mirror of
https://git.mirrors.martin98.com/https://github.com/Ultimaker/Cura
synced 2025-06-29 19:55:14 +08:00
e4534943e7
The new default of the raft base thickness is close to the current values. The limited thickness of 0.3mm is used to avoid extreme flowrate for 06 and 08 nozzle sizes. PP-243
60 lines
1.8 KiB
INI
60 lines
1.8 KiB
INI
[general]
|
|
name = BB 0.8
|
|
version = 4
|
|
definition = ultimaker3
|
|
|
|
[metadata]
|
|
setting_version = 20
|
|
type = variant
|
|
hardware_type = nozzle
|
|
|
|
[values]
|
|
acceleration_enabled = True
|
|
acceleration_prime_tower = =math.ceil(acceleration_print * 200 / 3500)
|
|
acceleration_support = =math.ceil(acceleration_print * 2000 / 3500)
|
|
acceleration_support_interface = =math.ceil(acceleration_support * 1500 / 2000)
|
|
acceleration_support_bottom = =math.ceil(acceleration_support_interface * 100 / 1500)
|
|
brim_width = 3
|
|
cool_fan_speed = 50
|
|
cool_min_speed = 5
|
|
infill_overlap = 0
|
|
infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
|
|
infill_wipe_dist = 0
|
|
jerk_print = 25
|
|
layer_height = 0.2
|
|
machine_min_cool_heat_time_window = 15
|
|
machine_nozzle_heat_up_speed = 1.5
|
|
machine_nozzle_id = BB 0.8
|
|
machine_nozzle_size = 0.8
|
|
machine_nozzle_tip_outer_diameter = 2.0
|
|
material_print_temperature = =default_material_print_temperature + 10
|
|
multiple_mesh_overlap = 0
|
|
prime_tower_enable = False
|
|
prime_tower_wipe_enabled = True
|
|
raft_acceleration = =acceleration_layer_0
|
|
raft_airgap = 0
|
|
raft_base_speed = 20
|
|
raft_interface_speed = 20
|
|
raft_speed = 25
|
|
raft_surface_layers = 1
|
|
retraction_hop = 2
|
|
retraction_hop_only_when_collides = True
|
|
retraction_min_travel = =line_width * 3
|
|
retraction_prime_speed = 15
|
|
skin_overlap = 5
|
|
speed_layer_0 = 20
|
|
speed_prime_tower = =math.ceil(speed_print * 7 / 35)
|
|
speed_print = 35
|
|
speed_support = =math.ceil(speed_print * 25 / 35)
|
|
speed_support_interface = =math.ceil(speed_support * 20 / 25)
|
|
speed_support_bottom = =math.ceil(speed_support_interface * 10 / 20)
|
|
speed_wall_0 = =math.ceil(speed_wall * 25 / 30)
|
|
support_angle = 60
|
|
support_bottom_height = =layer_height * 2
|
|
support_interface_enable = True
|
|
support_z_distance = 0
|
|
switch_extruder_prime_speed = 15
|
|
switch_extruder_retraction_amount = 12
|
|
top_bottom_thickness = 1
|
|
wall_0_inset = 0
|