mirror of
https://git.mirrors.martin98.com/https://github.com/Ultimaker/Cura
synced 2025-08-02 05:01:13 +08:00
144 lines
8.3 KiB
JSON
144 lines
8.3 KiB
JSON
{
|
|
"version": 2,
|
|
"name": "Anycubic i3 Mega (S, Pro)",
|
|
"inherits": "fdmprinter",
|
|
"metadata":
|
|
{
|
|
"visible": true,
|
|
"author": "Nils Hendrik Rottgardt",
|
|
"manufacturer": "Anycubic",
|
|
"file_formats": "text/x-gcode",
|
|
"platform": "anycubic_i3_mega_s_platform.3mf",
|
|
"has_materials": true,
|
|
"has_variants": false,
|
|
"has_machine_quality": true,
|
|
"preferred_quality_type": "normal",
|
|
"machine_extruder_trains":
|
|
{
|
|
"0": "anycubic_i3_mega_s_extruder_0"
|
|
}
|
|
},
|
|
|
|
"overrides":
|
|
{
|
|
"machine_name": { "default_value": "Anycubic i3 Mega (S, Pro)" },
|
|
"machine_heated_bed": { "default_value": true },
|
|
"machine_width": { "default_value": 210 },
|
|
"machine_height": { "default_value": 205 },
|
|
"machine_depth": { "default_value": 210 },
|
|
"machine_center_is_zero": { "default_value": false },
|
|
"gantry_height": { "value": "0" },
|
|
"machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
|
|
"machine_start_gcode": { "default_value": "G21 ; metric values \nG90 ; absolute positioning \nM82 ; set extruder to absolute mode \nM107 ; start with the fan off \nM140 S{material_bed_temperature_layer_0} ; Start heating the bed \nG4 S60 ; wait 1 minute \nM104 S{material_initial_print_temperature} ; start heating the hot end \nM190 S{material_bed_temperature_layer_0} ; wait for bed \nM109 S{material_initial_print_temperature} ; wait for hotend \nM300 S1000 P500 ; BEEP heating done \nG28 X0 Y10 Z0 ; move X/Y to min endstops \nM420 S1 ; Enable leveling \nM420 Z2.0 ; Set leveling fading height to 2 mm \nG0 Z0.15 ; lift nozzle a bit \nG92 E0 ; zero the extruded length \nG1 X50 E25 F500 ; Extrude 25mm of filament in a 5cm line. \nG92 E0 ; zero the extruded length again \nG1 E-2 F500 ; Retract a little \nG1 X120 F4000 ; Quickly wipe away from the filament line`" },
|
|
"machine_end_gcode": { "default_value": "M104 S0 ; Extruder off \nM140 S0 ; Heatbed off \nM107 ; Fan off \nG91 ; relative positioning \nG1 E-5 F300 ; retract a little \nG1 Z+10 E-5 ; X-20 Y-20 F{travel_xy_speed} ; lift print head \nG28 X0 Y0 ; homing \nG1 Y180 F2000 ; reset feedrate \nM84 ; disable stepper motors \nG90 ; absolute positioning \nM300 S440 P200 ; Make Print Completed Tones \nM300 S660 P250 ; beep \nM300 S880 P300 ; beep" },
|
|
|
|
"machine_max_acceleration_x": { "value": 3000 },
|
|
"machine_max_acceleration_y": { "value": 3000 },
|
|
"machine_max_acceleration_z": { "value": 3000 },
|
|
"machine_max_acceleration_e": { "value": 3000 },
|
|
"machine_acceleration": { "value": 3000 },
|
|
|
|
"machine_max_jerk_xy": { "value": 10 },
|
|
"machine_max_jerk_z": { "value": 0.4 },
|
|
"machine_max_jerk_e": { "value": 5 },
|
|
|
|
"material_diameter": { "default_value": 1.75 },
|
|
|
|
"acceleration_print": { "value": 1800 },
|
|
"acceleration_travel": { "value": 3000 },
|
|
"acceleration_travel_layer_0": { "value": "acceleration_travel" },
|
|
"acceleration_roofing": { "enabled": "acceleration_enabled and roofing_layer_count > 0 and top_layers > 0" },
|
|
|
|
"jerk_print": { "value": 8 },
|
|
"jerk_travel": { "value": 10 },
|
|
"jerk_travel_layer_0": { "value": "jerk_travel" },
|
|
|
|
"acceleration_enabled": { "value": false },
|
|
"jerk_enabled": { "value": true },
|
|
|
|
"speed_print": { "value": 50.0 } ,
|
|
"speed_infill": { "value": "speed_print" },
|
|
"speed_wall": { "value": "speed_print / 2" },
|
|
"speed_wall_0": { "value": "speed_wall" },
|
|
"speed_wall_x": { "value": "speed_wall" },
|
|
