Ghostkeeper 4cb59b5454

Fix overriding of prime tower position ...

We had changed it for all printers back when we changed the prime tower position to a formula, but since then we've been getting new printer definitions that were made from templates floating around with the old structure.
We should really have an automated test for this.

Discovered during review of #6518.

2019-10-14 11:02:43 +02:00

..

3dator.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

101Hero.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

abax_pri3.def.json

CURA-5334 remove material_diameter from all printer definitions and also from fdmprinter.def.json

2018-06-12 13:39:29 +02:00

abax_pri5.def.json

CURA-5334 remove material_diameter from all printer definitions and also from fdmprinter.def.json

2018-06-12 13:39:29 +02:00

abax_titan.def.json

CURA-5334 remove material_diameter from all printer definitions and also from fdmprinter.def.json

2018-06-12 13:39:29 +02:00

alfawise_u20.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

alfawise_u30.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

alya3dp.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

alyanx3dp.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

anet_a6.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:38:36 +02:00

anycubic_4max.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

anycubic_chiron.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

anycubic_i3_mega.def.json

Add sideways move to not squash the primed amount onto the nozzle

2019-10-02 11:44:24 +02:00

bfb.def.json

CURA-5334 Remove machine nozzle size from machine definitions and move

2018-07-04 12:00:38 +02:00

bibo2_dual.def.json

Overwrite prime_tower_position_* value not default_value

2019-10-10 10:09:49 -06:00

bq_hephestos_2.def.json

bq Hephestos2: Getting a rid of custom g-code

2018-08-25 14:46:21 +02:00

bq_hephestos_xl.def.json

CURA-5334 remove material_diameter from all printer definitions and also from fdmprinter.def.json

2018-06-12 13:39:29 +02:00

bq_hephestos.def.json

Move hardcoded firmware-file table to definitions

2018-08-02 11:50:28 +02:00

bq_witbox_2.def.json

CURA-5334 remove material_diameter from all printer definitions and also from fdmprinter.def.json

2018-06-12 13:39:29 +02:00

bq_witbox.def.json

Move hardcoded firmware-file table to definitions

2018-08-02 11:50:28 +02:00

builder_premium_large.def.json

Fix overriding of prime tower position

2019-10-14 11:02:43 +02:00

builder_premium_medium.def.json

Fix overriding of prime tower position

2019-10-14 11:02:43 +02:00

builder_premium_small.def.json

Fix overriding of prime tower position

2019-10-14 11:02:43 +02:00

cartesio.def.json

Fix overriding of prime tower position

2019-10-14 11:02:43 +02:00

cocoon_create_modelmaker.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

creality_base.def.json

Apply proposed Creality changes

2019-09-03 09:48:01 +02:00

creality_cr10.def.json

Make base Creality profile invisible (but the rest visible)

2019-07-02 12:00:24 +02:00

creality_cr10max.def.json

make Ender-5 Plus and CR-10 Max visible

2019-08-28 15:04:17 +02:00

creality_cr10mini.def.json

Make base Creality profile invisible (but the rest visible)

2019-07-02 12:00:24 +02:00

creality_cr10s4.def.json

Make base Creality profile invisible (but the rest visible)

2019-07-02 12:00:24 +02:00

creality_cr10s5.def.json

Make base Creality profile invisible (but the rest visible)

2019-07-02 12:00:24 +02:00

creality_cr10s.def.json

Make base Creality profile invisible (but the rest visible)

2019-07-02 12:00:24 +02:00

creality_cr10spro.def.json

Rename creawsome to creality

2019-07-02 11:48:23 +02:00

creality_cr20.def.json

Make base Creality profile invisible (but the rest visible)

2019-07-02 12:00:24 +02:00

creality_cr20pro.def.json

Make base Creality profile invisible (but the rest visible)

2019-07-02 12:00:24 +02:00

creality_cr-x.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

creality_ender2.def.json

Make base Creality profile invisible (but the rest visible)

2019-07-02 12:00:24 +02:00

creality_ender3.def.json

Reduce size of print head without fans for one-at-a-time mode

2019-09-09 17:37:01 +02:00

creality_ender4.def.json

Make base Creality profile invisible (but the rest visible)

2019-07-02 12:00:24 +02:00

creality_ender5.def.json

fix ender purge line going out of bed

2019-07-02 19:39:20 +02:00

creality_ender5plus.def.json

make Ender-5 Plus and CR-10 Max visible

2019-08-28 15:04:17 +02:00

creatable_d3.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

cubicon_3dp_110f.def.json

Add check for platform mesh & texture

2019-02-15 14:42:50 +01:00

cubicon_3dp_210f.def.json

Add check for platform mesh & texture

2019-02-15 14:42:50 +01:00

cubicon_3dp_310f.def.json

Add check for platform mesh & texture

2019-02-15 14:42:50 +01:00

cubicon_common.def.json

4904 cubicon device (#4963)

