mirror of
https://git.mirrors.martin98.com/https://github.com/Ultimaker/Cura
synced 2025-06-29 21:05:11 +08:00
2c331604e8
These were errors that were copy pasted from other definitions. So leaving them as is would continue to decrease the quality of third party profiles.
107 lines
5.7 KiB
JSON
107 lines
5.7 KiB
JSON
{
|
|
"version": 2,
|
|
"name": "Builder Premium Medium",
|
|
"inherits": "fdmprinter",
|
|
"metadata": {
|
|
"visible": true,
|
|
"author": "Builder SZ",
|
|
"manufacturer": "Builder",
|
|
"quality_definition": "builder_premium_small",
|
|
"file_formats": "text/x-gcode",
|
|
"platform": "builder_premium_platform.3mf",
|
|
"platform_offset": [-126, -36, 117],
|
|
"has_machine_quality": true,
|
|
"preferred_quality_type": "normal",
|
|
"machine_extruder_trains":
|
|
{
|
|
"0": "builder_premium_medium_rear",
|
|
"1": "builder_premium_medium_front"
|
|
}
|
|
},
|
|
|
|
"overrides": {
|
|
"machine_name": { "default_value": "Builder Premium Medium" },
|
|
"machine_heated_bed": { "default_value": true },
|
|
"machine_width": { "default_value": 215 },
|
|
"machine_height": { "default_value": 400 },
|
|
"machine_depth": { "default_value": 205 },
|
|
|
|
"infill_pattern": {"value": "'triangles'" },
|
|
"infill_before_walls": {"value": false },
|
|
|
|
"default_material_print_temperature": { "value": "215" },
|
|
"material_print_temperature_layer_0": { "value": "material_print_temperature + 5" },
|
|
"material_standby_temperature": { "value": "material_print_temperature" },
|
|
|
|
"switch_extruder_retraction_speeds": {"default_value": 15 },
|
|
"switch_extruder_retraction_amount": {"value": 1 },
|
|
|
|
"speed_travel": { "value": "100" },
|
|
"speed_layer_0": { "value": "20" },
|
|
"speed_prime_tower": { "value": "speed_topbottom" },
|
|
"speed_print": { "value": "40" },
|
|
"speed_support": { "value": "speed_wall_0" },
|
|
"speed_support_interface": { "value": "speed_topbottom" },
|
|
"speed_topbottom": { "value": "math.ceil(speed_print * 20 / 35)" },
|
|
"speed_wall": { "value": "math.ceil(speed_print * 30 / 40)" },
|
|
"speed_wall_0": { "value": "math.ceil(speed_wall * 20 / 25)" },
|
|
"speed_wall_x": { "value": "speed_wall" },
|
|
|
|
"prime_tower_position_x": { "value": "175" },
|
|
"prime_tower_position_y": { "value": "178" },
|
|
"prime_tower_wipe_enabled": { "default_value": false },
|
|
"prime_tower_min_volume": { "default_value": 50 },
|
|
|
|
"prime_blob_enable": { "enabled": true },
|
|
|
|
"acceleration_layer_0": { "value": "acceleration_topbottom" },
|
|
"acceleration_prime_tower": { "value": "math.ceil(acceleration_print * 2000 / 4000)" },
|
|
"acceleration_print": { "value": "3000" },
|
|
"acceleration_support": { "value": "math.ceil(acceleration_print * 2000 / 4000)" },
|
|
"acceleration_support_interface": { "value": "acceleration_topbottom" },
|
|
"acceleration_topbottom": { "value": "math.ceil(acceleration_print * 1000 / 3000)" },
|
|
"acceleration_travel": { "value": "acceleration_print" },
|
|
"acceleration_wall": { "value": "math.ceil(acceleration_print * 1000 / 3000)" },
|
|
"acceleration_wall_0": { "value": "math.ceil(acceleration_wall * 1000 / 1000)" },
|
|
|
|
"cool_fan_full_at_height": { "value": "layer_height_0 + 2 * layer_height" },
|
|
"cool_min_layer_time": { "default_value": 10 },
|
|
|
|
"jerk_enabled": { "value": "True" },
|
|
"jerk_layer_0": { "value": "jerk_topbottom" },
|
|
"jerk_prime_tower": { "value": "math.ceil(jerk_print * 15 / 25)" },
|
|
"jerk_print": { "value": "25" },
|
|
"jerk_support": { "value": "math.ceil(jerk_print * 15 / 25)" },
|
|
"jerk_support_interface": { "value": "jerk_topbottom" },
|
|
"jerk_topbottom": { "value": "math.ceil(jerk_print * 5 / 25)" },
|
|
"jerk_wall": { "value": "math.ceil(jerk_print * 10 / 25)" },
|
|
"jerk_wall_0": { "value": "math.ceil(jerk_wall * 5 / 10)" },
|
|
|
|
"wall_thickness": { "value": "1.2" },
|
|
|
|
"retraction_amount": { "default_value": 3 },
|
|
"retraction_speed": { "default_value": 15 },
|
|
"travel_retract_before_outer_wall": { "default_value": true },
|
|
"skin_overlap": { "value": "15" },
|
|
"adhesion_type": { "default_value": "skirt" },
|
|
"machine_nozzle_heat_up_speed": { "default_value": 2 },
|
|
"machine_nozzle_cool_down_speed": { "default_value": 2 },
|
|
"machine_head_with_fans_polygon": { "default_value": [[-75, -18],[-75, 35],[18, 35],[18, -18]] },
|
|
"gantry_height": { "value": "55" },
|
|
"machine_max_feedrate_x": { "default_value": 300 },
|
|
"machine_max_feedrate_y": { "default_value": 300 },
|
|
"machine_max_feedrate_z": { "default_value": 40 },
|
|
"machine_max_acceleration_z": { "default_value": 500 },
|
|
"machine_acceleration": { "default_value": 1000 },
|
|
"machine_max_jerk_xy": { "default_value": 10 },
|
|
"machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
|
|
"machine_start_gcode": {
|
|
"default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG1 Z15.0 F9000 ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E15 ;extrude 15mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F9000\nT0 ;Start with Rear Extruder\n;Put printing message on LCD screen\nM117 Printing..."
|
|
},
|
|
"machine_end_gcode": {
|
|
"default_value": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning"
|
|
},
|
|
"machine_extruder_count": { "default_value": 2 }
|
|
}
|
|
}
|