mirror of
https://git.mirrors.martin98.com/https://github.com/Ultimaker/Cura
synced 2025-04-28 23:04:34 +08:00
e26e825d83
Because the default in fdmprinter has a formula in the value, the default_value properties wouldn't get used any more.
94 lines
3.3 KiB
JSON
94 lines
3.3 KiB
JSON
{
|
|
"name": "JGAurora Z-603S",
|
|
"version": 2,
|
|
"inherits": "fdmprinter",
|
|
"metadata": {
|
|
"visible": true,
|
|
"author": "Samuel Pinches",
|
|
"manufacturer": "JGAurora",
|
|
"file_formats": "text/x-gcode",
|
|
"preferred_quality_type": "fast",
|
|
"machine_extruder_trains":
|
|
{
|
|
"0": "jgaurora_z_603s_extruder_0"
|
|
}
|
|
},
|
|
"overrides": {
|
|
"machine_name": {
|
|
"default_value": "JGAurora Z-603S"
|
|
},
|
|
"machine_start_gcode": {
|
|
"default_value": "; -- START GCODE --\nG21 ;set units to millimetres\nG90 ;set to absolute positioning\nM106 S0 ;set fan speed to zero (turned off)\nG28 ;home all axis\nM420 S1 ;turn on mesh bed levelling if enabled in firmware\nG92 E0 ;zero the extruded length\nG1 Z1 F1000 ;move up slightly\nG1 X60.0 Z0 E9.0 F1000.0;intro line\nG1 X100.0 E21.5 F1000.0 ;continue line\nG92 E0 ;zero the extruded length again\n; -- end of START GCODE --"
|
|
},
|
|
"machine_end_gcode": {
|
|
"default_value": "; -- END GCODE --\nM104 S0 ;turn off nozzle heater\nM140 S0 ;turn off bed heater\nG91 ;set to relative positioning\nG1 E-10 F300 ;retract the filament slightly\nG90 ;set to absolute positioning\nG28 X0 ;move to the X-axis origin (Home)\nG0 Y280 F600 ;bring the bed to the front for easy print removal\nM84 ;turn off stepper motors\n; -- end of END GCODE --"
|
|
},
|
|
"machine_width": {
|
|
"default_value": 280
|
|
},
|
|
"machine_height": {
|
|
"default_value": 175
|
|
},
|
|
"machine_depth": {
|
|
"default_value": 180
|
|
},
|
|
"machine_heated_bed": {
|
|
"default_value": true
|
|
},
|
|
"machine_center_is_zero": {
|
|
"default_value": false
|
|
},
|
|
"gantry_height": {
|
|
"value": "10"
|
|
},
|
|
"machine_gcode_flavor": {
|
|
"default_value": "RepRap (Marlin/Sprinter)"
|
|
},
|
|
"material_diameter": {
|
|
"default_value": 1.75
|
|
},
|
|
"material_print_temperature": {
|
|
"default_value": 210
|
|
},
|
|
"material_bed_temperature": {
|
|
"default_value": 55
|
|
},
|
|
"layer_height_0": {
|
|
"default_value": 0.2
|
|
},
|
|
"wall_thickness": {
|
|
"default_value": 1.2
|
|
},
|
|
"speed_print": {
|
|
"default_value": 60
|
|
},
|
|
"speed_infill": {
|
|
"default_value": 60
|
|
},
|
|
"speed_wall": {
|
|
"default_value": 30
|
|
},
|
|
"speed_topbottom": {
|
|
"default_value": 45
|
|
},
|
|
"speed_travel": {
|
|
"default_value": 125
|
|
},
|
|
"speed_layer_0": {
|
|
"default_value": 20
|
|
},
|
|
"support_enable": {
|
|
"default_value": true
|
|
},
|
|
"retraction_enable": {
|
|
"default_value": true
|
|
},
|
|
"retraction_amount": {
|
|
"default_value": 5
|
|
},
|
|
"retraction_speed": {
|
|
"default_value": 50
|
|
}
|
|
}
|
|
}
|