2019-01-22 16:44:04 +01:00

cubicon_dual_pro_a30.def.json

Add Cubicon plus A15 and A30

2019-09-12 14:05:13 +02:00

cubicon_style_plus_a15.def.json

Add Cubicon plus A15 and A30

2019-09-12 14:05:13 +02:00

custom.def.json

Rename Custom FDM Printer to Custom FFF printer

2018-07-11 13:30:27 +02:00

dagoma_discoeasy200.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

dagoma_magis.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

dagoma_neva.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

delta_go.def.json

Add check for platform mesh & texture

2019-02-15 14:42:50 +01:00

deltabot.def.json

Mark DeltaBot as a custom printer

2019-07-08 10:27:06 +02:00

deltacomb.def.json

Remove has_machine_materials and has_variant_materials

2019-08-07 10:44:02 +02:00

easyarts_ares.def.json

Make corrections to manufacturer fields

2019-07-03 11:27:19 +02:00

erzay3d.def.json

Fixed the value of "retraction_amount"

2019-06-21 11:53:06 +03:00

fabtotum.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

fdmextruder.def.json

Update setting_version

2019-09-24 11:19:03 +02:00

fdmprinter.def.json

Merge branch 'feature_intent'

2019-10-08 13:17:54 +02:00

felixpro2dual.def.json

Remove Felix' platform texture

2019-08-05 10:35:55 +02:00

felixtec4dual.def.json

Fix indentation and remove spaces

2019-02-24 19:01:13 +01:00

flsun_qq_s.def.json

Update flsun_qq_s.def.json

2019-06-24 13:22:18 +02:00

flsun_qq.def.json

Correction for build volume.

2019-09-15 09:56:21 -07:00

folgertech_FT-5.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

geeetech_a30.def.json

Added upgrader for 4.3

2019-07-23 11:15:13 +02:00

gmax15plus_dual.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

gmax15plus.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

grr_neo.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

hellbot_adonis.def.json

Fix whitespace

2019-09-26 10:33:44 +02:00

hellbot_magna_dual.def.json

Fix dual extrusion for Magna Dual

2019-09-26 11:14:01 +02:00

hellbot_magna_I.def.json

Fix whitespace

2019-09-26 10:33:44 +02:00

helloBEEprusa.def.json

CURA-5334 remove material_diameter from all printer definitions and also from fdmprinter.def.json

2018-06-12 13:39:29 +02:00

hms434.def.json

Remove has_machine_materials metadata

2019-10-02 08:55:04 +02:00

imade3d_jellybox_2.def.json

Remove has_machine_materials and has_variant_materials

2019-08-07 10:44:02 +02:00

imade3d_jellybox_root.def.json

Update the JellyBOX definitions

2019-07-17 01:42:35 +02:00

imade3d_jellybox.def.json

Remove has_machine_materials and has_variant_materials

2019-08-07 10:44:02 +02:00

innovo_inventor.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

jgaurora_a1.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

jgaurora_a3s.def.json

Add JGAurora A3S (#6235)

2019-08-26 10:34:58 +02:00

jgaurora_a5.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

jgaurora_jgmaker_magic.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

jgaurora_z_603s.def.json

Align comment with the rest

2019-09-30 17:30:12 +02:00

julia.def.json

CURA-5334 remove material_diameter from all printer definitions and also from fdmprinter.def.json

2018-06-12 13:39:29 +02:00

kemiq_q2_beta.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

kemiq_q2_gama.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

kossel_mini.def.json

Make corrections to manufacturer fields

2019-07-03 11:27:19 +02:00

kossel_pro.def.json

Make corrections to manufacturer fields

2019-07-03 11:27:19 +02:00

kupido.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

makeit_pro_l.def.json

Fill in manufacturers previously set to unknown/'not applicable'.

2019-07-04 14:39:28 +02:00

makeit_pro_m.def.json

Fill in manufacturers previously set to unknown/'not applicable'.

