
|
|
"name": "German RepRap Neo",
|
|
"inherits": "fdmprinter",
|
|
"metadata": {
|
|
"visible": true,
|
|
"author": "Simon Cor",
|
|
"manufacturer": "German RepRap",
|
|
"file_formats": "text/x-gcode",
|
|
"platform": "grr_neo_platform.stl",
|
|
"machine_extruder_trains":
|
|
{
|
|
"0": "grr_neo_extruder_0"
|
|
}
|
|
},
|
|
|
|
"overrides": {
|
|
"machine_name": { "default_value": "German RepRap Neo" },
|
|
"machine_width": {
|
|
"default_value": 150
|
|
},
|
|
"machine_height": {
|
|
"default_value": 150
|
|
},
|
|
"machine_depth": {
|
|
"default_value": 150
|
|
},
|
|
"machine_center_is_zero": {
|
|
"default_value": false
|
|
},
|
|
"machine_head_polygon": {
|
|
"default_value": [
|
|
[-75, -18],
|
|
[-75, 35],
|
|
[18, 35],
|
|
[18, -18]
|
|
]
|
|
},
|
|
"gantry_height": {
|
|
"value": "55"
|
|
},
|
|
"machine_gcode_flavor": {
|
|
"default_value": "RepRap (Marlin/Sprinter)"
|
|
},
|
|
"machine_start_gcode": {
|
|
"default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG91 ;relative positioning\nG1 Y-10.0000 F9000 ;compensate firmware head move 1cm right after endstop\nG92 Y0 ;zero Y\nG90 ;absolute positioning\nG1 Z15.0 F9000 ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E3 ;extrude 3mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F9000\n;Put printing message on LCD screen\nM117 Printing..."
|
|
},
|
|
"machine_end_gcode": {
|
|
"default_value": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning"
|
|
}
|
|
}
|
|
}
|