mirror of
https://git.mirrors.martin98.com/https://github.com/Ultimaker/Cura
synced 2025-06-29 23:25:09 +08:00
79 lines
2.7 KiB
JSON
79 lines
2.7 KiB
JSON
{
|
|
"name": "Cocoon Create Touch",
|
|
"version": 2,
|
|
"inherits": "fdmprinter",
|
|
"metadata": {
|
|
"visible": true,
|
|
"author": "Thushan Fernando",
|
|
"manufacturer": "Cocoon Create",
|
|
"file_formats": "text/x-gcode",
|
|
"preferred_quality_type": "fine",
|
|
"has_materials": true,
|
|
"platform": "wanhao_200_200_platform.obj",
|
|
"platform_texture": "Cocoon-backplate.png",
|
|
"machine_extruder_trains": {
|
|
"0": "cocoon_create_touch_extruder_0"
|
|
},
|
|
"platform_offset": [
|
|
0,
|
|
-28,
|
|
0
|
|
]
|
|
},
|
|
"overrides": {
|
|
"machine_name": {
|
|
"default_value": "Cocoon Create Touch"
|
|
},
|
|
"machine_width": {
|
|
"default_value": 200
|
|
},
|
|
"machine_height": {
|
|
"default_value": 180
|
|
},
|
|
"machine_depth": {
|
|
"default_value": 200
|
|
},
|
|
"machine_heated_bed": {
|
|
"default_value": true
|
|
},
|
|
"machine_gcode_flavor": {
|
|
"default_value": "RepRap (Marlin/Sprinter)"
|
|
},
|
|
"machine_start_gcode": {
|
|
"default_value": "G21 ;metric values\n G90 ;absolute positioning\n M82 ;set extruder to absolute mode\n M107 ;start with the fan off\n G28 X0 Y0 ;move X/Y to min endstops\n G28 Z0 ;move Z to min endstops\n G1 Z15.0 F{speed_travel} ;move the platform down 15mm\n G92 E0 ;zero the extruded length\n G1 F200 E3 ;extrude 3mm of feed stock\n G92 E0 ;zero the extruded length again\n G1 F{speed_travel} \n ;Put printing message on LCD screen\n M117 Printing..."
|
|
},
|
|
"machine_end_gcode": {
|
|
"default_value": "M104 S0 ;extruder heater off \n G91 ;relative positioning\n G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\n G1 Z+0.5 E-5 X-20 Y-20 F{speed_travel} ;move Z up a bit and retract filament even more\n G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\n M84 ;steppers off\n G90 ;absolute positioning"
|
|
},
|
|
"material_diameter": {
|
|
"default_value": 1.75
|
|
},
|
|
"layer_height": {
|
|
"default_value": 0.10
|
|
},
|
|
"layer_height_0": {
|
|
"default_value": 0.2
|
|
},
|
|
"wall_thickness": {
|
|
"value": "0.8"
|
|
},
|
|
"top_bottom_thickness": {
|
|
"default_value": 0.6
|
|
},
|
|
"speed_print": {
|
|
"default_value": 50
|
|
},
|
|
"support_enable": {
|
|
"default_value": true
|
|
},
|
|
"retraction_enable": {
|
|
"default_value": true
|
|
},
|
|
"retraction_amount": {
|
|
"default_value": 4.5
|
|
},
|
|
"retraction_speed": {
|
|
"default_value": 25
|
|
}
|
|
}
|
|
} |