2019-07-04 14:39:28 +02:00

makeR_pegasus.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

makeR_prusa_tairona_i3.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

maker_starter.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

makerbotreplicator.def.json

Let Makerbot Replicator use Replicator's X3G variant

2018-10-15 01:30:36 +02:00

malyan_m180.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

malyan_m200.def.json

Remove references to start_layers_at_same_position

2019-07-26 17:26:40 +02:00

mankati_fullscale_xt_plus.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

Mark2_for_Ultimaker2.def.json

Fix overriding of prime tower position

2019-10-14 11:02:43 +02:00

mendel90.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

monoprice_select_mini_v1.def.json

Add extruder definition for all single-extrusion machines

2018-06-08 17:05:31 +02:00

monoprice_select_mini_v2.def.json

Fix start g-code of Monoprice Select Mini v2

2018-07-24 09:09:26 +02:00

monoprice_ultimate.def.json

Fix manufacturer of Monoprice Ultimate

2019-08-05 10:43:49 +02:00

nwa3d_a5.def.json

Remove has_machine_materials and has_variant_materials

2019-08-07 10:44:02 +02:00

nwa3d_a31.def.json

Remove has_machine_materials and has_variant_materials

2019-08-07 10:44:02 +02:00

ord.def.json

CURA-5334 Remove machine nozzle size from machine definitions and move

2018-07-04 12:00:38 +02:00

peopoly_moai.def.json

Remove the max-z-speed-override

2019-07-03 16:13:21 +02:00

printrbot_play_heated.def.json

Add check for platform mesh & texture

2019-02-15 14:42:50 +01:00

printrbot_play.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

printrbot_simple_extended.def.json

Update printrbot_simple_extended.def.json

2019-09-02 22:14:24 +03:00

printrbot_simple_makers_kit.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

printrbot_simple.def.json

Update printrbot_simple.def.json

2019-09-02 22:20:20 +03:00

prusa_i3_mk2.def.json

Make corrections to manufacturer fields

2019-07-03 11:27:19 +02:00

prusa_i3_xl.def.json

Make corrections to manufacturer fields

2019-07-03 11:27:19 +02:00

prusa_i3.def.json

Make corrections to manufacturer fields

2019-07-03 11:27:19 +02:00

punchtec_connect_xl.def.json

CURA-5334 remove material_diameter from all printer definitions and also from fdmprinter.def.json

2018-06-12 13:39:29 +02:00

raise3D_N2_dual.def.json

Fix overriding of prime tower position

2019-10-14 11:02:43 +02:00

raise3D_N2_plus_dual.def.json

Fix overriding of prime tower position

2019-10-14 11:02:43 +02:00

raise3D_N2_plus_single.def.json

Fix overriding of prime tower position

2019-10-14 11:02:43 +02:00

raise3D_N2_single.def.json

Fix overriding of prime tower position

2019-10-14 11:02:43 +02:00

renkforce_rf100.def.json

Set default infill density for tree support to 0% in profiles

2019-04-29 12:06:54 +02:00

rigid3d_3rdgen.def.json

CURA-5334 remove material_diameter from all printer definitions and also from fdmprinter.def.json

2018-06-12 13:39:29 +02:00

rigid3d_hobby.def.json

CURA-5334 remove material_diameter from all printer definitions and also from fdmprinter.def.json

2018-06-12 13:39:29 +02:00

rigid3d_mucit.def.json

CURA-5334 Remove machine nozzle size from machine definitions and move

2018-07-04 12:00:38 +02:00

rigid3d_zero2.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

rigid3d_zero.def.json

CURA-5334 remove material_diameter from all printer definitions and also from fdmprinter.def.json

2018-06-12 13:39:29 +02:00

rigid3d.def.json

CURA-5334 remove material_diameter from all printer definitions and also from fdmprinter.def.json

2018-06-12 13:39:29 +02:00

rigidbot_big.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

rigidbot.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

robo_3d_r1.def.json

CURA-5334 remove material_diameter from all printer definitions and also from fdmprinter.def.json

2018-06-12 13:39:29 +02:00

seemecnc_artemis.def.json

Remove unused and incorrect "icon" metadata from definitions

2018-10-05 15:57:30 +02:00

seemecnc_v32.def.json

Remove unused and incorrect "icon" metadata from definitions

2018-10-05 15:57:30 +02:00

stereotech_start.def.json

Make corrections to manufacturer fields

2019-07-03 11:27:19 +02:00

stereotech_ste320.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:38:36 +02:00