"speed_topbottom": { "value": "speed_print / 2" },
|
|
"speed_roofing": { "value": "speed_topbottom" },
|
|
"speed_travel": { "value": 100.0, "maximum_value_warning": 150.0 },
|
|
"speed_layer_0": { "value": 20.0 },
|
|
"speed_print_layer_0": { "value": "speed_layer_0" },
|
|
"speed_travel_layer_0": { "value": 100.0 },
|
|
"speed_prime_tower": { "value": "speed_topbottom" },
|
|
"speed_support": { "value": "speed_wall_0" },
|
|
"speed_support_interface": { "value": "speed_topbottom" },
|
|
|
|
"skirt_brim_speed": { "value": "speed_layer_0" },
|
|
|
|
"optimize_wall_printing_order": { "value": "True" },
|
|
|
|
"material_initial_print_temperature": { "value": "material_print_temperature + 10" },
|
|
"material_final_print_temperature": { "value": "material_print_temperature" },
|
|
"material_flow": { "value": 100 },
|
|
"travel_compensate_overlapping_walls_0_enabled": { "value": "False" },
|
|
|
|
"infill_sparse_density": { "value": 25 },
|
|
"infill_before_walls": { "value": false },
|
|
"infill_overlap": { "value": 15.0 },
|
|
|
|
|
|
"retraction_speed": { "value": 25, "maximum_value": 40 },
|
|
"retraction_retract_speed": { "maximum_value": 40 },
|
|
"retraction_prime_speed": { "maximum_value": 40 },
|
|
|
|
"retraction_hop_enabled": { "value": true },
|
|
"retraction_hop": { "value": 0.075 },
|
|
"retraction_hop_only_when_collides": { "value": true },
|
|
|
|
"retraction_combing": { "value": "'off'" },
|
|
"retraction_combing_max_distance": { "value": 30 },
|
|
"travel_avoid_other_parts": { "value": true },
|
|
"travel_avoid_supports": { "value": true },
|
|
"travel_retract_before_outer_wall": { "value": true },
|
|
|
|
"retraction_amount": { "value": 6 },
|
|
"retraction_enable": { "value": true },
|
|
"retraction_min_travel": { "value": 1.5 },
|
|
|
|
"cool_fan_full_at_height": { "value": "layer_height_0 + 2 * layer_height" },
|
|
"cool_fan_speed": { "value": 70 },
|
|
"cool_fan_speed_0": { "value": 30 },
|
|
|
|
"cool_fan_enabled": { "value": true },
|
|
"cool_min_layer_time": { "value": 10 },
|
|
|
|
"adhesion_type": { "value": "'none' if support_enable else 'skirt'" },
|
|
"brim_replaces_support": { "value": false },
|
|
"skirt_gap": { "value": 5.0 },
|
|
"skirt_line_count": { "value": 4 },
|
|
|
|
|
|
"support_angle": { "value": "math.floor(math.degrees(math.atan(line_width / 2.0 / layer_height)))" },
|
|
"support_pattern": { "value": "'zigzag'" },
|
|
"support_infill_rate": { "value": "0 if support_enable and support_structure == 'tree' else 20" },
|
|
"support_use_towers": { "value": false },
|
|
"support_xy_distance": { "value": "wall_line_width_0 * 2" },
|
|
"support_xy_distance_overhang": { "value": "wall_line_width_0" },
|
|
"support_z_distance": { "value": "layer_height if layer_height >= 0.16 else layer_height * 2" },
|
|
"support_xy_overrides_z": { "value": "'xy_overrides_z'" },
|
|
"support_wall_count": { "value": 1 },
|
|
"support_brim_enable": { "value": true },
|
|
"support_brim_width": { "value": 4 },
|
|
|
|
"support_interface_enable": { "value": true },
|
|
"support_structure": { "value": "'tree'" },
|
|
"support_type": { "value": "'buildplate' if support_structure == 'tree' else 'everywhere'" },
|
|
"support_interface_height": { "value": "layer_height * 4" },
|
|
"support_interface_density": { "value": 33.333 },
|
|
"support_interface_pattern": { "value": "'grid'" },
|
|
"support_interface_skip_height": { "value": 0.2 },
|
|
"minimum_support_area": { "value": 2 },
|
|
"minimum_interface_area": { "value": 10 },
|
|
"top_bottom_thickness": { "value": "layer_height_0 + layer_height * math.floor(1.2 / layer_height)" },
|
|
"wall_thickness": { "value": "line_width * 3" }
|
|
}
|
|
}
|