mirror of
https://git.mirrors.martin98.com/https://github.com/Ultimaker/Cura
synced 2025-04-28 23:04:34 +08:00
e26e825d83
Because the default in fdmprinter has a formula in the value, the default_value properties wouldn't get used any more.
86 lines
3.2 KiB
JSON
86 lines
3.2 KiB
JSON
{
|
|
"name": "Mendel90",
|
|
"version": 2,
|
|
"inherits": "fdmprinter",
|
|
"metadata":
|
|
{
|
|
"visible": true,
|
|
"author": "Wilmer Gaona",
|
|
"manufacturer": "Nophead",
|
|
"file_formats": "text/x-gcode",
|
|
"platform": "mendel90_platform.stl",
|
|
"platform_offset": [0, -23.6, 0],
|
|
"machine_extruder_trains":
|
|
{
|
|
"0": "mendel90_extruder_0"
|
|
}
|
|
},
|
|
|
|
"pages": [
|
|
"BedLeveling"
|
|
],
|
|
|
|
"overrides": {
|
|
"machine_name": { "default_value": "Mendel90" },
|
|
"machine_start_gcode": {
|
|
"default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;absolute extrusion\nM107 ;start with the fan off\nG28 ;home\nG92 E0 ;zero the extruded length\nM140 S{material_bed_temperature_layer_0} ; set the bed temperature and continue on\nG1 X-50 Y98 F9000 ;go to the left of the top\nG1 Z0.05 ; close to the bed\nM104 S{material_print_temperature_layer_0}; pre-heat the extruder continue on\nM190 S{material_bed_temperature_layer_0} ;set the bed temp & wait\nM109 S{material_print_temperature_layer_0};set the extruder temp for layer 0 & wait\nG92 E0 ;zero the extruded length\nG1 X50 E10 F300 ; make a thick line to prime extruder\nG92 E0 ; reset extruder\nG1 E-4 F1800\nG1 Z0.3 ;lift Z\n"
|
|
},
|
|
"machine_end_gcode": {
|
|
"default_value": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nM107 ;carriage fan off\nG91 ;relative positioning\nG1 Z10 ;Move up Z 10mm\nG90 ;back to absolute mode\nG1 E-1 F1200 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG92 E0 ;zero the extruded length\nG1 Z200 X-100 F9000 ; go to top\nG1 Y100 F5000 ;Move Y to back\nM42 P42 S255 ;Turn on Bed cooling fan on\nG4 S10 ;Wait 10 seconds\nM42 P42 S0 ;Turn off bed cooling fan\nM84 ;steppers off\n"
|
|
},
|
|
"material_bed_temp_wait": {
|
|
"default_value": true
|
|
},
|
|
"material_print_temp_prepend": {
|
|
"default_value": true
|
|
},
|
|
"machine_width": {
|
|
"default_value": 200
|
|
},
|
|
"machine_height": {
|
|
"default_value": 200
|
|
},
|
|
"machine_depth": {
|
|
"default_value": 200
|
|
},
|
|
"machine_heated_bed": {
|
|
"default_value": true
|
|
},
|
|
"machine_center_is_zero": {
|
|
"default_value": true
|
|
},
|
|
"machine_extruder_count": {
|
|
"default_value": 1
|
|
},
|
|
"machine_nozzle_tip_outer_diameter": {
|
|
"default_value": 1
|
|
},
|
|
"machine_nozzle_head_distance": {
|
|
"default_value": 5
|
|
},
|
|
"machine_nozzle_expansion_angle": {
|
|
"default_value": 45
|
|
},
|
|
"machine_heat_zone_length": {
|
|
"default_value": 16
|
|
},
|
|
"machine_gcode_flavor": {
|
|
"default_value": "RepRap (Marlin/Sprinter)"
|
|
},
|
|
"gantry_height": {
|
|
"value": "55"
|
|
},
|
|
"machine_head_with_fans_polygon":
|
|
{
|
|
"default_value": [
|
|
[ -12, 9 ],
|
|
[ -12, -9 ],
|
|
[ 14, 9 ],
|
|
[ 14, -9 ]
|
|
]
|
|
}
|
|
}
|
|
}
|
|
|
|
|