Ghostkeeper c9aa8b4dfd

Put stand-by temperature back in optimised profiles ...

The stand-by temperature should be 175 for these profiles because the UM3 firmware levels the bed with that temperature. It should be 100 in the quality profiles because that's what the stand-by temperature should be when standing by while the other nozzle is printing.

Contributes to issue CURA-3960.

2017-06-26 14:58:14 +02:00

..

um3_aa0.4_ABS_Draft_Print.inst.cfg

Changed profile names

2017-05-15 16:52:25 +02:00

um3_aa0.4_ABS_Fast_Print.inst.cfg

Changed profile names

2017-05-15 16:52:25 +02:00

um3_aa0.4_ABS_High_Quality.inst.cfg

Changed profile names

2017-05-15 16:52:25 +02:00

um3_aa0.4_ABS_Normal_Quality.inst.cfg

Changed profile names

2017-05-15 16:52:25 +02:00

um3_aa0.4_CPE_Draft_Print.inst.cfg

Changed profile names

2017-05-15 16:52:25 +02:00

um3_aa0.4_CPE_Fast_Print.inst.cfg

Changed profile names

2017-05-15 16:52:25 +02:00

um3_aa0.4_CPE_High_Quality.inst.cfg

Changed profile names

2017-05-15 16:52:25 +02:00

um3_aa0.4_CPE_Normal_Quality.inst.cfg

Changed profile names

2017-05-15 16:52:25 +02:00

um3_aa0.4_CPEP_Draft_Print.inst.cfg

Remove redundant travel avoid distance settings

2017-05-19 15:57:53 +02:00

um3_aa0.4_CPEP_Fast_Print.inst.cfg

Remove redundant travel avoid distance settings

2017-05-19 15:57:53 +02:00

um3_aa0.4_CPEP_High_Quality.inst.cfg

Remove redundant travel avoid distance settings

2017-05-19 15:57:53 +02:00

um3_aa0.4_CPEP_Normal_Quality.inst.cfg

Remove redundant travel avoid distance settings

2017-05-19 15:57:53 +02:00

um3_aa0.4_Nylon_Draft_Print.inst.cfg

Enable prime tower for Nylon

2017-06-09 10:20:14 +02:00

um3_aa0.4_Nylon_Fast_Print.inst.cfg

Enable prime tower for Nylon

2017-06-09 10:20:14 +02:00

um3_aa0.4_Nylon_High_Quality.inst.cfg

Enable prime tower for Nylon

2017-06-09 10:20:14 +02:00

um3_aa0.4_Nylon_Normal_Quality.inst.cfg

Enable prime tower for Nylon

2017-06-09 10:20:14 +02:00

um3_aa0.4_PC_Draft_Print.inst.cfg

Limit Raft Interface Thickness to a minimum of 0.225mm

2017-06-09 10:29:58 +02:00

um3_aa0.4_PC_Fast_Print.inst.cfg

Limit Raft Interface Thickness to a minimum of 0.225mm

2017-06-09 10:29:58 +02:00

um3_aa0.4_PC_High_Quality.inst.cfg

Limit Raft Interface Thickness to a minimum of 0.225mm

2017-06-09 10:29:58 +02:00

um3_aa0.4_PC_Normal_Quality.inst.cfg

Limit Raft Interface Thickness to a minimum of 0.225mm

2017-06-09 10:29:58 +02:00

um3_aa0.4_PLA_Draft_Print.inst.cfg

Changed profile names

2017-05-15 16:52:25 +02:00

um3_aa0.4_PLA_Fast_Print.inst.cfg

Changed profile names

2017-05-15 16:52:25 +02:00

um3_aa0.4_PLA_High_Quality.inst.cfg

Changed profile names

2017-05-15 16:52:25 +02:00

um3_aa0.4_PLA_Normal_Quality.inst.cfg

Changed profile names

2017-05-15 16:52:25 +02:00

um3_aa0.4_PP_Draft_Print.inst.cfg

Fix stand-by temperature

2017-06-26 14:32:48 +02:00

um3_aa0.4_PP_Fast_Print.inst.cfg

Fix stand-by temperature

2017-06-26 14:32:48 +02:00

um3_aa0.4_PP_Normal_Quality.inst.cfg

Fix stand-by temperature

2017-06-26 14:32:48 +02:00

um3_aa0.4_PVA_Not_Supported_Quality.inst.cfg

Add setting_version to all profiles

2017-05-12 13:40:54 +02:00

um3_aa0.4_TPU_Draft_Print.inst.cfg

Put stand-by temperature back in optimised profiles

2017-06-26 14:58:14 +02:00

um3_aa0.4_TPU_Fast_Print.inst.cfg

Put stand-by temperature back in optimised profiles

2017-06-26 14:58:14 +02:00

um3_aa0.4_TPU_Normal_Quality.inst.cfg

Put stand-by temperature back in optimised profiles

2017-06-26 14:58:14 +02:00

um3_aa0.8_ABS_Draft_Print.inst.cfg

Changed profile names

