mirror of
https://git.mirrors.martin98.com/https://github.com/Ultimaker/Cura
synced 2025-04-28 23:04:34 +08:00
e26e825d83
Because the default in fdmprinter has a formula in the value, the default_value properties wouldn't get used any more.
99 lines
4.8 KiB
JSON
99 lines
4.8 KiB
JSON
{
|
|
"version": 2,
|
|
"name": "Ultimaker 2",
|
|
"inherits": "ultimaker",
|
|
"metadata": {
|
|
"visible": true,
|
|
"author": "Ultimaker",
|
|
"manufacturer": "Ultimaker B.V.",
|
|
"weight": 3,
|
|
"file_formats": "text/x-gcode",
|
|
"platform": "ultimaker2_platform.obj",
|
|
"platform_texture": "Ultimaker2backplate.png",
|
|
"platform_offset": [9, 0, 0],
|
|
"has_materials": false,
|
|
"has_machine_quality": true,
|
|
"preferred_variant_name": "0.4 mm",
|
|
"first_start_actions": ["UM2UpgradeSelection"],
|
|
"supported_actions":["UM2UpgradeSelection"],
|
|
"machine_extruder_trains":
|
|
{
|
|
"0": "ultimaker2_extruder_0"
|
|
},
|
|
"firmware_file": "MarlinUltimaker2.hex"
|
|
},
|
|
"overrides": {
|
|
"machine_name": { "default_value": "Ultimaker 2" },
|
|
"machine_start_gcode" : {
|
|
"value": "\"\" if machine_gcode_flavor == \"UltiGCode\" else \"G21 ;metric values\\nG90 ;absolute positioning\\nM82 ;set extruder to absolute mode\\nM107 ;start with the fan off\\nG28 Z0 ;move Z to bottom endstops\\nG28 X0 Y0 ;move X/Y to endstops\\nG1 X15 Y0 F4000 ;move X/Y to front of printer\\nG1 Z15.0 F9000 ;move the platform to 15mm\\nG92 E0 ;zero the extruded length\\nG1 F200 E10 ;extrude 10 mm of feed stock\\nG92 E0 ;zero the extruded length again\\nG1 F9000\\n;Put printing message on LCD screen\\nM117 Printing...\""
|
|
},
|
|
"machine_end_gcode" : {
|
|
"value": "\";Version _2.6 of the firmware can abort the print too early if the file ends\\n;too soon. However if the file hasn't ended yet because there are comments at\\n;the end of the file, it won't abort yet. Therefore we have to put at least 512\\n;bytes at the end of the g-code so that the file is not yet finished by the\\n;time that the motion planner gets flushed. With firmware version _3.3 this\\n;should be fixed, so this comment wouldn't be necessary any more. Now we have\\n;to pad this text to make precisely 512 bytes.\" if machine_gcode_flavor == \"UltiGCode\" else \"M104 S0 ;extruder heater off\\nM140 S0 ;heated bed heater off (if you have it)\\nG91 ;relative positioning\\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\\nM84 ;steppers off\\nG90 ;absolute positioning\\n;Version _2.6 of the firmware can abort the print too early if the file ends\\n;too soon. However if the file hasn't ended yet because there are comments at\\n;the end of the file, it won't abort yet. Therefore we have to put at least 512\\n;bytes at the end of the g-code so that the file is not yet finished by the\\n;time that the motion planner gets flushed. With firmware version _3.3 this\\n;should be fixed, so this comment wouldn't be necessary any more. Now we have\\n;to pad this text to make precisely 512 bytes.\""
|
|
},
|
|
"machine_width": {
|
|
"default_value": 223
|
|
},
|
|
"machine_depth": {
|
|
"default_value": 223
|
|
},
|
|
"machine_height": {
|
|
"default_value": 205
|
|
},
|
|
"machine_heated_bed": {
|
|
"default_value": true
|
|
},
|
|
"machine_head_with_fans_polygon":
|
|
{
|
|
"default_value": [
|
|
[ -42, 12 ],
|
|
[ -42, -32 ],
|
|
[ 62, 12 ],
|
|
[ 62, -32 ]
|
|
]
|
|
},
|
|
"machine_center_is_zero": {
|
|
"default_value": false
|
|
},
|
|
"gantry_height": {
|
|
"value": "48"
|
|
},
|
|
"machine_use_extruder_offset_to_offset_coords": {
|
|
"default_value": true
|
|
},
|
|
"machine_gcode_flavor": {
|
|
"default_value": "UltiGCode"
|
|
},
|
|
"machine_disallowed_areas": {
|
|
"default_value": [
|
|
[[-115, 112.5], [ -82, 112.5], [ -84, 102.5], [-115, 102.5]],
|
|
[[ 115, 112.5], [ 115, 102.5], [ 110, 102.5], [ 108, 112.5]],
|
|
[[-115, -112.5], [-115, -104.5], [ -84, -104.5], [ -82, -112.5]],
|
|
[[ 115, -112.5], [ 108, -112.5], [ 110, -104.5], [ 115, -104.5]]
|
|
]},
|
|
"machine_nozzle_tip_outer_diameter": {
|
|
"default_value": 1
|
|
},
|
|
"machine_nozzle_head_distance": {
|
|
"default_value": 3
|
|
},
|
|
"machine_nozzle_expansion_angle": {
|
|
"default_value": 45
|
|
},
|
|
"machine_max_feedrate_x": {
|
|
"default_value": 300
|
|
},
|
|
"machine_max_feedrate_y": {
|
|
"default_value": 300
|
|
},
|
|
"machine_max_feedrate_z": {
|
|
"default_value": 40
|
|
},
|
|
"machine_acceleration": {
|
|
"default_value": 3000
|
|
},
|
|
"machine_nozzle_temp_enabled": {
|
|
"default_value": false
|
|
}
|
|
}
|
|
}
|