strateo3d.def.json

Remove has_machine_materials and has_variant_materials

2019-08-07 10:44:02 +02:00

structur3d_discov3ry1_complete_um2plus.def.json

Remove has_machine_materials and has_variant_materials

2019-08-07 10:44:02 +02:00

tam.def.json

Rename machines with too long names

2019-07-10 13:02:14 +02:00

tevo_blackwidow.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

tevo_tarantula.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

tevo_tornado.def.json

Reduce travel jerk/acceleration and reduce print jerk slightly

2019-06-14 11:50:58 +02:00

tizyx_evy_dual.def.json

Remove has_machine_materials and has_variant_materials

2019-08-07 10:44:02 +02:00

tizyx_evy.def.json

Remove has_machine_materials and has_variant_materials

2019-08-07 10:44:02 +02:00

tizyx_k25.def.json

update profiles, qualities, variants... of TiZYX printers

2019-06-28 08:21:59 -07:00

ubuild-3d_mr_bot_280.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

ultimaker2_extended_olsson.def.json

Shorten name of UM2E with Olsson

2019-09-16 15:15:17 +02:00

ultimaker2_extended_plus.def.json

Remove UpgradeFirmware as supported machine action...

2018-10-03 21:00:23 +02:00

ultimaker2_extended.def.json

Merge branch 'feature_add_printer_layout' of https://github.com/fieldOfView/Cura

2018-10-31 14:23:42 +01:00

ultimaker2_go.def.json

Remove UM2 upgrade selection machine action

2019-09-16 15:19:47 +02:00

ultimaker2_olsson.def.json

Give Ultimaker 2 with Olsson the quality definition of the Ultimaker 2

2019-09-16 15:00:05 +02:00

ultimaker2_plus.def.json

Remove has_machine_materials and has_variant_materials

2019-08-07 10:44:02 +02:00

ultimaker2.def.json

Remove UM2 upgrade selection machine action

2019-09-16 15:19:47 +02:00

ultimaker3_extended.def.json

Add bom_numbers field to definitions

2019-09-06 16:03:26 +02:00

ultimaker3.def.json

Add bom_numbers field to definitions

2019-09-06 16:03:26 +02:00

ultimaker_original_dual.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

ultimaker_original_plus.def.json

WIP: Remove UMOCheckup MachineAction

2019-03-19 15:47:49 +01:00

ultimaker_original.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

ultimaker_s3.def.json

Fix overriding of prime tower position

2019-10-14 11:02:43 +02:00

ultimaker_s5.def.json

Fix overriding of prime tower position

2019-10-14 11:02:43 +02:00

ultimaker.def.json

Don't show Silicone for UM printers that are incompatible with it anyway

2019-03-05 15:36:31 +01:00

uni_print_3d.def.json

Added test for definition container

2018-11-23 17:01:05 +01:00

uniqbot_one.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

vertex_delta_k8800.def.json

Make corrections to manufacturer fields

2019-07-03 11:27:19 +02:00

vertex_k8400_dual.def.json

Make corrections to manufacturer fields

2019-07-03 11:27:19 +02:00

vertex_k8400.def.json

Make corrections to manufacturer fields

2019-07-03 11:27:19 +02:00

vertex_nano_k8600.def.json

Added Vertex Nano K8600 profile (#5998)

2019-07-19 10:42:01 +02:00

wanhao_d4s.def.json

Updated to reference speed_travel macro

2018-11-02 09:39:12 -04:00

wanhao_d6_plus.def.json

Updated to reference speed_travel macro

2018-11-02 09:39:12 -04:00

wanhao_d6.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

wanhao_d9.def.json

Replace travel_speed with speed_travel

2019-03-05 17:43:00 +01:00

wanhao_duplicator5S.def.json

Updated to reference speed_travel macro

2018-11-02 09:39:12 -04:00

wanhao_duplicator5Smini.def.json

Updated to reference speed_travel macro

2018-11-02 09:39:12 -04:00

wanhao_i3.def.json

Updated to reference speed_travel macro

2018-11-02 09:39:12 -04:00

wanhao_i3mini.def.json

Updated to reference speed_travel macro

2018-11-02 09:39:12 -04:00

wanhao_i3plus.def.json

Updated to reference speed_travel macro

2018-11-02 09:39:12 -04:00

winbo_dragonl4.def.json

Show prime blob by default

2019-06-06 12:31:06 +02:00

winbo_mini2.def.json

Show prime blob by default

2019-06-06 12:31:06 +02:00

winbo_superhelper105.def.json

Show prime blob by default

2019-06-06 12:31:06 +02:00

winbo_superhelper155.def.json

Create winbo_superhelper155.def.json

2018-07-24 17:15:07 +08:00

z-bolt_classic.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

z-bolt_plus.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00

zone3d_printer.def.json

Fill in manufacturers previously set to unknown/'not applicable'.

2019-07-04 14:39:28 +02:00

zyyx_agile.def.json

Overwrite gantry height value instead of default_value

2019-05-13 09:30:32 +02:00