mirror of
https://git.mirrors.martin98.com/https://github.com/Ultimaker/Cura
synced 2025-06-29 23:25:09 +08:00
38 lines
2.3 KiB
JSON
38 lines
2.3 KiB
JSON
{
|
|
"version": 2,
|
|
"name": "BQ Witbox",
|
|
"inherits": "fdmprinter",
|
|
"metadata":
|
|
{
|
|
"visible": true,
|
|
"author": "BQ",
|
|
"manufacturer": "BQ",
|
|
"file_formats": "text/x-gcode",
|
|
"platform": "bq_witbox_platform.3mf",
|
|
"firmware_file": "MarlinWitbox.hex",
|
|
"machine_extruder_trains": { "0": "bq_witbox_extruder_0" },
|
|
"platform_offset": [
|
|
0,
|
|
-145,
|
|
-38
|
|
]
|
|
},
|
|
"overrides":
|
|
{
|
|
"layer_height": { "default_value": 0.2 },
|
|
"layer_height_0": { "default_value": 0.2 },
|
|
"machine_center_is_zero": { "default_value": false },
|
|
"machine_depth": { "default_value": 210 },
|
|
"machine_end_gcode": { "default_value": "; -- END GCODE --\nM104 S0 ;set extruder temperature to zero (turned off)\nG91 ;set to relative positioning\nG1 E-20 F300 ;retract the filament a bit to release some of the pressure\nG90 ;set to absolute positioning\nG1 Z200 ;move the platform to the bottom\nG28 X0 Y0 ;move to the X/Y origin (Home)\nM84 ;turn off steppers\n; -- end of END GCODE --" },
|
|
"machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
|
|
"machine_heated_bed": { "default_value": false },
|
|
"machine_height": { "default_value": 200 },
|
|
"machine_name": { "default_value": "BQ Witbox" },
|
|
"machine_start_gcode": { "default_value": "; -- START GCODE --\nG21 ;set units to millimetres\nG90 ;set to absolute positioning\nM106 S0 ;set fan speed to zero (turned off)\nG28 X0 Y0 ;move to the X/Y origin (Home)\nG28 Z0 ;move to the Z origin (Home)\nG1 Z15.0 F1200 ;move Z to position 15.0 mm\nG92 E0 ;zero the extruded length\nG1 E20 F200 ;extrude 20mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F7200 ;set feedrate to 120 mm/s\n; -- end of START GCODE --" },
|
|
"machine_width": { "default_value": 297 },
|
|
"speed_print": { "default_value": 40 },
|
|
"support_enable": { "default_value": true },
|
|
"top_bottom_thickness": { "default_value": 1 },
|
|
"wall_thickness": { "value": "1" }
|
|
}
|
|
} |