2017-05-15 16:52:25 +02:00

um3_aa0.8_ABS_Superdraft_Print.inst.cfg

Changed profile names

2017-05-15 16:52:25 +02:00

um3_aa0.8_ABS_Verydraft_Print.inst.cfg

Changed profile names

2017-05-15 16:52:25 +02:00

um3_aa0.8_CPE_Draft_Print.inst.cfg

Changed profile names

2017-05-15 16:52:25 +02:00

um3_aa0.8_CPE_Superdraft_Print.inst.cfg

Changed profile names

2017-05-15 16:52:25 +02:00

um3_aa0.8_CPE_Verydraft_Print.inst.cfg

Changed profile names

2017-05-15 16:52:25 +02:00

um3_aa0.8_CPEP_Draft_Print.inst.cfg

Put stand-by temperature back in optimised profiles

2017-06-26 14:58:14 +02:00

um3_aa0.8_CPEP_Superdraft_Print.inst.cfg

Put stand-by temperature back in optimised profiles

2017-06-26 14:58:14 +02:00

um3_aa0.8_CPEP_Verydraft_Print.inst.cfg

Put stand-by temperature back in optimised profiles

2017-06-26 14:58:14 +02:00

um3_aa0.8_Nylon_Draft_Print.inst.cfg

Enable prime tower for Nylon

2017-06-09 10:20:14 +02:00

um3_aa0.8_Nylon_Superdraft_Print.inst.cfg

Enable prime tower for Nylon

2017-06-09 10:20:14 +02:00

um3_aa0.8_Nylon_Verydraft_Print.inst.cfg

Enable prime tower for Nylon

2017-06-09 10:20:14 +02:00

um3_aa0.8_PC_Draft_Print.inst.cfg

Put stand-by temperature back in optimised profiles

2017-06-26 14:58:14 +02:00

um3_aa0.8_PC_Superdraft_Print.inst.cfg

Put stand-by temperature back in optimised profiles

2017-06-26 14:58:14 +02:00

um3_aa0.8_PC_Verydraft_Print.inst.cfg

Put stand-by temperature back in optimised profiles

2017-06-26 14:58:14 +02:00

um3_aa0.8_PLA_Draft_Print.inst.cfg

Set PLA 0.8mm infill back to normal 20%

2017-06-09 10:40:22 +02:00

um3_aa0.8_PLA_Superdraft_Print.inst.cfg

Set PLA 0.8mm infill back to normal 20%

2017-06-09 10:40:22 +02:00

um3_aa0.8_PLA_Verydraft_Print.inst.cfg

Set PLA 0.8mm infill back to normal 20%

2017-06-09 10:40:22 +02:00

um3_aa0.8_PP_Draft_Print.inst.cfg

Fix stand-by temperature

2017-06-26 14:32:48 +02:00

um3_aa0.8_PP_Superdraft_Print.inst.cfg

Fix stand-by temperature

2017-06-26 14:32:48 +02:00

um3_aa0.8_PP_Verydraft_Print.inst.cfg

Fix stand-by temperature

2017-06-26 14:32:48 +02:00

um3_aa0.8_PVA_Not_Supported_Quality.inst.cfg

Add setting_version to all profiles

2017-05-12 13:40:54 +02:00

um3_aa0.8_PVA_Not_Supported_Superdraft_Quality.inst.cfg

Add setting_version to all profiles

2017-05-12 13:40:54 +02:00

um3_aa0.8_TPU_Draft_Print.inst.cfg

Put stand-by temperature back in optimised profiles

2017-06-26 14:58:14 +02:00

um3_aa0.8_TPU_Superdraft_Print.inst.cfg

Put stand-by temperature back in optimised profiles

2017-06-26 14:58:14 +02:00

um3_aa0.8_TPU_Verydraft_Print.inst.cfg

Put stand-by temperature back in optimised profiles

2017-06-26 14:58:14 +02:00

um3_bb0.4_ABS_Not_Supported_Quality.inst.cfg

Add setting_version to all profiles

2017-05-12 13:40:54 +02:00

um3_bb0.4_ABS_Not_Supported_Superdraft_Quality.inst.cfg

Add setting_version to all profiles

2017-05-12 13:40:54 +02:00

um3_bb0.4_CPE_Not_Supported_Quality.inst.cfg

Add setting_version to all profiles

2017-05-12 13:40:54 +02:00

um3_bb0.4_CPE_Not_Supported_Superdraft_Quality.inst.cfg

Add setting_version to all profiles

2017-05-12 13:40:54 +02:00

um3_bb0.4_CPEP_Not_Supported_Quality.inst.cfg

Add setting_version to all profiles

2017-05-12 13:40:54 +02:00

um3_bb0.4_CPEP_Not_Supported_Superdraft_Quality.inst.cfg

Add setting_version to all profiles

2017-05-12 13:40:54 +02:00

um3_bb0.4_Nylon_Not_Supported_Quality.inst.cfg

Add setting_version to all profiles

2017-05-12 13:40:54 +02:00

um3_bb0.4_Nylon_Not_Supported_Superdraft_Quality.inst.cfg

Add setting_version to all profiles

