mirror of
https://git.mirrors.martin98.com/https://github.com/Ultimaker/Cura
synced 2025-06-29 23:35:23 +08:00
43 lines
2.4 KiB
JSON
43 lines
2.4 KiB
JSON
{
|
|
"version": 2,
|
|
"name": "Cocoon Create Touch",
|
|
"inherits": "fdmprinter",
|
|
"metadata":
|
|
{
|
|
"visible": true,
|
|
"author": "Thushan Fernando",
|
|
"manufacturer": "Cocoon Create",
|
|
"file_formats": "text/x-gcode",
|
|
"platform": "wanhao_200_200_platform.obj",
|
|
"has_materials": true,
|
|
"machine_extruder_trains": { "0": "cocoon_create_touch_extruder_0" },
|
|
"platform_offset": [
|
|
0,
|
|
-28,
|
|
0
|
|
],
|
|
"platform_texture": "Cocoon-backplate.png",
|
|
"preferred_quality_type": "fine"
|
|
},
|
|
"overrides":
|
|
{
|
|
"layer_height": { "default_value": 0.1 },
|
|
"layer_height_0": { "default_value": 0.2 },
|
|
"machine_depth": { "default_value": 200 },
|
|
"machine_end_gcode": { "default_value": "M104 S0 ;extruder heater off \n G91 ;relative positioning\n G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\n G1 Z+0.5 E-5 X-20 Y-20 F{speed_travel} ;move Z up a bit and retract filament even more\n G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\n M84 ;steppers off\n G90 ;absolute positioning" },
|
|
"machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
|
|
"machine_heated_bed": { "default_value": true },
|
|
"machine_height": { "default_value": 180 },
|
|
"machine_name": { "default_value": "Cocoon Create Touch" },
|
|
"machine_start_gcode": { "default_value": "G21 ;metric values\n G90 ;absolute positioning\n M82 ;set extruder to absolute mode\n M107 ;start with the fan off\n G28 X0 Y0 ;move X/Y to min endstops\n G28 Z0 ;move Z to min endstops\n G1 Z15.0 F{speed_travel} ;move the platform down 15mm\n G92 E0 ;zero the extruded length\n G1 F200 E3 ;extrude 3mm of feed stock\n G92 E0 ;zero the extruded length again\n G1 F{speed_travel} \n ;Put printing message on LCD screen\n M117 Printing..." },
|
|
"machine_width": { "default_value": 200 },
|
|
"material_diameter": { "default_value": 1.75 },
|
|
"retraction_amount": { "default_value": 4.5 },
|
|
"retraction_enable": { "default_value": true },
|
|
"retraction_speed": { "default_value": 25 },
|
|
"speed_print": { "default_value": 50 },
|
|
"support_enable": { "default_value": true },
|
|
"top_bottom_thickness": { "default_value": 0.6 },
|
|
"wall_thickness": { "value": "0.8" }
|
|
}
|
|
} |