mirror of
https://git.mirrors.martin98.com/https://github.com/Ultimaker/Cura
synced 2025-08-02 12:30:39 +08:00
dc09465afe
Some contributors seem to have a shift key stuck here or there. Many 'stylised' capitalisations weren't reflected even on the manufacturer's websites, or were also stylising words like 'pro' and 'dual' or even actual chemical names like 'nylon'. Normalising the caps makes it more fair for everyone, since all of these are written in the same font. As discussed with the Cura team.
70 lines
4.2 KiB
JSON
70 lines
4.2 KiB
JSON
{
|
|
"version": 2,
|
|
"name": "Fabtotum Personal Fabricator",
|
|
"inherits": "fdmprinter",
|
|
"metadata": {
|
|
"visible": true,
|
|
"author": "Fabtotum",
|
|
"manufacturer": "Fabtotum",
|
|
"file_formats": "text/x-gcode",
|
|
"platform": "fabtotum_platform.3mf",
|
|
"has_machine_quality": true,
|
|
"has_variants": true,
|
|
"variants_name": "Head",
|
|
"preferred_variant_name": "Lite 0.4 mm",
|
|
"preferred_material": "fabtotum_pla",
|
|
"supports_usb_connection": false,
|
|
"machine_extruder_trains":
|
|
{
|
|
"0": "fabtotum_extruder_0"
|
|
}
|
|
},
|
|
"overrides": {
|
|
"machine_name": { "default_value": "FABtotum Personal Fabricator" },
|
|
"machine_start_gcode": {
|
|
"default_value": ";Layer height: {layer_height}\n;Walls: {wall_thickness}\n;Fill: {infill_sparse_density}\n;Top\\Bottom Thickness: {top_bottom_thickness}\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nG4 S1 ;1 millisecond pause to buffer the bep bep \nM300 S2 ;FAB bep bep (start the print, go check the oozing and skirt lines adesion) \nG4 S1 ;1 second pause to reach the printer (run fast)\nG92 E0 ;zero the extruded length \nG1 F200 E35 ;slowly extrude 35mm of filament to clean the nozzle and build up extrusion pressure \nG92 E0 ;zero the extruded length again \n;print"
|
|
},
|
|
"machine_end_gcode": {
|
|
"default_value": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-3 X+5 Y+5 F5000 ;move Z up a bit and retract filament even more\n;end of the print\nM84 ;steppers off\nG90 ;absolute positioning\nM300 S2 ;FAB bep bep (end print)"
|
|
},
|
|
"gantry_height": { "value": "55" },
|
|
"machine_width": { "default_value": 214 },
|
|
"machine_height": { "default_value": 241.5 },
|
|
"machine_depth": { "default_value": 234 },
|
|
"machine_center_is_zero": { "default_value": false },
|
|
"machine_heated_bed": { "default_value": true },
|
|
"machine_head_with_fans_polygon": { "default_value": [[-75, 35], [-75, -18], [18, 35], [18, -18]] },
|
|
"machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
|
|
"machine_max_feedrate_x": { "default_value": 250 },
|
|
"machine_max_feedrate_y": { "default_value": 250 },
|
|
"machine_max_feedrate_z": { "default_value": 15 },
|
|
"machine_max_acceleration_x": { "default_value": 10000 },
|
|
"machine_max_acceleration_y": { "default_value": 10000 },
|
|
"machine_max_acceleration_z": { "default_value": 50 },
|
|
"machine_max_acceleration_e": { "default_value": 100 },
|
|
"machine_acceleration": { "default_value": 4000 },
|
|
"machine_max_jerk_xy": { "default_value": 25.0 },
|
|
"machine_max_jerk_z": { "default_value": 0.4 },
|
|
"machine_max_jerk_e": { "default_value": 1.0 },
|
|
"retraction_hop_enabled": { "default_value": false },
|
|
"material_final_print_temperature": { "value": "material_print_temperature - 5" },
|
|
"material_initial_print_temperature": { "value": "material_print_temperature" },
|
|
"travel_avoid_distance": { "value": 1 },
|
|
"speed_travel": { "value": 200 },
|
|
"speed_infill": { "value": "round(speed_print * 1.05, 0)" },
|
|
"speed_topbottom": { "value": "round(speed_print * 0.95, 0)" },
|
|
"speed_wall": { "value": "speed_print" },
|
|
"speed_wall_0": { "value": "round(speed_print * 0.9, 0)" },
|
|
"speed_wall_x": { "value": "speed_wall" },
|
|
"speed_layer_0": { "value": "min(round(speed_print * 0.75, 0), 45.0)" },
|
|
"speed_travel_layer_0": { "value": "round(speed_travel * 0.7, 0)" },
|
|
"skirt_brim_speed": { "value": "speed_layer_0" },
|
|
"skirt_line_count": { "default_value": 3 },
|
|
"skirt_brim_minimal_length": { "default_value": 150 },
|
|
"infill_sparse_density": { "default_value": 24 },
|
|
"top_bottom_thickness": { "default_value": 0.6 },
|
|
"support_z_distance": { "default_value": 0.2, "value": "min(2 * layer_height, machine_nozzle_size * 0.75)" },
|
|
"support_interface_enable": { "default_value": true }
|
|
}
|
|
}
|