2017-05-12 13:40:54 +02:00

um3_bb0.4_PC_Not_Supported_Quality.inst.cfg

Add setting_version to all profiles

2017-05-12 13:40:54 +02:00

um3_bb0.4_PLA_Not_Supported_Quality.inst.cfg

Add setting_version to all profiles

2017-05-12 13:40:54 +02:00

um3_bb0.4_PLA_Not_Supported_Superdraft_Quality.inst.cfg

Add setting_version to all profiles

2017-05-12 13:40:54 +02:00

um3_bb0.4_PVA_Draft_Print.inst.cfg

Remove overrides of support interface speed/accel/jerk

2017-05-16 14:40:42 +02:00

um3_bb0.4_PVA_Fast_Print.inst.cfg

Remove overrides of support interface speed/accel/jerk

2017-05-16 14:40:42 +02:00

um3_bb0.4_PVA_High_Quality.inst.cfg

Fixed order of pva profiles

2017-05-19 14:00:40 +02:00

um3_bb0.4_PVA_Normal_Quality.inst.cfg

Remove overrides of support interface speed/accel/jerk

2017-05-16 14:40:42 +02:00

um3_bb0.4_TPU_Not_Supported_Quality.inst.cfg

Add setting_version to all profiles

2017-05-12 13:40:54 +02:00

um3_bb0.4_TPU_Not_Supported_Superdraft_Quality.inst.cfg

Add setting_version to all profiles

2017-05-12 13:40:54 +02:00

um3_bb0.8_ABS_Not_Supported_Quality.inst.cfg

Add setting_version to all profiles

2017-05-12 13:40:54 +02:00

um3_bb0.8_ABS_Not_Supported_Superdraft_Quality.inst.cfg

Add setting_version to all profiles

2017-05-12 13:40:54 +02:00

um3_bb0.8_CPE_Not_Supported_Quality.inst.cfg

Add setting_version to all profiles

2017-05-12 13:40:54 +02:00

um3_bb0.8_CPE_Not_Supported_Superdraft_Quality.inst.cfg

Add setting_version to all profiles

2017-05-12 13:40:54 +02:00

um3_bb0.8_CPEP_Not_Supported_Quality.inst.cfg

Add setting_version to all profiles

2017-05-12 13:40:54 +02:00

um3_bb0.8_CPEP_Not_Supported_Superdraft_Quality.inst.cfg

Add setting_version to all profiles

2017-05-12 13:40:54 +02:00

um3_bb0.8_Nylon_Not_Supported_Quality.inst.cfg

Add setting_version to all profiles

2017-05-12 13:40:54 +02:00

um3_bb0.8_Nylon_Not_Supported_Superdraft_Quality.inst.cfg

Add setting_version to all profiles

2017-05-12 13:40:54 +02:00

um3_bb0.8_PC_Not_Supported_Quality.inst.cfg

Add setting_version to all profiles

2017-05-12 13:40:54 +02:00

um3_bb0.8_PC_Not_Supported_Superdraft_Quality.inst.cfg

Add setting_version to all profiles

2017-05-12 13:40:54 +02:00

um3_bb0.8_PLA_Not_Supported_Quality.inst.cfg

Add setting_version to all profiles

2017-05-12 13:40:54 +02:00

um3_bb0.8_PLA_Not_Supported_Superdraft_Quality.inst.cfg

Add setting_version to all profiles

2017-05-12 13:40:54 +02:00

um3_bb0.8_PVA_Draft_Print.inst.cfg

Changed profile names

2017-05-15 16:52:25 +02:00

um3_bb0.8_PVA_Superdraft_Print.inst.cfg

Changed profile names

2017-05-15 16:52:25 +02:00

um3_bb0.8_PVA_Verydraft_Print.inst.cfg

Changed profile names

2017-05-15 16:52:25 +02:00

um3_bb0.8_TPU_Not_Supported_Quality.inst.cfg

Revert "Removed no longer used profiles"

2017-05-16 17:18:57 +02:00

um3_bb0.8_TPU_Not_Supported_Superdraft_Quality.inst.cfg

Revert "Removed no longer used profiles"

2017-05-16 17:18:57 +02:00

um3_global_Draft_Quality.inst.cfg

Fixed missing namechanges for global profiles

2017-05-17 13:21:11 +02:00

um3_global_Fast_Quality.inst.cfg

Fixed missing namechanges for global profiles

2017-05-17 13:21:11 +02:00

um3_global_High_Quality.inst.cfg

Changed profile names

2017-05-15 16:52:25 +02:00

um3_global_Normal_Quality.inst.cfg

Changed profile names

2017-05-15 16:52:25 +02:00

um3_global_Superdraft_Quality.inst.cfg

Fixed missing namechanges for global profiles

2017-05-17 13:21:11 +02:00

um3_global_Verydraft_Quality.inst.cfg

Fixed missing namechanges for global profiles

2017-05-17 13:21:11 +02:00