mirror of
https://git.mirrors.martin98.com/https://github.com/Ultimaker/Cura
synced 2025-06-29 23:25:09 +08:00
d561810024
They are not being used any more. For some reason people thought that an exception was made for extruders or something. And people keep adding them for the definition files too. I'll add a test to prevent that.
53 lines
3.3 KiB
JSON
53 lines
3.3 KiB
JSON
{
|
|
"version": 2,
|
|
"name": "gMax 1.5 Plus Dual Extruder",
|
|
"inherits": "fdmprinter",
|
|
"metadata": {
|
|
"visible": true,
|
|
"author": "GTL_180109",
|
|
"manufacturer": "gCreate",
|
|
"category": "Other",
|
|
"file_formats": "text/x-gcode",
|
|
"platform": "gmax_1-5_xt-plus_s3d_full model_150707.stl",
|
|
"has_variants": true,
|
|
"variants_name": "Hotend",
|
|
"preferred_variant_name": "0.5mm E3D (Default)",
|
|
"preferred_quality_type": "gmax15plus_global_dual_normal",
|
|
"machine_extruder_trains": {
|
|
"0": "gmax15plus_dual_extruder_0",
|
|
"1": "gmax15plus_dual_extruder_1"
|
|
}
|
|
},
|
|
|
|
"overrides": {
|
|
"machine_name": { "default_value": "gMax 1.5 Plus Dual Extruder" },
|
|
"machine_extruder_count": { "default_value": 2 },
|
|
"machine_heated_bed": { "default_value": false },
|
|
"machine_width": { "default_value": 406 },
|
|
"machine_depth": { "default_value": 406 },
|
|
"machine_height": { "default_value": 533 },
|
|
"machine_center_is_zero": { "default_value": false },
|
|
"material_diameter": { "default_value": 1.75 },
|
|
"machine_nozzle_size": { "default_value": 0.5 },
|
|
"layer_height": { "default_value": 0.2 },
|
|
"layer_height_0": { "default_value": 0.3 },
|
|
"retraction_amount": { "default_value": 1 },
|
|
"retraction_speed": { "default_value": 70},
|
|
"adhesion_type": { "default_value": "skirt" },
|
|
"gantry_height": { "value": "50" },
|
|
"speed_print": { "default_value": 50 },
|
|
"machine_max_acceleration_x": { "default_value": 600 },
|
|
"machine_max_acceleration_y": { "default_value": 600 },
|
|
"machine_max_acceleration_z": { "default_value": 30 },
|
|
"machine_max_acceleration_e": { "default_value": 10000 },
|
|
"machine_max_jerk_xy": { "default_value": 8 },
|
|
"machine_max_jerk_z": { "default_value": 0.4 },
|
|
"machine_max_jerk_e": { "default_value": 5.0 },
|
|
"machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
|
|
"machine_start_gcode": { "default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 ;Home X/Y/Z\nM104 S{material_print_temperature} T0 ; Preheat Left Extruder\nM104 S{material_print_temperature} T1 ; Preheat Right Extruder\nM109 S{material_print_temperature} T0 ; Preheat Left Extruder\nM109 S{material_print_temperature} T1 ; Preheat Right Extruder\nG91 ;relative positioning\nG90 ;absolute positioning\nM218 T1 X34.3 Y0; Set 2nd extruder offset. This can be changed later if needed\nG1 Z25.0 F9000 ;raise nozzle 25mm\nG92 E0 ;zero the extruded length again\nG1 F9000\n;Put printing message on LCD screen\nM117 Printing..." },
|
|
"machine_end_gcode": { "default_value": "M104 S0 T0;Left extruder off\nM104 S0 T1; Right extruder off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning" },
|
|
"wall_thickness": { "default_value": 1 },
|
|
"top_bottom_thickness": { "default_value": 1 }
|
|
}
|
|
}
|