mirror of
https://git.mirrors.martin98.com/https://github.com/Ultimaker/Cura
synced 2025-06-29 20:55:09 +08:00
63 lines
3.0 KiB
JSON
63 lines
3.0 KiB
JSON
{
|
|
"version": 2,
|
|
"name": "MBot3D Grid 2+ Dual",
|
|
"inherits": "fdmprinter",
|
|
"metadata":
|
|
{
|
|
"visible": true,
|
|
"author": "Magicfirm",
|
|
"manufacturer": "Magicfirm",
|
|
"file_formats": "application/x3g",
|
|
"machine_extruder_trains":
|
|
{
|
|
"0": "mbot3d_grid2_extruder_left",
|
|
"1": "mbot3d_grid2_extruder_right"
|
|
},
|
|
"machine_x3g_variant": "z"
|
|
},
|
|
"overrides":
|
|
{
|
|
"gantry_height": { "value": 10 },
|
|
"infill_overlap": { "value": "12 if infill_sparse_density < 95 and infill_pattern != 'concentric' else 0" },
|
|
"machine_center_is_zero": { "default_value": true },
|
|
"machine_depth": { "default_value": 210 },
|
|
"machine_end_gcode": { "default_value": "M18 A B(Turn off A and B steppers)\nG1 Z190 F900\nG162 X Y F2000\nM18 X Y Z(Turn off steppers after a build)\nM104 S0 T0\nM72 P1 ( Play Ta-Da song )\nM73 P100 (end build progress )\nM137 (build end)\n" },
|
|
"machine_extruder_count": { "default_value": 2 },
|
|
"machine_gcode_flavor": { "default_value": "Makerbot" },
|
|
"machine_head_with_fans_polygon":
|
|
{
|
|
"default_value": [
|
|
[-37, 50],
|
|
[25, 50],
|
|
[25, -40],
|
|
[-37, -40]
|
|
]
|
|
},
|
|
"machine_height": { "default_value": 190 },
|
|
"machine_name": { "default_value": "MBot3D Grid 2+ Dual" },
|
|
"machine_start_gcode": { "default_value": "M136\nG162 X Y F2000\nG161 Z F900\nG92 X0 Y0 Z-5 A0 B0\nG1 Z0.0 F900\nG161 Z F100\nM132 X Y Z A B\nG1 X125 Y115 Z10 F450\nG1 X0 Y115 Z10 F2000.0\nM133 T0\nG1 X20 Y115 Z0.5 F800\nG1 X0 Y115 Z0.5 F600 A12\nG92 A0\n" },
|
|
"machine_steps_per_mm_e": { "default_value": 96.27520187033366 },
|
|
"machine_steps_per_mm_x": { "default_value": 88.888889 },
|
|
"machine_steps_per_mm_y": { "default_value": 88.888889 },
|
|
"machine_steps_per_mm_z": { "default_value": 400 },
|
|
"machine_width": { "default_value": 235 },
|
|
"material_final_print_temperature": { "value": "material_print_temperature" },
|
|
"material_initial_print_temperature": { "value": "material_print_temperature" },
|
|
"raft_airgap": { "default_value": 0.15 },
|
|
"raft_margin": { "default_value": 6 },
|
|
"retract_at_layer_change": { "default_value": true },
|
|
"retraction_amount": { "default_value": 0.7 },
|
|
"retraction_speed": { "default_value": 15 },
|
|
"speed_layer_0": { "value": 15 },
|
|
"speed_print": { "default_value": 50 },
|
|
"speed_travel": { "value": 80 },
|
|
"speed_wall": { "value": 25 },
|
|
"speed_wall_x": { "value": 35 },
|
|
"support_interface_density": { "default_value": 80 },
|
|
"support_interface_enable": { "default_value": true },
|
|
"support_interface_height": { "default_value": 0.8 },
|
|
"support_interface_pattern": { "default_value": "grid" },
|
|
"travel_avoid_other_parts": { "default_value": false },
|
|
"travel_retract_before_outer_wall": { "default_value": true }
|
|
}
|
|
} |